26" Automatic Tyre Changer with Assist Arm Complete with Fast Inflation
This Fully Automatic 26” Tyre Changer is capable of handling large rim and tyre combinations giving you a complete scope of operation including run flats and low profile tyres.
Additionally, this 26” Fully Automatic Tyre Changer comes fitted with a 3 function pneumatically controlled assist arm for helping with low profile and run flat tyres. The bead roller sits around 6 inches away from the mounting head to hold the side wall down and allow easier access with your tyre lever on the mounting head. Additionally, the rotating clamp will keep the side wall in position as the turntable rotates ensuring the bead doesn’t slip back on to the rim.
This top of the range Tyre Changer also features the fast inflate system, built into the clamping jaws to help seat those difficult tyres.
Unite U236
Additionally, this 26” Fully Automatic Tyre Changer comes fitted with a 3 function pneumatically controlled assist arm for helping with low profile and run flat tyres. The bead roller sits around 6 inches away from the mounting head to hold the side wall down and allow easier access with your tyre lever on the mounting head. Additionally, the rotating clamp will keep the side wall in position as the turntable rotates ensuring the bead doesn’t slip back on to the rim.
This top of the range Tyre Changer also features the fast inflate system, built into the clamping jaws to help seat those difficult tyres.
Unite U236
Max Wheel Diameter: 1143mm
Max Rim Width: 406mm
Rim Clamp Dia (Inner): 14"-26"
Rim Clamp Dia (Outer): 12"-23"
Working Pressure: 8-10 bar
Motor: 1.1kw
Machine Dimensions / Measurements
Footprint
Width: 505mm (20")
Depth: 760mm (30")
Working Area
Width: 1905mm (75")
Depth: 1625mm (64")
Height: 1955mm (77")
Max Rim Width: 406mm
Rim Clamp Dia (Inner): 14"-26"
Rim Clamp Dia (Outer): 12"-23"
Working Pressure: 8-10 bar
Motor: 1.1kw
Machine Dimensions / Measurements
Footprint
Width: 505mm (20")
Depth: 760mm (30")
Working Area
Width: 1905mm (75")
Depth: 1625mm (64")
Height: 1955mm (77")
This Fully Automatic 26” Tyre Changer is capable of handling large rim and tyre combinations giving you a complete scope of operation including run flats and low profile tyres.
Additionally, this 26” Fully Automatic Tyre Changer comes fitted with a 3 function assist arm for helping with low profile and run flat tyres. The bead roller sits around 6 inches away from the mounting head to hold the side wall down and allow easier access with your tyre lever on the mounting head. Additionally, the rotating clamp will keep the side wall in position as the turntable rotates ensuring the bead doesn’t slip back on to the rim.
The final part of the assist arm is a lower lifting disc to aid in the lifting of the lower bead. The tyre changer runs from a single phase supply and standard 13amp socket, and comes complete with operating instructions.
For those who have not used an assist arm machine before, we recommend a full installation and training service. All our engineers are fully trained but even better, the engineers who will carry out your training have been tyre fitters themselves so they know what they are talking about!! Not only can we give you the machinery you need but the full support as well!!
Built with the same robust material as the other machines in the Unite range this is one of the most advanced machines in the Unite machinery range. The machine will allow the user to mount and demount tyres from the majority of both passenger vehicles and light commercial vehicles such as transit vans up to a 26” rim when clamping internally and 23” externally, using the advanced pneumatically controlled locking system.
All our tyre changers, including this 24” fully automatic tyre machine with assist arm, come complete with full alloy wheel protection kit, including hardened plastic mounting head, plastic clamping jaw covers and bead breaker protection, to prevent damage on alloy wheels. If you are doing a large amount of alloy wheels, the plastic mounting head can make sure you don’t cause damage during mount and demount.
Unite U226
Additionally, this 26” Fully Automatic Tyre Changer comes fitted with a 3 function assist arm for helping with low profile and run flat tyres. The bead roller sits around 6 inches away from the mounting head to hold the side wall down and allow easier access with your tyre lever on the mounting head. Additionally, the rotating clamp will keep the side wall in position as the turntable rotates ensuring the bead doesn’t slip back on to the rim.
The final part of the assist arm is a lower lifting disc to aid in the lifting of the lower bead. The tyre changer runs from a single phase supply and standard 13amp socket, and comes complete with operating instructions.
For those who have not used an assist arm machine before, we recommend a full installation and training service. All our engineers are fully trained but even better, the engineers who will carry out your training have been tyre fitters themselves so they know what they are talking about!! Not only can we give you the machinery you need but the full support as well!!
Built with the same robust material as the other machines in the Unite range this is one of the most advanced machines in the Unite machinery range. The machine will allow the user to mount and demount tyres from the majority of both passenger vehicles and light commercial vehicles such as transit vans up to a 26” rim when clamping internally and 23” externally, using the advanced pneumatically controlled locking system.
All our tyre changers, including this 24” fully automatic tyre machine with assist arm, come complete with full alloy wheel protection kit, including hardened plastic mounting head, plastic clamping jaw covers and bead breaker protection, to prevent damage on alloy wheels. If you are doing a large amount of alloy wheels, the plastic mounting head can make sure you don’t cause damage during mount and demount.
Unite U226
Machine Dimensions / Measurements
Footprint
Width: 505mm (20")
Depth: 760mm (30")
Working Area
Width: 1905mm (75")
Depth: 1625mm (64")
Height: 1955mm (77")
Shipping Weights & Dimensions
Crated Weight: 450KG
Crated Dimensions: 120CM X 120CM X 109CM
Assembled Weight: 450KG
Assembled Dimensions: 100CM X 120CM X 200CM
Footprint
Width: 505mm (20")
Depth: 760mm (30")
Working Area
Width: 1905mm (75")
Depth: 1625mm (64")
Height: 1955mm (77")
Shipping Weights & Dimensions
Crated Weight: 450KG
Crated Dimensions: 120CM X 120CM X 109CM
Assembled Weight: 450KG
Assembled Dimensions: 100CM X 120CM X 200CM
Included:
3 way assist arm (Pneumatic control)
Pre filter and oil lubricator
Inflation Gauge
Tyre Lever 18”
Alloy Protection Kit including:
Hardened plastic mounting head
Plastic Clamping Jaw covers
Bead Breaker protection
Routine maintenance guide
Operating manual
Assembled and tested
24 Months Parts and 12 months labour warranty as standard (UK Mainland)
Optional
Motorcycle Adaptors (Set of 4)
Essential Consumable Pack
3 way assist arm (Pneumatic control)
Pre filter and oil lubricator
Inflation Gauge
Tyre Lever 18”
Alloy Protection Kit including:
Hardened plastic mounting head
Plastic Clamping Jaw covers
Bead Breaker protection
Routine maintenance guide
Operating manual
Assembled and tested
24 Months Parts and 12 months labour warranty as standard (UK Mainland)
Optional
Motorcycle Adaptors (Set of 4)
Essential Consumable Pack
