Self Adhesive Stick on Weight Strips (5 Boxes)
Special offer - These high quality stick on weights are in 5g and 10g sections and contain 60g per strip with 50 strips per box. These weights have a polished finish and are on offer at £50 for 5 boxes for a limited time only
Application of Adhesive weights
1 – Preparation work
Rotate the tyre and determine the wheel imbalance in both planes. Ideally the weight, rim and ambient temperature should be around 15 degrees centigrade as this enables the adhesive backing to perform at its best. Clean the rims with an appropriate cleaning agent to avoid grease and silicone residues on the rim.
2 – Removing the protective backing
Having identified the weight position to the rim, peel off the protective backing without touching the adhesive.
3 – Assembling the weight
Now press the weight to the rim from the middle towards the outer edges. The pressure should be applied for at least 20 seconds. After assembly 80%-90% of the final adhesive force is achieved after approx 24hrs. Full adhesive force is achieved after 72 hrs.
Application of Adhesive weights
1 – Preparation work
Rotate the tyre and determine the wheel imbalance in both planes. Ideally the weight, rim and ambient temperature should be around 15 degrees centigrade as this enables the adhesive backing to perform at its best. Clean the rims with an appropriate cleaning agent to avoid grease and silicone residues on the rim.
2 – Removing the protective backing
Having identified the weight position to the rim, peel off the protective backing without touching the adhesive.
3 – Assembling the weight
Now press the weight to the rim from the middle towards the outer edges. The pressure should be applied for at least 20 seconds. After assembly 80%-90% of the final adhesive force is achieved after approx 24hrs. Full adhesive force is achieved after 72 hrs.
