Tyre Changers and our Other Products - Tyrebay Direct Ltd.

26" Automatic Tyre Changer with assist arm complete with Fast Inflation in Unite Tyre Changers Section

This Fully Automatic 26� Tyre Changer is capable of handling large rim and tyre combinations giving you a complete scope of operation including run flats and low profile tyres. Additionally, this 26� Fully Automatic Tyre Changer comes fitted with a 3 function pneumatically controlled assist arm for helping with low profile and run flat tyres. The bead roller sits around 6 inches away from the mounting head to hold the side wall down and allow easier access with your tyre lever on the mounting head. Additionally, the rotating clamp will keep the side wall in position as the turntable rotates ensuring the bead doesn�t slip back on to the rim. This top of the range Tyre Changer also features the fast inflate system, built into the clamping jaws to help seat those difficult tyres. Unite U236

1.5 Ton Aluminium Racing Jack in Jacks Section

ALUMINIUM RACING JACK - 1.5 TON CAPACITY - ULTRA LIGHTWEIGHT COMPACT IT HAS A MINIMUM HEIGHT OF 87mm AND A MAXIMUM HEIGHT OF 445mm. ULTRA LIGHTWEIGHT COMPACT DESIGN COMES COMPLETE WITH REMOVABLE HANDLES, LOW PROFILE FRONT ROLLER AND FULL SWIVEL REAR CASTORS. ALSO FEATURES A ROLLER CAM PLUNGER SYSTEM FOR FASTER, EASIER LIFTING.

1/2" Impact Wrench in UT - Universal Tools Section

Our company has achieved its high market position by maintaining a quality product structure, an acute interest in the customer's requirements and satisfaction along with total specialisation within the Pneumatic tool market. This light duty 1/2" impact wrench produces 420nm torque and has minimum air consumption. It is best suited to general workshop use. Each tool comes complete with CE documentation, which includes a Certificate of Conformity. Speed 8,000rpm Man Torque 310 ft lbs (420Nm) Vibration Level 4.1m/sec Sound Pressure 89.1 db(a) Length 190mm Height 170mm Air Inlet 1/4 bsp

1/2" Sq DR 10 pc Socket Set in Socket Sets Section

1/2" Sq. Dr 10 piece Deep Impact Sockets Metal Boxed Sets 10, 11, 13,14,17, 19,21, 22,24, and 27mm

1/2" Sq DR 14 pc Socket Set in Socket Sets Section

1/2" Sq DR 14 pc Set which contains the following sizes: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 23, 24 mm Standard Impact Socket

1/2" Sq DR 9 pc Socket Set in Socket Sets Section

1/2" Sq DR 9 pc Set which contains the following sizes: 4,5,6,8,10,12,17,19mm Male Hex Driver

1/2" SQUARE DRIVE 40 - 210NM OR 30 - 154LB-FT RATCHET TORQUE WRENCH in Draper Section

Reversible ratchet head. The lb-ft and Nm scale is engraved on the barrel of the wrench. The micrometer type sleeve allows accurate preset torque values to be set. When torque is reached the wrench produces an audible click and a release of tension. Marked range: 30-210Nm/22.1-154.9lb-ft. Overall length 475mm. Supplied in blow mould storage case.

1/2" SQUARE DRIVE 40 - 210NM OR 30 - 154LB-FT RATCHET TORQUE WRENCH in Tyre Fitting Tools Section

1/2" SQUARE DRIVE 40 - 210NM OR 30 - 154LB-FT RATCHET TORQUE WRENCH in Workshop Tools Section

1/2" SQUARE DRIVE REVERSIBLE AIR RATCHET in Draper Section

Light duty, ratchet ideal for most automotive applications. Supplied complete in carrying case. Display carton.

Contents:
•   reversible ratchet
•   7 chrome vanadium impact sockets size: 9, 10, 11, 13, 14, 17 and 19mm
•   extension bar size: 75mm
•   3 impact screwdriver bits size: 5.5mm plain slot, No.2 cross slot and No.2 PZ TYPE
•   75mm adaptor 1/4" (F) x 1/2" sq. dr.
•   universal joint
•   oil pot
•   1/4" BSP nipple

Specification - reversible ratchet
Ultimate torque   ...   55lb-ft (75Nm)
Free speed   ...   165rpm
Operating air pressure   ...   90psi (6.2bar)
Average air consumption   ...   5.4cfm (152L/min)
Minimum hose size   ...   3/8" I.D
Air inlet   ...   1/4" BSP
Weight   ...   1.3kg (machine only)

1/2" SQUARE DRIVE REVERSIBLE AIR RATCHET in Drills, Ratchets, hammers and cut off tools Section

10 m air hose with 1/4" Female swivel ends in Air hoses and reels Section

This is a Pre Cut and packed air hose for use with air tools or for tyre inflation. It has 1/4" Inside Diametre. Fittings supplied seperatley

10 m air hose with 1/4" Female swivel ends in Air Hose and Connectors Section

This is a Pre Cut and packed air hose for use with air tools or for tyre inflation. It has 1/4" Inside Diametre. Fittings supplied seperatley

10 m air hose with 3/8" Female swivel ends in Air hoses and reels Section

This is a Pre Cut and packed air hose for use with air tools or for tyre inflation. It has 3/8" inside diameter. Fittings supplied seperatley

12 Ton Air Hydraulic Bottle Jack with Optional Manual Operation in Jacks Section

AIR HYD BOTTLE JACK 12 TON CAPACITY WITH A MINIMUM HEIGHT OF 260mm AND A MAXIMUM HEIGHT OF 500mm. AIR HYDRAULIC BOTTLE JACK OPERATES ON 90 - 150 PSI AIR PRESSURE AND FEATURES A RUGGED DESIGN WITH OPTIONAL MANUAL OPERATION.

12 Ton Bottle Jack in Jacks Section

HBJ1012CE BOTTLE JACK 12 TON CAPACITY WITH A MINIMUM HEIGHT OF 245mm AND A MAXIMUM HEIGHT OF 485mm

12" Small Diameter Refills qty 25 in Limited Availability Section

12" Small Diameter Refills qty 25

12" Tyre Lever in Tyre Fitting Tools Section

1200w x 400d x 2000h - Expansion - Levels: 3, Capacity: 18 Tyre Racking in Standard Tyre Racking Section

Specification: Dimensions: 1200w x 400d x 2000h Approx Tyre Storage Qty: 18 Quantity of Tiers: 3

1200w x 400d x 2000h - Stand Alone - Levels: 3, Capacity: 18 Tyre Racking in Standard Tyre Racking Section

Specification: Dimensions: 1200w x 400d x 2000h Approx Tyre Storage Qty: 18 Quantity of Tiers: 3

1200w x 400d x 2500h - Expansion - Levels: 4, Capacity: 24 Tyre Racking in Standard Tyre Racking Section

Specification: Dimensions: 1200w x 400d x 2500h Approx Tyre Storage Qty: 24 Quantity of Tiers: 4

1200w x 400d x 2500h - Stand Alone - Levels: 4, Capacity: 24 Tyre Racking in Standard Tyre Racking Section

Specification: Dimensions: 1200w x 400d x 2500h Approx Tyre Storage Qty: 24 Quantity of Tiers: 4

1200w x 400d x 3000h - Expansion - Levels: 5, Capacity: 30 Tyre Racking in Standard Tyre Racking Section

Specification: Dimensions: 1200w x 400d x 3000h Approx Tyre Storage Qty: 30 Quantity of Tiers: 5

1200w x 400d x 3000h - Stand Alone - Levels: 5, Capacity: 30 Tyre Racking in Standard Tyre Racking Section

Specification: Dimensions: 1200w x 400d x 3000h Approx Tyre Storage Qty: 30 Quantity of Tiers: 5

15 PIECE 1/2" SQUARE DRIVE AIR IMPACT WRENCH KIT in Draper Section

Comprising Stock No.52599 1/2 square drive Impact Wrench and accessories. Supplied complete in carrying case. Display carton.

Contents
•   impact wrench
•   10 chrome vanadium steel impact sockets size: 9, 10, 11, 13, 14, 17, 19, 22, 24 and 27mm
•   chrome vanadium steel extension bar size: 125mm
•   1/4" BSP nipple
•   mini oiler
•   oil pot

Specification - impact wrench:
Clutch type   ...   rocking dog
Bolt capacity   ...   16mm
Ultimate torque   ...   250lb-ft (339Nm)
Operating air pressure   ...   90psi (6.2bar)
Average air consumption   ...   4.0cfm (114L/min)
Minimum hose size   ...   3/8" I.D
Air inlet   ...   1/4" BSP
Weight   ...   2.4kg (machine only)

15 PIECE 1/2" SQUARE DRIVE AIR IMPACT WRENCH KIT in Air Wrenches Section

15" Ring Protector in Alloy Wheel Protector Rings Section

15" ring protector for all passenger car wheels. Simply fit the ring over wheel prior to removal or fitment of the tyre to ensure no damage to the customers wheel! The ring is simple to use and could save you the cost of replacing an alloy wheel!

1500w x 450d x 1700h - 14 Tyre Capacity Tyre Rack in Premium Tyre Racking Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 1500w x 450d x 1700h Approx Tyre Storage Qty: 14 Quantity of Tiers: 2 Price includes free delivery to your door.

1500w x 450d x 1700h - 14 Tyre Capacity Tyre Rack in Bosal Section

1500w x 450d x 1700h - Add-on Bay in Premium Tyre Racking Section

1500w x 450d x 1700h - Add-on Bay in Bosal Section

1500w x 450d x 2300h - 21 Tyre Capacity Tyre Rack in Premium Tyre Racking Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 1500w x 450d x 2300h Approx Tyre Storage Qty: 21 Quantity of Tiers: 3 Price includes free delivery to your door.

1500w x 450d x 2300h - 21 Tyre Capacity Tyre Rack in Bosal Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 1500w x 450d x 2300h Approx Tyre Storage Qty: 21 Quantity of Tiers: 3 Price includes free delivery to your door.

1500w x 450d x 2300h - Add-on Bay in Premium Tyre Racking Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 1500w x 450d x 2300h Approx Tyre Storage Qty: 21 Quantity of Tiers: 3 Price includes free delivery to your door.

1500w x 450d x 2300h - Add-on Bay in Bosal Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 1500w x 450d x 2300h Approx Tyre Storage Qty: 21 Quantity of Tiers: 3 Price includes free delivery to your door.

1500w x 450d x 2900h - 28 Tyre Capacity Tyre Rack in Premium Tyre Racking Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 1500w x 450d x 2900h Approx Tyre Storage Qty: 28 Quantity of Tiers: 4 Price includes free delivery to your door.

1500w x 450d x 2900h - 28 Tyre Capacity Tyre Rack in Bosal Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 1500w x 450d x 2900h Approx Tyre Storage Qty: 28 Quantity of Tiers: 4 Price includes free delivery to your door.

1500w x 450d x 2900h - Add-on Bay in Premium Tyre Racking Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 1500w x 450d x 2900h Approx Tyre Storage Qty: 28 Quantity of Tiers: 4 Price includes free delivery to your door.

1500w x 450d x 2900h - Add-on Bay in Bosal Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 1500w x 450d x 2900h Approx Tyre Storage Qty: 28 Quantity of Tiers: 4 Price includes free delivery to your door.

16 Piece Tyre Buffer Set in Tyre Buffing tools Section

Light duty machine giving complete flexibility for most grinding needs. Ideal for grinding and polishing metal components. Supplied complete in carrying case. Display carton.

Contents:
•   die grinder complete with 1/4" collet and safety trigger
•   5 mounted points with 3mm diameter shanks
•   5 mounted points with 6mm diameter shanks
•   1 x 3mm collet
•   1 x 6mm collet
•   1/4" BSP nipple
•   2 spanners

Specification - air die grinder:
Free speed   ...   25,000rpm
Operating air pressure   ...   90psi (6.2bar)
Average air consumption   ...   3.5cfm (100L/min)
Minimum hose size   ...   3/8" I.D
Air inlet   ...   1/4" BSP
Weight (die grinder only)   ...   0.4kg

16 Piece Tyre Buffer Set in Draper Section

16 Piece Tyre Buffer Set in Drills, Ratchets, hammers and cut off tools Section

16" Ring Protector in Alloy Wheel Protector Rings Section

16" ring protector for all passenger car wheels. Simply fit the ring over wheel prior to removal or fitment of the tyre to ensure no damage to the customers wheel! The ring is simple to use and could save you the cost of replacing an alloy wheel!

16" Ring Protector in Alloy Wheel Protector Rings Section

16" Ring Protector in Hand Tools and Accessories Section

16" Tyre Lever in Tyre Fitting Tools Section

17" Ring Protector in Alloy Wheel Protector Rings Section

17" ring protector for all passenger car wheels. Simply fit the ring over wheel prior to removal or fitment of the tyre to ensure no damage to the customers wheel! The ring is simple to use and could save you the cost of replacing an alloy wheel!

17" Ring Protector in Hand Tools and Accessories Section

17" Ring Protector in Alloy Wheel Protector Rings Section

18" Ring Protector in Alloy Wheel Protector Rings Section

18" ring protector for all passenger car wheels. Simply fit the ring over wheel prior to removal or fitment of the tyre to ensure no damage to the customers wheel! The ring is simple to use and could save you the cost of replacing an alloy wheel!

18" Ring Protector in Alloy Wheel Protector Rings Section

18" Ring Protector in Hand Tools and Accessories Section

19" Ring Protector in Alloy Wheel Protector Rings Section

19" Silver Ring protector for all passanger car wheels. Simply fit the ring over wheel prior to removal or fitment of the tyre to ensure no damage to the customers wheel!! The ring is Simple to use and could save you the cost of replacing an Alloy wheel!

2 in 1 Hand Rasp / Cement Tool in Tyre Repair Tools & Accesories Section

2 in 1 Hand Rasp / Cement Tool (straight handle) in Tyre Repair Tools & Accesories Section

2.5 Ton Trolley Jack in Jacks Section

2.5 TON GARAGE TROLLEY JACK - 2-1/2 TON CAPACITY. IT HAS A MINIMUM HEIGHT OF 130mm AND A MAXIMUM HEIGHT OF 490mm. ALL OUR GARAGE JACKS MEET 'ANSI / GS / CE STANDARDS AND ARE TESTED TO 150% OF RATED CAPACITY. THEY ARE A LIGHT COMPACT DESIGN WITH REMOVABLE HANDLE. THEY ARE ALSO FITTED WITH A SELF RETURNING SPRING DESIGNED TO MINIMISE OPERATOR EFFORTS AND ARE EASY TO SET UP AND USE.

20 ASSORTED ELASTIC STRAPS IN TUBE in Draper Section

Powerful elastic straps manufactured from virgin rubber with steel hooks. Display packed in plastic tube with screw-on lid.

Contents:
•   4 straps length 250mm (approx.) unstretched
•   4 straps length 455mm (approx.) unstretched
•   4 straps length 500mm (approx.) unstretched
•   4 straps length 600mm (approx.) unstretched
•   4 straps length 750mm (approx.) unstretched

20 ASSORTED ELASTIC STRAPS IN TUBE in Workshop Tools Section

20 ASSORTED ELASTIC STRAPS IN TUBE in General Accessories Section

20 m air hose with 3/8" Female swivel ends in Air hoses and reels Section

This is a Pre Cut and packed air hose for use with air tools or for tyre inflation. It has 3/8" inside diameter. Fittings supplied seperatley

20 Tonne, Single Lift, Air-Hydraulic Operated Jack in Weber Range of Jacks Section

Capacity(Kg) 20,000 Closed Heigh (mm) 234 Hyd Lift (mm) 150 Screw Ext' (mm) 75 Full Ext' Height (mm) 459 Net Weight Inc Handle (Kg) 15.50 Operating Pressure (Bar) 7-10

20 Tonne, Single Lift, Air-Hydraulic Operated Jack in Weber Section

Capacity(Kg) 20,000 Closed Heigh (mm) 234 Hyd Lift (mm) 150 Screw Ext' (mm) 75 Full Ext' Height (mm) 459 Net Weight Inc Handle (Kg) 15.50 Operating Pressure (Bar) 7-10

20" Ring Protector in Alloy Wheel Protector Rings Section

20" Silver Ring protector for all passanger car wheels. Simply fit the ring over wheel prior to removal or fitment of the tyre to ensure no damage to the customers wheel!! The ring is Simple to use and could save you the cost of replacing an Alloy wheel!

20" Semi Automatic Tyre Machine & Wheel Balancer Package in Tyre Machine Packages Section

Machine package 1 � save over �200 This is the ultimate value for money start up package of tyre changer, wheel balancer and consumables. Specially put together to offer Garage, MOT and new start businesses everything they need to set up a tyre fitting operation. The 20� Semi Automatic tyre machine is simple to use, and has a powerful pneumatic bead breaker included. Capable of handling rims up to 20� in diameter and complete with Alloy Wheel protector kit, this tyre changer will not only get you started but will last for years to come. Also included is the TBDU820 Wheel Balancer which has automatic data input of the offset and wheel diameter with manual data input of the wheel width. There are several ALU functions including guided weight placement as well as split and hidden weight modes as well as Motorcycle balancing modes. The Wheel Balancer has an automatic brake function after motorised spin and starts automatically when the protective hood is lowered.

20" Semi Automatic Tyre Machine & Wheel Balancer Package in Homepage Section

20" Semi Automatic Tyre Machine & Wheel Balancer Package in Tyre Changers & Balancers Section

20" Semi Automatic Tyre Machine & Wheel Balancer Package in Special Offers Section

Entry Level Machine Package � save over �250 This is the best value for money Entry Level Tyre Machine & Wheel Balancer Package of tyre changer, wheel balancer and consumables. Specially put together to offer Garage, MOT and new start businesses everything they need to set up a tyre fitting operation - including all the consumables to go with your new equipment. The 20� Semi Automatic tyre machine is simple to use, and has a powerful pneumatic bead breaker included. Capable of handling rims up to 20� in diameter and complete with Alloy Wheel protector kit, this tyre changer will not only get you started but will last for years to come. Also included is the robust, simple and easy to use TBDU108 compact hand spin wheel balancer with static, steel and ALU balancing modes. Accuracy +/- 1 gram and ideal for small workshop or mobile van installations

20" Semi Automatic Tyre Machine & Wheel Balancer Package in Homepage Section

20" Semi Automatic Tyre Machine & Wheel Balancer Package in Tyre Machine Packages Section

2000w x 450d x 1700h - 20 Tyre Capacity Tyre Rack in Premium Tyre Racking Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 2000w x 450d x 1700h Approx Tyre Storage Qty: 20 Quantity of Tiers: 2 Price includes free delivery to your door.

2000w x 450d x 1700h - 20 Tyre Capacity Tyre Rack in Bosal Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 2000w x 450d x 1700h Approx Tyre Storage Qty: 20 Quantity of Tiers: 2 Price includes free delivery to your door.

2000w x 450d x 1700h - Add-on Bay in Premium Tyre Racking Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 2000w x 450d x 1700h Approx Tyre Storage Qty: 20 Quantity of Tiers: 2 Price includes free delivery to your door.

2000w x 450d x 1700h - Add-on Bay in Bosal Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 2000w x 450d x 1700h Approx Tyre Storage Qty: 20 Quantity of Tiers: 2 Price includes free delivery to your door.

2000w x 450d x 2300h - 30 Tyre Capacity Tyre Rack in Premium Tyre Racking Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 2000w x 450d x 2300h Approx Tyre Storage Qty: 30 Quantity of Tiers: 3 Price includes free delivery to your door.

2000w x 450d x 2300h - 30 Tyre Capacity Tyre Rack in Bosal Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 2000w x 450d x 2300h Approx Tyre Storage Qty: 30 Quantity of Tiers: 3 Price includes free delivery to your door.

2000w x 450d x 2300h - Add-on Bay in Premium Tyre Racking Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 2000w x 450d x 2300h Approx Tyre Storage Qty: 30 Quantity of Tiers: 3 Price includes free delivery to your door.

2000w x 450d x 2300h - Add-on Bay in Bosal Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 2000w x 450d x 2300h Approx Tyre Storage Qty: 30 Quantity of Tiers: 3 Price includes free delivery to your door.

2000w x 450d x 2900h - 40 Tyre Capacity Tyre Rack in Premium Tyre Racking Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 2000w x 450d x 2900h Approx Tyre Storage Qty: 40 Quantity of Tiers: 4 Price includes free delivery to your door.

2000w x 450d x 2900h - 40 Tyre Capacity Tyre Rack in Bosal Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 2000w x 450d x 2900h Approx Tyre Storage Qty: 40 Quantity of Tiers: 4 Price includes free delivery to your door.

2000w x 450d x 2900h - Add-on Bay in Premium Tyre Racking Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 2000w x 450d x 2900h Approx Tyre Storage Qty: 40 Quantity of Tiers: 4 Price includes free delivery to your door.

2000w x 450d x 2900h - Add-on Bay in Bosal Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 2000w x 450d x 2900h Approx Tyre Storage Qty: 40 Quantity of Tiers: 4 Price includes free delivery to your door.

230V FLUORESCENT INSPECTION LAMP in Draper Section

Twin fluorescent lamps (11W) with useful hang-up hook. Supplied complete with 5M (approx.) of cable and 3 pin rewireable plug (13A). Spare tubes available. Display carton.

230V FLUORESCENT INSPECTION LAMP in Tyre Fitting Tools Section

Twin fluorescent lamps (11W) with useful hang-up hook. Supplied complete with 5M (approx.) of cable and 3 pin rewireable plug (13A). Spare tubes available. Display carton.

230V FLUORESCENT INSPECTION LAMP in General Accessories Section

Twin fluorescent lamps (11W) with useful hang-up hook. Supplied complete with 5M (approx.) of cable and 3 pin rewireable plug (13A). Spare tubes available. Display carton.

230V FLUORESCENT INSPECTION LAMP in Workshop Tools Section

Twin fluorescent lamps (11W) with useful hang-up hook. Supplied complete with 5M (approx.) of cable and 3 pin rewireable plug (13A). Spare tubes available. Display carton.

235mm Cross Ply Patch (Qty10) in Limited Availability Section

Supplied in boxes of 10, these large Cross ply patches are suitable for truck tyres

24" 2D Manual Wheel Balancer in Second Hand and ex Demo equipment Section

Compact hand spin wheel balancer with static, steel and ALU balancing modes. Accuracy +/- 1 gram and ideal for small workshop or mobile van installations Complete with set of 4 cones, wheel weight pliers, quick release wing nut and protective hood we offer 12 month parts warranty on this machine

24" 2D Manual Wheel Balancer in Ex Demo Tyre Machines / Changers Section

24" 2D Motorised Wheel Balancer in Ex Demo Tyre Machines / Changers Section

24" Motorised wheel balancer with automatic data input of offset and diameter with 3 ALU functions as well as split weight placement. Complete with set of 4 cones, wheel weight pliers, quick release wing nut and protective hood we offer 12 month parts warranty on this machine

24" 2D Motorised Wheel Balancer in Second Hand and ex Demo equipment Section

24" Fully Automatic 3D Wheel Balancer in Ex Demo Tyre Machines / Changers Section

Only ever used in Tyre Bay Direct warehouses. 3 months old and has changed a maximum of 25 tyres

24" Fully Automatic 3D Wheel Balancer- Unite U829 in Garage Equipment Section

Fully Automatic wheel balancer with flat screen display. Split weight function and weight placement guidance with completely automatic data input Unite U829

24" Fully Automatic 3D Wheel Balancer- Unite U829 in Tyre Changers & Balancers Section

Fully Automatic wheel balancer with flat screen display. Split weight function and weight placement guidance with completely automatic data input Unite U829

24" Fully Automatic 3D Wheel Balancer- Unite U829 in Unite Tyre Changers Section

Fully Automatic wheel balancer with flat screen display. Split weight function and weight placement guidance with completely automatic data input Unite U829

24" Fully Automatic 3D Wheel Balancer- Unite U829 in Unite Wheel Balancers Section

Fully Automatic wheel balancer with flat screen display. Split weight function and weight placement guidance with completely automatic data input Unite U829

24" Fully Automatic Tyre Machine & Wheel Balancer Package in Tyre Machine Packages Section

Machine package 3 Save over �350 This package gives you great savings if you are looking for the more advanced fully automatic tyre changer whilst still making fantastic savings. The 24 � Fully automatic model has a tilt back column and the mounting head is locked in both horizontal and vertical position using compressed air. The 24" Fully Automatic tyre changer and wheel balancer package offers an superb mid range solution for all your tyre fitting needs.

24" Fully Automatic Tyre Machine & Wheel Balancer Package in Homepage Section

24" Fully Automatic Tyre Machine & Wheel Balancer Package in Tyre Changers & Balancers Section

24" Fully Automatic Tyre Machine & Wheel Balancer Package with Tyres in Tyre Machine Packages Section

Machine package 3 � Now complete with Tyres!!! Our 24" automatic package has now been developed to include our brand new Tyre Starter Packs so that you truly have all you need to begin a tyre fitting operation. As well as the Tyre Changer, Wheel Balancer and huge selection of consumables we include a package of 24 tyres, covering the top 9 sizes based on current market sales. This package includes the most popular pack, the Budget 24 with brands such as Enduro, Fullrun, Kenda and GT. This package gives you great savings if you are looking for the more advanced fully automatic tyre changer whilst still making fantastic savings and getting the most for your money. The 24" Fully automatic model has a tilt back column and the mounting head is locked in both horizontal and vertical position using compressed air. The 24" Fully Automatic tyre changer and wheel balancer package offers a superb mid range solution for all your tyre fitting needs.

24" Fully Automatic Tyre Machine with Assist Arm & 3D Wheel Balancer Package in Homepage Section

Premium Level Machine Package � Save over �370 This is the ultimate start up package of tyre changer, 3D wheel balancer and consumables. The 24� Fully Automatic tyre machine comes complete with powerful assist arm. The assist arm has both press and roller devices to aid in the fitting of low profile and run flat tyres. Capable of handling rims up to 24� in diameter and complete with Alloy Wheel protector kit, this tyre changer will not only get you started but will make those difficult wheel and tyre combinations simple to handle. The wheel balancer is the state of the art motorised, auto data input balancer. With Standard balance functions as well as ALU modes, automatic spin cycle and +- 1 gm precision it offers fantastic performance and an incredible price.

24" Fully Automatic Tyre Machine with Assist Arm & 3D Wheel Balancer Package in Tyre Machine Packages Section

24" Fully Automatic Tyre Machine with Assist Arm & 3D Wheel Balancer Package in Special Offers Section

24" Fully Automatic Tyre Machine with Assist Arm & Wheel Balancer Package in Special Offers Section

Machine package 4 � Save over �370 This is the ultimate start up package of tyre changer, 2D wheel balancer and consumables. The 24� Fully Automatic tyre machine comes complete with powerful assist arm. The assist arm has both press and roller devices to aid in the fitting of low profile and run flat tyres. Capable of handling rims up to 24� in diameter and complete with Alloy Wheel protector kit, this tyre changer will not only get you started but will make those difficult wheel and tyre combinations simple to handle. The TBDU820 Wheel Balancer has automatic data input of the offset and wheel diameter with manual data input of the wheel width. There are several ALU functions including guided weight placement as well as split and hidden weight modes as well as Motorcycle balancing modes. The Wheel Balancer has an automatic brake function after motorised spin and starts automatically when the protective hood is lowered.

24" Fully Automatic Tyre Machine with Assist Arm & Wheel Balancer Package in Tyre Machine Packages Section

24" Fully Automatic Tyre Machine with Assist Arm & Wheel Balancer Package in Homepage Section

24" Fully Automatic Tyre Machine with Assist Arm & Wheel Balancer Package in Tyre Changers & Balancers Section

24" Fully Automatic Tyre Machine with Assist Arm , 24" 2d Wheel Balancer and Nitrogen Tyre Inflation in Tyre Machine Packages Section

Nitrogen Machine package 4 � Save over �1300 This is the ultimate start up package of tyre changer, 2D wheel balancer, Nitrogen Tyre Inflation and consumables. The 24� Fully Automatic tyre machine comes complete with powerful assist arm. The assist arm has both press and roller devices to aid in the fitting of low profile and run flat tyres. Capable of handling rims up to 24� in diameter and complete with Alloy Wheel protector kit, this tyre changer will not only get you started but will make those difficult wheel and tyre combinations simple to handle. The TBDU820 Wheel Balancer has automatic data input of the offset and wheel diameter with manual data input of the wheel width. There are several ALU functions including guided weight placement as well as split and hidden weight modes as well as Motorcycle balancing modes. The Wheel Balancer has an automatic brake function after motorised spin and starts automatically when the protective hood is lowered. The Nitrogen Tyre Inflation is suitable for retail outlets serving passenger cars and LGV's. Tyre Bay Direct works closely with Uniflate to provide the latest technologically advanced nitrogen tyre inflation system along with a professional continuing service providing an engineer advice line

24" Fully Automatic Tyre Machine with Assist Arm , 24" 2d Wheel Balancer and Nitrogen Tyre Inflation in Tyre Changers & Balancers Section

24" Fully Automatic Tyre Machine with Assist Arm , 24" 2d Wheel Balancer and Nitrogen Tyre Inflation in Special Offers Section

24" Fully Automatic Tyre Machine with Assist Arm , 24" 2d Wheel Balancer and Nitrogen Tyre Inflation in Homepage Section

24" Manual Input Wheel balancer - Unite U108 in Garage Equipment Section

Compact hand spin wheel balancer with static, steel and ALU balancing modes. Accuracy +/- 1 gram and ideal for small workshop or mobile van installations Unite U108

24" Manual Input Wheel balancer - Unite U108 in Tyre Changers & Balancers Section

Compact hand spin wheel balancer with static, steel and ALU balancing modes. Accuracy +/- 1 gram and ideal for small workshop or mobile van installations Unite U108

24" Manual Input Wheel balancer - Unite U108 in Unite Tyre Changers Section

Compact hand spin wheel balancer with static, steel and ALU balancing modes. Accuracy +/- 1 gram and ideal for small workshop or mobile van installations Unite U108

24" Manual Input Wheel balancer - Unite U108 in Unite Wheel Balancers Section

Compact hand spin wheel balancer with static, steel and ALU balancing modes. Accuracy +/- 1 gram and ideal for small workshop or mobile van installations Unite U108

24" Semi Automatic Tyre Changer in Ex Demo Tyre Machines / Changers Section

This machine has been loaned to 3 different customers over a period of 6 months for assesment purposes. Has changed a maximum of 150 tyres and has been fully cleaned and serviced

24" Semi Automatic Tyre Machine & Wheel Balancer Package in Special Offers Section

Machine package 2 � Save over �400 Similar to our Tyre Machine package 1 this combination includes the 2D Automatic wheel balancer but is supplied with the larger 24� Semi automatic tyre changer. The larger capacity of this machine gives a wider scope of operation and the ability to externally clamp up to 21�. Supplied complete with Alloy protector kit, tyre lever, pre filter and lubricator. The machine and balancer both operate from a standard 13 amp supply as do all the tyre changers in the range.

24" Semi Automatic Tyre Machine & Wheel Balancer Package in Tyre Machine Packages Section

24" Semi Automatic Tyre Machine & Wheel Balancer Package in Homepage Section

24" Semi Automatic Tyre Machine & Wheel Balancer Package in Tyre Changers & Balancers Section

24" Semi Automatic Tyre Machine & Wheel Balancer Package with Tyres in Tyre Machine Packages Section

Machine package 2 � Now complete with Tyres!!! One of our most popular packages has now been developed to include our brand new Tyre Starter Packs so you truly have all you need to begin a tyre fitting operation. As well as the Tyre Changer, Wheel Balancer and huge selection of consumables we include 24 tyres, covering the top 9 sizes based on current market sales. This package includes the most popular pack, the Budget 24 with brands such as Enduro, Fullrun, Kenda and GT. This Package combination includes the 2D Automatic wheel balancer but is supplied with the larger 24� Semi automatic tyre changer. Supplied complete with alloy wheel protection, tyre lever, and pre filter and lubricator the machine and balancer both operate from a standard 13 amp supply as do all the tyre changers in the range.

24" Tyre Lever in Tyre Fitting Tools Section

24" Wheel balancer Unite U820 and Automatic Tyre Changer with assist arm 24" Unite U226 in Section

Unite U820 This fully motorised wheel balancer is the most user friendly wheel balancer we offer and is by far the most popular in our range. Suitable for balancing passenger, LGV and motorcycle wheel / tyre combinations (adaptors required for certain applications), the machine itself has a balancing accuracy of within 1 gram. The TBDU820 has automatic data input of the offset and wheel diameter with manual data input of the wheel width. There are several ALU functions including guided weight placement as well as split and hidden weight modes as well as Motorcycle balancing modes. The Wheel Balancer has an automatic brake function after motorised spin and starts automatically when the protective hood is lowered. Unite U226 This Fully Automatic 24� Tyre Changer is capable of handling large rim and tyre combinations giving you a complete scope of operation including run flats and low profile tyres. Additionally, this 24� Fully Automatic Tyre Changer comes fitted with a 3 function assist arm for helping with low profile and run flat tyres. The bead roller sits around 6 inches away from the mounting head to hold the side wall down and allow easier access with your tyre lever on the mounting head. Additionally, the rotating clamp will keep the side wall in position as the turntable rotates ensuring the bead doesn�t slip back on to the rim.

24" Wheel balancer- Unite U820 in Garage Equipment Section

This fully motorised wheel balancer is the most user friendly wheel balancer we offer and is by far the most popular in our range. Suitable for balancing passenger, LGV and motorcycle wheel / tyre combinations (adaptors required for certain applications), the machine itself has a balancing accuracy of within 1 gram. The TBDU820 has automatic data input of the offset and wheel diameter with manual data input of the wheel width. There are several ALU functions including guided weight placement as well as split and hidden weight modes as well as Motorcycle balancing modes. The Wheel Balancer has an automatic brake function after motorised spin and starts automatically when the protective hood is lowered. Unite U820

24" Wheel balancer- Unite U820 in Unite Wheel Balancers Section

24" Wheel balancer- Unite U820 in Unite Tyre Changers Section

24" Wheel balancer- Unite U820 in Tyre Changers & Balancers Section

24PSI valve in 414 PSI valves Section

This exclusive, unique design of customised valve will provide your customers with the information of their tyre pressure on their valves! This service provides your customers with information that will make re-filling their tyres a quick and easy job. Thus preventing the problem of over or under inflation. Supplied in Bags of 50.

24PSI valve in 418 PSI valves Section

26" Commercial Tyre Changer for Truck and Bus in Unite Tyre Changers Section

26" Automatic electrohydraulic Tyre Machine for use on Truck Bus and limited passenger wheel tyre combinations. The machine features a moveable control unit with Hydraulic motor which has a pressure adjustment device. There is the ability to adjust the clamping force on the machine and the clamp range is 14"-26" and moves in both the clockwise and anti-clockwise directions. Automatic fast turning and the ability to operate the lifting arm and tool carrier simultaneously means that this machine is a simple and effective piece of equipment at an unbeatable price. Backed with the renowned Unite quality and service, 2 year warranty as standard and the price including delivery to main land UK this is amazing value.

26" Commercial Tyre Changer for Truck and Bus in Commercial Tyre Machinery Section

26PSI valve in 414 PSI valves Section

26PSI valve in 418 PSI valves Section

28PSI valve in 414 PSI valves Section

28PSI valve in 418 PSI valves Section

28� Semi Automatic Tyre Changer with double assist arms- Unite U2098 in Garage Equipment Section

A new addition to the Unite range, offered exclusively by Tyre Bay Direct! This the awesome 28� Semi Automatic Tyre Changer with double assist arms has been specifically designed for the American market. It has the same robust design and build quality as all Unite Tyre Changers but has the increased table capacity to handle 28� rims internal clamping and 26� External Clamping. With its semi automatic operation, this tyre machine offers great value whilst being able to cope easily with some larger tyre and rim combinations. With a fully motorised turntable, pneumatically operated clamping jaws and powerful Pneumatic bead breaker with over 2.5 tonnes of force, this is the kind of Tyre Fitting Equipment that is going to stand you in good stead for years to come. The swing arm design of this tyre changer allows manual setting of the horizontal and vertical mounting head position using the locking lever. The steel mounting head supplied with the machine is ideal for standard tyre fitting work and has integrated alloy protection as well. Specifically designed to allow reduced bead stress during the mount and demount process. All our tyre changers, including this 28� swing arm tyre machine, come complete with full alloy wheel protection kit, including hardened plastic mounting head, plastic clamping jaw covers and bead breaker protection, to prevent damage on alloy wheels. If you are doing a large amount of alloy wheels, the plastic mounting head can make sure you don�t cause damage during mount and demount. The tyre changer runs from a single phase supply and standard 13amp socket, so set up is as easy as plugging in and connecting to the air. Alternatively, for those just starting out in Tyre Fitting, we offer a full installation and training on all Tyre Equipment from our fully qualified engineers. All our engineers are fully trained but even better, the engineers who will carry out your training have been tyre fitters themselves so they know what they are talking about!! Not only can we give you the machinery you need but the full support as well!! Unite U2098

28� Semi Automatic Tyre Changer with double assist arms- Unite U2098 in Tyre Changers & Balancers Section

28� Semi Automatic Tyre Changer with double assist arms- Unite U2098 in Unite Tyre Changers Section

28� Semi Automatic Tyre Changer with double assist arms- Unite U2098 in Second Hand and ex Demo equipment Section

29PSI valve in 414 PSI valves Section

29PSI valve in 418 PSI valves Section

3 boxes Self Adhesive Weight Strips (Box 50), 1 ltr Buffing Solution & Self Adhesive Weight Remover in Self Adhesive Weights Section

3 boxes High quality self-adhesive wheel weight strips, 60g strips divided into 5g sections 1 Ltr of Buffing Solution 1 Self Adhesive Weight Remover

3 boxes Self Adhesive Weight Strips (Box 50), 1 ltr Buffing Solution & Self Adhesive Weight Remover in Special Offers Section

3 boxes High quality self-adhesive wheel weight strips, 60g strips divided into 5g sections 1 Ltr of Buffing Solution 1 Self Adhesive Weight Remover

3 in 1 Digital Tyre Pressure Gauge in General Accessories Section

This 3-in-1 Digital Tyre Pressure and Tread Depth Gauge with light is self-calibrating and features a 90 second auto power off. Easy to use, it displays an illegal tyre tread depth warning. The stylish blue light is ideal for working in dark or low light areas. Technical Specification: Tyre Pressure Accuracy: � 1.5% Tyre Pressure Reading Measurements: 0.5 psi/0.05 bar/10kPa Tyre Tread Accuracy: �0.3mm Tyre Tread Reading Measurements: 0.1mm

3 in 1 Digital Tyre Pressure Gauge in Gauges Section

3/4" Impact Wrench in Air Wrenches Section

3/4" Square Drive 1350 max torque 5.2 kg 4.96 m/s vibration

3/4" SQUARE DRIVE 70 - 395NM OR 51.6 - 291LB-FT RATCHET TORQUE WRENCH in Draper Section

Reversible ratchet head. Nm and lb-ft engraved on the barrel of the wrench with a micrometer type sleeve, allowing accurate preset torque values to be set. When torque is reached the wrench produces an audible click and a release of tension. Marked range: 70-395Nm/51.6-291 lb-ft. Overall length 670mm. Supplied in blow mould storage case.

3/4" SQUARE DRIVE 70 - 395NM OR 51.6 - 291LB-FT RATCHET TORQUE WRENCH in Tyre Fitting Tools Section

3/4" SQUARE DRIVE 70 - 395NM OR 51.6 - 291LB-FT RATCHET TORQUE WRENCH in General Accessories Section

3/4" SQUARE DRIVE 70 - 395NM OR 51.6 - 291LB-FT RATCHET TORQUE WRENCH in Drills, Ratchets, hammers and cut off tools Section

3/4" SQUARE DRIVE 70 - 395NM OR 51.6 - 291LB-FT RATCHET TORQUE WRENCH in Workshop Tools Section

30 Ton Bottle Jack in Jacks Section

BOTTLE JACK 30 TON CAPACITY WITH A MINIMUM HEIGHT OF 285mm AND A MAXIMUM HEIGHT OF 465mm

3000w x 450d x 1700h - 30 Tyre Capacity Tyre Rack in Premium Tyre Racking Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 3000w x 450d x 1700h Approx Tyre Storage Qty: 30 Quantity of Tiers: 2 Price includes free delivery to your door.

3000w x 450d x 1700h - 30 Tyre Capacity Tyre Rack in Bosal Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 3000w x 450d x 1700h Approx Tyre Storage Qty: 30 Quantity of Tiers: 2 Price includes free delivery to your door.

3000w x 450d x 1700h - Add-on Bay in Premium Tyre Racking Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 3000w x 450d x 1700h Approx Tyre Storage Qty: 30 Quantity of Tiers: 2 Price includes free delivery to your door.

3000w x 450d x 1700h - Add-on Bay in Bosal Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 3000w x 450d x 1700h Approx Tyre Storage Qty: 30 Quantity of Tiers: 2 Price includes free delivery to your door.

3000w x 450d x 2300h - 45 Tyre Capacity Tyre Rack in Premium Tyre Racking Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 3000w x 450d x 2300h Approx Tyre Storage Qty: 45 Quantity of Tiers: 3 Price includes free delivery to your door.

3000w x 450d x 2300h - 45 Tyre Capacity Tyre Rack in Bosal Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 3000w x 450d x 2300h Approx Tyre Storage Qty: 45 Quantity of Tiers: 3 Price includes free delivery to your door.

3000w x 450d x 2300h - Add-on Bay in Premium Tyre Racking Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 3000w x 450d x 2300h Approx Tyre Storage Qty: 45 Quantity of Tiers: 3 Price includes free delivery to your door.

3000w x 450d x 2300h - Add-on Bay in Bosal Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 3000w x 450d x 2300h Approx Tyre Storage Qty: 45 Quantity of Tiers: 3 Price includes free delivery to your door.

3000w x 450d x 2900h - 60 Tyre Capacity Tyre Rack in Premium Tyre Racking Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 3000w x 450d x 2900h Approx Tyre Storage Qty: 60 Quantity of Tiers: 4 Price includes free delivery to your door.

3000w x 450d x 2900h - 60 Tyre Capacity Tyre Rack in Bosal Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 3000w x 450d x 2900h Approx Tyre Storage Qty: 60 Quantity of Tiers: 4 Price includes free delivery to your door.

3000w x 450d x 2900h - Add-on Bay in Premium Tyre Racking Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 3000w x 450d x 2900h Approx Tyre Storage Qty: 60 Quantity of Tiers: 4 Price includes free delivery to your door.

3000w x 450d x 2900h - Add-on Bay in Bosal Section

These tyre racking solutions incorporate tubular bars for its beams allowing easy removal of the tyres and less tyre marking on tyres stored over very long periods of time. The Bosal Tyre racking uses a multi-tier design allowing for economic use of any space available. These tyre racks come in 2, 3 and 4 high tiers and can store up to 60 tyres per rack. These racks simple assemble and can be fixed to the floor with the included floor fixings. Specification: Dimensions: 3000w x 450d x 2900h Approx Tyre Storage Qty: 60 Quantity of Tiers: 4 Price includes free delivery to your door.

30m PCL hose with PCL 100 series fittings 1/2" bore in PCL - Pneumatic Components Ltd Section

30m PCL hose with PCL 100 series fittings and 1/2" bore.

30m PCL hose with PCL 100 series fittings 1/2" bore in Air Hose and Connectors Section

30m PCL hose with PCL 100 series fittings and 1/2" bore.

30m PCL hose with PCL 100 series fittings 1/2" bore in Air hoses and reels Section

30m PCL hose with PCL 100 series fittings and 1/2" bore.

30PSI valve in 414 PSI valves Section

30PSI valve in 418 PSI valves Section

32" Tyre Lever in Tyre Fitting Tools Section

32PSI valve in 414 PSI valves Section

32PSI valve in 418 PSI valves Section

34PSI valve in 414 PSI valves Section

34PSI valve in 418 PSI valves Section

35 mm Universal Tyre Repair Patches (Qty 100) in Limited Availability Section

High Quality Universal tyre repair patch with 35mm effective area. For use on Tubeless Radial and Crossply tyres.

36L TELESCOPIC OIL DRAINER in Draper Section

For use in the workshop for the collection of old or contaminated oil during an oil change. The Oil Drainer is wheeled under the sump plug of the vehicle when on an inspection ramp, the plug is removed and the oil flows by gravity into the plastic reservoir via a filtered funnel 410mm diameter. Screw cap for reservoir. Height adjusts from 760 to 1600mm. Display carton.

36L TELESCOPIC OIL DRAINER in General Accessories Section

36L TELESCOPIC OIL DRAINER in Workshop Tools Section

36PSI valve in 414 PSI valves Section

36PSI valve in 418 PSI valves Section

390mm Cross Ply Patch (Qty5) in Limited Availability Section

Supplied in boxes of 5, these are the largest patch available with an effective area of nearly 400 mm.

3mm Carbide Cutter in Tyre Repair Tools & Accesories Section

4 in 1 Tyre Valve Tool Silver in Tyre Fitting Tools Section

Tyre valve tool silver

4" Large Diameter Chemical Cure-Blue Wrapped in Limited Availability Section

4" Large Diameter Chemical Cure-Blue Wrapped

4" Small Diameter Chemical Cure-Red Wrapped in Limited Availability Section

4" Small Diameter Chemical Cure-Red Wrapped

400ml Mr D's MOISTURE DISPERSANT in Draper Section

Dual purpose moisture and penetrating oil, suitable for dispersing moisture from electrical systems and as a general lubricating and penetrating oil. Sold loose.

400ml Mr D's MOISTURE DISPERSANT in Tyre Repair Chemicals Section

Dual purpose moisture and penetrating oil, suitable for dispersing moisture from electrical systems and as a general lubricating and penetrating oil. Sold loose.

400ml Mr D's MOISTURE DISPERSANT in Tyre Fitting Chemicals Section

Dual purpose moisture and penetrating oil, suitable for dispersing moisture from electrical systems and as a general lubricating and penetrating oil. Sold loose.

400ml SILICONE LUBRICANT in Draper Section

Colourless and non-toxic anti-static lubricant ideal for use on metals, plastics, vinyl, rubber and wood. Safe for use on food machinery. CFC free. Sold loose.

400ml SILICONE LUBRICANT in Tyre Repair Chemicals Section

Colourless and non-toxic anti-static lubricant ideal for use on metals, plastics, vinyl, rubber and wood. Safe for use on food machinery. CFC free. Sold loose.

400ml SILICONE LUBRICANT in Tyre Fitting Chemicals Section

Colourless and non-toxic anti-static lubricant ideal for use on metals, plastics, vinyl, rubber and wood. Safe for use on food machinery. CFC free. Sold loose.

5 Ton Long Reach Trolley Jack in Jacks Section

LONG-DUTY GARAGE JACK - 5 TON CAPACITY IT HAS A MINIMUM HEIGHT OF 160mm AND A MAXIMUM HEIGHT OF 560mm. FEATURES A HEAVY DUTY DESIGN AND IS INDIVIDUALLY TESTED TO 150% OF RATED CAPACITY. COMES COMPLETE WITH REMOVABLE HANDLE, FULL SWIVEL REAR CASTORS AND SELF RETURNING SPRING DESIGN TO MINIMIZE OPERATORS EFFORT.

525M Bolt in Metal valves, 11.5mm - Nickel plated in Specialist Valves Section

Bolt in nickel plated valves to fit 11.5mm rim. Equivalent to TR416S suitable for car wheels.

55mm Tube Repair Patch (Qty 30) in Limited Availability Section

High quality Repair Patches for Tubes.

6mm Carbide Cutter in Tyre Repair Tools & Accesories Section

750G RUBBER MALLET WITH FIBRE GLASS SHAFT in Draper Section

With rubber head, fibreglass shaft with shock-absorbing rubber hand grip. Particularly useful for use when laying paving etc. Sold loose.

750G RUBBER MALLET WITH FIBRE GLASS SHAFT in Tyre Fitting Tools Section

With rubber head, fibreglass shaft with shock-absorbing rubber hand grip. Particularly useful for use when laying paving etc. Sold loose.

750G RUBBER MALLET WITH FIBRE GLASS SHAFT in General Accessories Section

With rubber head, fibreglass shaft with shock-absorbing rubber hand grip. Particularly useful for use when laying paving etc. Sold loose.

750G RUBBER MALLET WITH FIBRE GLASS SHAFT in Workshop Tools Section

With rubber head, fibreglass shaft with shock-absorbing rubber hand grip. Particularly useful for use when laying paving etc. Sold loose.

75mm Tube Repair Patch (Qty 20) in Limited Availability Section

High quality Repair Patches for Tubes.

75MM TWISTED WIRE WHEEL in Draper Section

Heavy duty wheel with integral 6mm shank. For descaling, deburring, removing rust, adhesive residues and preparing/cleaning welding seams. Display packed.

75MM TWISTED WIRE WHEEL in Tyre Repair Accessories Section

Heavy duty wheel with integral 6mm shank. For descaling, deburring, removing rust, adhesive residues and preparing/cleaning welding seams. Display packed.

75MM TWISTED WIRE WHEEL in Tyre Repair Tools & Accesories Section

Heavy duty wheel with integral 6mm shank. For descaling, deburring, removing rust, adhesive residues and preparing/cleaning welding seams. Display packed.

75MM TWISTED WIRE WHEEL in General Accessories Section

Heavy duty wheel with integral 6mm shank. For descaling, deburring, removing rust, adhesive residues and preparing/cleaning welding seams. Display packed.

75MM WIRE BRUSH in Draper Section

Brassed crimped steel wire with 6mm diameter shank. Display packed.

75MM WIRE BRUSH in Tyre Repair Accessories Section

Brassed crimped steel wire with 6mm diameter shank. Display packed.

75MM WIRE BRUSH in Tyre Repair Tools & Accesories Section

Brassed crimped steel wire with 6mm diameter shank. Display packed.

8 CCD Computerised Wheel Alignment System in Wheel Alignment Section

This outstanding Computerised wheel alignment system offers state of the art alignment with full colour print out for wheel ranges 11" - 25". Standard with the machine is your wheeled cabinet and mainframe computer with 17" LCD screen, colour printer and Windows 7 operating platform. The system offers multi lingual audio guidance as well as a stunning 3D instructional training video. The 4 sensors, all 8 CCD have touch key interface with Lithium batteries offering extended capacity and battery life. Also included are the 4 universal self centering clamps with the range of 11"-25", mechanical turn plates, steering wheel lock and brake depressor. Some of the other technical features of the system include; New generation wireless communication Dual wired and wireless control option Data Freeze program to ensure no data loss Lift calibration and compensation Data of over 20,000 vehicles through Auto Data UK data base Self diagnostic and repair Black Box recorder Work effciency management program. The Machine comes with a full 12 month parts and labour warranty and 10 year parts availability promise. Available at a special price for a limited time only!!!

8" Large Diameter Re-fills qty 30 in Limited Availability Section

8" Large Diameter Re-fills qty 30

80mm Cross Ply Patch (Qty20) in Limited Availability Section

For durable repairs on a cross ply tyre

8mm Carbide Cutter in Tyre Repair Tools & Accesories Section

8mm Combi Repair Plugs (Qty 20) in Limited Availability Section

9 PIECE AIR HAMMER KIT in Draper Section

Light duty, short stroke hammer kit comprising a full range of accessories including panel cutter, rivet cutter, bush splitter, spot weld splitter and piercing cutter. Other individual cutters are available separately. Supplied complete in carrying case. Display carton.

Contents:
•   air hammer
•   5 chisels
•   chisel retaining spring
•   oil pot
•   1/4" BSP nipple

Specification - air hammer:
Chisel shank opening   ...   10.18mm
Blows per minute   ...   3600
Stroke length   ...   66.6mm
Operating air pressure   ...   90psi (6.2bar)
Average air consumption   ...   4.1cfm (116L/min)
Minimum hose size   ...   3/8" I.D
Air inlet   ...   1/4" BSP
Weight (hammer only)   ...   1.5 kg

9 PIECE AIR HAMMER KIT in Drills, Ratchets, hammers and cut off tools Section

ABAC Belt Drive Compressor - Blue Line Professional B312/100S in Automotive Compressors Section

The ABAC range of automotive compressors guarantee you quality, reliability and efficiency in all the products which have been specifically designed to offer you the best solution to your Industrial, Professional and Automotive requirements. All ABAC automotive compressors are manufactured to the highest specification and in accordance with stringent international standards. # Fitted With Genuine High Quality Abac Compressor Pump Unit # Slow Running For Long Life And Quieter Operation # Superior Cooling For High Efficiency And Improved Output # High Quality Heavy Duty Electric Motor # Full Overload Protection # Fully Automatic Control # Reliable and durable # Advanced design # Comprehensive specification # Economical and efficient # Manufactured in compliance with CE directive # Comprehensive 1 Year Warranty Capacity 12 cfm 340 lt/min Pressure 10 bar 145 psi Motor 3 HP 2.2 kW Receiver 100 litre Drive Belt Drive Voltage 230 V

ABAC Belt Drive Compressor - Blue Line Professional B312/100S in Abac Compressors Section

ABAC Belt Drive Compressor - Blue Line Professional B3915/200T in Automotive Compressors Section

The ABAC range of automotive compressors guarantee you quality, reliability and efficiency in all the products which have been specifically designed to offer you the best solution to your Industrial, Professional and Automotive requirements. All ABAC automotive compressors are manufactured to the highest specification and in accordance with stringent international standards. # Fitted With Genuine High Quality Abac Compressor Pump Unit # Slow Running For Long Life And Quieter Operation # Superior Cooling For High Efficiency And Improved Output # High Quality Heavy Duty Electric Motor # Full Overload Protection # Fully Automatic Control # Reliable and durable # Advanced design # Comprehensive specification # Economical and efficient # Manufactured in compliance with CE directive # Comprehensive 1 Year Warranty Capacity 15 cfm 430 lt/min Pressure 10 bar 145 psi Motor 3 HP 2.2 kW Receiver 200 litre Drive Belt Drive Voltage 230 V

ABAC Belt Drive Compressor - Blue Line Professional B3915/200T in ABAC Blue Line Professional Belt Drive Compressors 1.5-7.5kW (2-10HP) Section

The ABAC range of automotive compressors guarantee you quality, reliability and efficiency in all the products which have been specifically designed to offer you the best solution to your Industrial, Professional and Automotive requirements. All ABAC automotive compressors are manufactured to the highest specification and in accordance with stringent international standards. # Fitted With Genuine High Quality Abac Compressor Pump Unit # Slow Running For Long Life And Quieter Operation # Superior Cooling For High Efficiency And Improved Output # High Quality Heavy Duty Electric Motor # Full Overload Protection # Fully Automatic Control # Reliable and durable # Advanced design # Comprehensive specification # Economical and efficient # Manufactured in compliance with CE directive # Comprehensive 1 Year Warranty Capacity 15 cfm 430 lt/min Pressure 10 bar 145 psi Motor 3 HP 2.2 kW Receiver 200 litre Drive Belt Drive Voltage 230 V

ABAC Belt Drive Compressor - Blue Line Professional B3915/200T in Abac Compressors Section

The ABAC range of automotive compressors guarantee you quality, reliability and efficiency in all the products which have been specifically designed to offer you the best solution to your Industrial, Professional and Automotive requirements. All ABAC automotive compressors are manufactured to the highest specification and in accordance with stringent international standards. # Fitted With Genuine High Quality Abac Compressor Pump Unit # Slow Running For Long Life And Quieter Operation # Superior Cooling For High Efficiency And Improved Output # High Quality Heavy Duty Electric Motor # Full Overload Protection # Fully Automatic Control # Reliable and durable # Advanced design # Comprehensive specification # Economical and efficient # Manufactured in compliance with CE directive # Comprehensive 1 Year Warranty Capacity 15 cfm 430 lt/min Pressure 10 bar 145 psi Motor 3 HP 2.2 kW Receiver 200 litre Drive Belt Drive Voltage 230 V

ABAC Belt Drive Compressor - Blue Line Professional B5924/200 in Automotive Compressors Section

The ABAC range of automotive compressors guarantee you quality, reliability and efficiency in all the products which have been specifically designed to offer you the best solution to your Industrial, Professional and Automotive requirements. All ABAC automotive compressors are manufactured to the highest specification and in accordance with stringent international standards. # Fitted With Genuine High Quality Abac Compressor Pump Unit # Slow Running For Long Life And Quieter Operation # Superior Cooling For High Efficiency And Improved Output # High Quality Heavy Duty Electric Motor # Full Overload Protection # Fully Automatic Control # Reliable and durable # Advanced design # Comprehensive specification # Economical and efficient # Manufactured in compliance with CE directive # Comprehensive 1 Year Warranty Capacity 24 cfm 690 lt/min Pressure 10 bar 145 psi Motor 5.5 HP 4 kW Receiver 200 litre Drive Belt Drive Voltage 400 V

ABAC Belt Drive Compressor - Blue Line Professional B5924/200 in Abac Compressors Section

The ABAC range of automotive compressors guarantee you quality, reliability and efficiency in all the products which have been specifically designed to offer you the best solution to your Industrial, Professional and Automotive requirements. All ABAC automotive compressors are manufactured to the highest specification and in accordance with stringent international standards. # Fitted With Genuine High Quality Abac Compressor Pump Unit # Slow Running For Long Life And Quieter Operation # Superior Cooling For High Efficiency And Improved Output # High Quality Heavy Duty Electric Motor # Full Overload Protection # Fully Automatic Control # Reliable and durable # Advanced design # Comprehensive specification # Economical and efficient # Manufactured in compliance with CE directive # Comprehensive 1 Year Warranty Capacity 24 cfm 690 lt/min Pressure 10 bar 145 psi Motor 5.5 HP 4 kW Receiver 200 litre Drive Belt Drive Voltage 400 V

ABAC Belt Drive Compressor - Red Line 350/100P in Automotive Compressors Section

ABAC Belt Drive Compressor - Red Line 350/100P in Abac Compressors Section

ABAC Belt Drive Compressor - Red Line 400/150 in ABAC Redline Economy Belt Drive Compressors 2.2-4.0kW (3-5.5HP) Section

ABAC Belt Drive Compressor - Red Line 400/150 in Abac Compressors Section

ABAC Belt Drive Compressor - Red Line 400/200 in ABAC Redline Economy Belt Drive Compressors 2.2-4.0kW (3-5.5HP) Section

ABAC Belt Drive Compressor - Red Line 400/200 in Abac Compressors Section

ABAC Belt Drive Compressor - Red Line 600/200 in ABAC Redline Economy Belt Drive Compressors 2.2-4.0kW (3-5.5HP) Section

ABAC Belt Drive Compressor - Red Line 600/200 in Abac Compressors Section

ABAC Petrol Driven Compressor - B38/5.5/100 in ABAC Petrol & Diesel Driven Compressor Range 3-10HP Section

The ABAC range of automotive compressors guarantee you quality, reliability and efficiency in all the products which have been specifically designed to offer you the best solution to your Industrial, Professional and Automotive requirements. All ABAC automotive compressors are manufactured to the highest specification and in accordance with stringent international standards. 1) Engine powered compressors provide air anywhere 2) Electric start option 3) Constant run control as standard 4) Main features as commercial range compressors Capacity 15 cfm 430 lt/min Pressure 10 bar 145 psi Motor 5.5 HP Receiver 100 litre Drive Belt Drive Honda Petrol Engine

ABAC Petrol Driven Compressor - B38/5.5/100 in Abac Compressors Section

The ABAC range of automotive compressors guarantee you quality, reliability and efficiency in all the products which have been specifically designed to offer you the best solution to your Industrial, Professional and Automotive requirements. All ABAC automotive compressors are manufactured to the highest specification and in accordance with stringent international standards. 1) Engine powered compressors provide air anywhere 2) Electric start option 3) Constant run control as standard 4) Main features as commercial range compressors Capacity 15 cfm 430 lt/min Pressure 10 bar 145 psi Motor 5.5 HP Receiver 100 litre Drive Belt Drive Honda Petrol Engine

ABAC Petrol Driven Compressor - B59/9/200S in ABAC Petrol & Diesel Driven Compressor Range 3-10HP Section

ABAC Petrol Driven Compressor - B59/9/200S in Abac Compressors Section

ABAC Petrol Driven Compressor - B59/9/200S in ABAC Petrol & Diesel Driven Compressor Range 3-10HP Section

ABAC Petrol Driven Compressor - B59/9/200S in Abac Compressors Section

ABAC Petrol Driven Compressor - B59/9/200S in Special Offers Section

ABAC Petrol Driven Compressor - B60/9/200ES in ABAC Petrol & Diesel Driven Compressor Range 3-10HP Section

ABAC Petrol Driven Compressor - B60/9/200ES in Abac Compressors Section

ABAC Rotary Screw Compressor - Genesis 11/10 in Rotary Screw Automotive Compressors Section

ABAC Rotary Screw Compressor - Genesis 5.5/10 in Rotary Screw Automotive Compressors Section

ABAC Rotary Screw Compressor - Genesis 7.5/10 in Rotary Screw Automotive Compressors Section

ABAC Silenced Belt Drive Compressor - B4900/4T/270 in Silenced Belt Drive Compressors Section

* Belt driven * Low noise with attractive acoustically designed cabinet * Fitted with genuine high quality ABAC compressor pump unit * Slow running compressor for long life and quieter operation * Superior cooling for high efficiency and improved output * High quality heavy duty electric motor with full overload protection * Fully automatic control * Comprehensive 12 month warranty with nation wide back up * LOW NOISE - The LN Series machine features very low operating noise levels 64-68dB(A), they can therefore be sited in the most convenient location even in the vicinity of personnel * LOW MAINTENANCE - The LN Series is a packaged version of the world�s most successful reciprocating air compressor. Simple design and convenient access allows ease of maintenance * RELIABILITY - The LN Series features rugged design with efficient cooling and low speed compressor pump unit providing reliability and durability * EASE OF INSTALLATION - The LN Series provides a silent, easily manoeuvred and convenient air compressor that can be installed easily in any suitable location * SAFETY - All components are enclosed within the attractive cabinet, this along with the standard safety features provide optimum operator protection. Capacity 19 cfm 550 lt/min Pressure 11 bar 160 psi Motor 4 HP 3 kW Receiver 270 litre Voltage: 400v Silenced Belt Drive

ABAC Silenced Belt Drive Compressor - B5900/LN/5.5/270 in Silenced Belt Drive Compressors Section

* Belt driven * Low noise with attractive acoustically designed cabinet * Fitted with genuine high quality ABAC automotive compressor pump unit * Slow running automotive compressor for long life and quieter operation * Superior cooling for high efficiency and improved output * High quality heavy duty electric motor with full overload protection * Fully automatic control * Comprehensive 12 month warranty with nation wide back up * LOW NOISE - The LN Series machine features very low operating noise levels 64-68dB(A), they can therefore be sited in the most convenient location even in the vicinity of personnel * LOW MAINTENANCE - The LN Series is a packaged version of the world�s most successful reciprocating air compressor. Simple design and convenient access allows ease of maintenance * RELIABILITY - The LN Series features rugged design with efficient cooling and low speed compressor pump unit providing reliability and durability * EASE OF INSTALLATION - The LN Series provides a silent, easily manoeuvred and convenient air compressor that can be installed easily in any suitable location * SAFETY - All components are enclosed within the attractive cabinet, this along with the standard safety features provide optimum operator protection. Capacity 24 cfm 690 lt/min Pressure 11 bar 160 psi Motor 5.5 HP 4 kW Receiver 270 litre Voltage: 400v Silenced Belt Drive

ABAC Silenced Belt Drive Compressor - B6000/LN/7.5/500 in Silenced Belt Drive Compressors Section

* Belt driven * Low noise with attractive acoustically designed cabinet * Fitted with genuine high quality ABAC automotive compressor pump unit * Slow running compressor for long life and quieter operation * Superior cooling for high efficiency and improved output * High quality heavy duty electric motor with full overload protection * Fully automatic control * Comprehensive 12 month warranty with nation wide back up * LOW NOISE - The LN Series machine features very low operating noise levels 64-68dB(A), they can therefore be sited in the most convenient location even in the vicinity of personnel * LOW MAINTENANCE - The LN Series is a packaged version of the world�s most successful reciprocating air compressor. Simple design and convenient access allows ease of maintenance * RELIABILITY - The LN Series features rugged design with efficient cooling and low speed compressor pump unit providing reliability and durability * EASE OF INSTALLATION - The LN Series provides a silent, easily manoeuvred and convenient air compressor that can be installed easily in any suitable location * SAFETY - All components are enclosed within the attractive cabinet, this along with the standard safety features provide optimum operator protection. Capacity 30 cfm 840 lt/min Pressure 11 bar 160 psi Motor 7.5 HP 5.5 kW Receiver 500 litre Voltage: 400v Silenced Belt Drive

ABAC Silenced Belt Drive Compressor - B7000/LN/10/500 in Silenced Belt Drive Compressors Section

* Belt driven * Low noise with attractive acoustically designed cabinet * Fitted with genuine high quality ABAC automotive compressor pump unit * Slow running compressor for long life and quieter operation * Superior cooling for high efficiency and improved output * High quality heavy duty electric motor with full overload protection * Fully automatic control * Comprehensive 12 month warranty with nation wide back up * LOW NOISE - The LN Series machine features very low operating noise levels 64-68dB(A), they can therefore be sited in the most convenient location even in the vicinity of personnel * LOW MAINTENANCE - The LN Series is a packaged version of the world�s most successful reciprocating air compressor. Simple design and convenient access allows ease of maintenance * RELIABILITY - The LN Series features rugged design with efficient cooling and low speed compressor pump unit providing reliability and durability * EASE OF INSTALLATION - The LN Series provides a silent, easily manoeuvred and convenient air compressor that can be installed easily in any suitable location * SAFETY - All components are enclosed within the attractive cabinet, this along with the standard safety features provide optimum operator protection. Capacity 41 cfm 1150 lt/min Pressure 11 bar 160 psi Motor 7.5 HP 5.5 kW Receiver 500 litre Voltage: 400v Silenced Belt Drive

Air Flow Coupling 1/4 Female in Standard fitting range Section

The original quick release Vertex coupling with over 50 years of design enhancements. Affectionately know as the PCL Standard Coupling or PCL's. Designed and manufactured in Sheffield by PCL, these quick release couplings have a double action feature which makes them ideal for trailing hose applications in garage workshops and tyreshop environments (e.g. portable air tools and PCL hand held tyre inflation equipment) Incorporates all the features of the AIRFLOW coupling Steel construction with corrosive resistant finish � robust and hardwearing Protective shoulder prevents dirt penetration and accidental disconnection Twin version available

Air Flow Coupling 1/4" male thread in Standard fitting range Section

Air Grease Gun in Workshop Tools Section

Pistol-type, continuous flow version suitable for agricultural, automotive and industrial applications. 360° adjustable handle allows access to awkward locations. Accepts bulk or standard 400g grease cartridges. Supplied complete with rigid delivery tube. Display carton. Specification:
Operating air pressure   ...   30-110psi (2.1-7.6bar)
Capacity   ...   400cc
Outlet pressure   ...   2400-4500psi (166-414bar)
Air inlet   ...   1/4" BSP
Minimum hose size   ...   1/4" I.D
Weight   ...   1.5kg

Air Grease Gun in Draper Section

Air Impact Wrench - 1" in Air Wrenches Section

Air Impact Wrench - 1" with pvc case

Air Tool Oil in Air Wrenches Section

Quality lubricating oil for daily use to maintain high performance from air tools and compressors. Use daily for optimum results.

Air Tool Oil in New Products Section

Quality lubricating oil for daily use to maintain high performance from air tools and compressors. Use daily for optimum results.

Air Tool Oil in Inflation Gauges Section

Quality lubricating oil for daily use to maintain high performance from air tools and compressors. Use daily for optimum results.

Alloy Wheel Protection Rings (Full Set) 15"-20" in Alloy Wheel Protector Rings Section

Metal ring protector set for all passenger car wheels. These rings protect alloy wheels during the mount and demount process. The set includes 6 rings from 15" to 20". Simply fit the ring over wheel prior to removal or fitment of the tyre to ensure no damage to the alloy wheel!

Alloy Wheel Protection Rings (Full Set) 15"-20" in Hand Tools and Accessories Section

Alloy Wheel Protection Rings (Full Set) 15"-20" in Alloy Wheel Protector Rings Section

Alloy Wheel Protection Rings (Full Set) 15"-20" in New Products Section

Alloy Wheel Protector in Tyre Fitting Tools Section

Alloy Wheel Protector. Clip on to avoid alloy wheel damage during the mount/demount process.

Automatic Tyre Changer - 24"- Unite U221 in Garage Equipment Section

24� Fully Automatic Tyre changer with pneumatically controlled tilt arm design and fully automated pneumatic locking system for mounting head setting. The turntable has a clamping capacity of up to 24� internal clamping capacity, and 21� External capacity. This Fully Automatic 24� Tyre Changer is capable of handling rim and tyre combinations up to 14� in width giving you a complete scope of operation. As with all Unite machines, the full alloy wheel protection kit is included in the price of the machine. Built with the same robust material as the other machines in the Unite range this tyre changer will allow the user to mount and demount tyres from the majority of both passenger vehicles and light commercial vehicles such as transit vans with speed using the advanced pneumatically controlled locking system.� Unite U221

Automatic Tyre Changer - 24"- Unite U221 in Unite Tyre Changers Section

Automatic Tyre Changer - 24"- Unite U221 in Tyre Changers & Balancers Section

Automatic Tyre Changer with assist arm 24" - Unite U226 in Garage Equipment Section

This Fully Automatic 24� Tyre Changer is capable of handling large rim and tyre combinations giving you a complete scope of operation including run flats and low profile tyres. Additionally, this 24� Fully Automatic Tyre Changer comes fitted with a 3 function assist arm for helping with low profile and run flat tyres. The bead roller sits around 6 inches away from the mounting head to hold the side wall down and allow easier access with your tyre lever on the mounting head. Additionally, the rotating clamp will keep the side wall in position as the turntable rotates ensuring the bead doesn�t slip back on to the rim. Unite U226

Automatic Tyre Changer with assist arm 24" - Unite U226 in Unite Tyre Changers Section

Automatic Tyre Changer with assist arm 24" - Unite U226 in Tyre Changers & Balancers Section

Bag of mixed 414PSI valves in 414 PSI valves Section

Bag of mixed 418PSI valves in 418 PSI valves Section

Bead Buster in Bead Breakers Section

Portable Bead Breaker, simple action can be operated by hand or ratchet wrench, suitable for car, Truck, Tractor and agricultural implements. The bead buster has a maximum breaking force of 10 tons.

Bead Depressing Tool (3rd Hand) in Tyre Fitting Tools Section

Holds bead down towards rim to help with fitting of awkward low-profile or runflat tyres.

Bead Sealer w/Brush 1 litre can in Tyre Repair Chemicals Section

Litre can with brush in lid. Use to ensure an airtight seal between tyres and corroded steel wheels.

Bead Sealer w/Brush 1 litre can in Homepage Section

Litre can with brush in lid. Use to ensure an airtight seal between tyres and corroded steel wheels.

Bead Wedge in Tyre Fitting Tools Section

Bench Top Tyre Spreader in Tyre Repair Tools & Accesories Section

Bent Nose Pliers - 4.5" in Workshop Tools Section

Black (Qty 100) in Plastic/Chrome dust caps Section

Black Plastic Cap

Black Jack 100mm Cross Ply Patch 2ply in Black Jack Cross Ply Repair Patches Section

Black Jack 100mm Cross Ply Patch 2ply

Black Jack 105mm Large Radial Patch (100) in Black Jack Radial Repair Patches Section

Black Jack 105mm Large Radial Patch (100)

Black Jack 105mm Large Radial Patch (20) in Black Jack Radial Repair Patches Section

Black Jack 105mm Large Radial Patch (20)

Black Jack 120mm Cross Ply Patch 4ply in Black Jack Cross Ply Repair Patches Section

Black Jack 120mm Cross Ply Patch 4ply

Black Jack 145mm Cross Ply Patch 4ply in Black Jack Cross Ply Repair Patches Section

Black Jack 145mm Cross Ply Patch 4ply

Black Jack 180mm Cross Ply Patch 4ply in Black Jack Cross Ply Repair Patches Section

Black Jack 180mm Cross Ply Patch 4ply

Black Jack 25mm Ticket Patch (Black Gum) in Black Jack Refillables Section

Black Jack 1" (25mm) Round Bias Patch - Individual

Black Jack 25mm Ticket Patch (Black Gum) in Black Jack Tube Repair Patches Section

Black Jack 1" (25mm) Round Bias Patch - Individual

Black Jack 25mm Ticket Patch (Black Gum) pack of 100 in Black Jack Tube Repair Patches Section

Black Jack 25mm Ticket Patch (Black Gum) pack of 100

Black Jack 25mm Ticket Patch (Black Gum) pack of 50 in Homepage Section

Black Jack 25mm Ticket Patch (Black Gum) pack of 50

Black Jack 25mm Ticket Patch (Black Gum) pack of 50 in Black Jack Tube Repair Patches Section

Black Jack 25mm Ticket Patch (Black Gum) pack of 50

Black Jack 265mm Cross Ply Patch 6ply in Black Jack Cross Ply Repair Patches Section

Black Jack 265mm Cross Ply Patch 6ply

Black Jack 35mm Round All Purpose Patch in Black Jack Refillables Section

1 3/8" (35mm) Round All Pupose Patch - Individual

Black Jack 35mm Round All Purpose Patch in Black Jack Universal Tyre Repair Patches Section

1 3/8" (35mm) Round All Pupose Patch - Individual

Black Jack 35mm Round All Purpose Patch (100) in Black Jack Universal Tyre Repair Patches Section

Black Jack 35mm Round All Purpose Patch (100)

Black Jack 35mm Round All Purpose Patch (20) in Black Jack Universal Tyre Repair Patches Section

Black Jack 35mm Round All Purpose Patch (20)

Black Jack 35mm Round All Purpose Patch (20) in Homepage Section

Black Jack 35mm Round All Purpose Patch (20)

Black Jack 35mm Tube Patch (Black Gum) in Black Jack Refillables Section

Black Jack 1 3/8" (35mm) Round Bias Patch Individual

Black Jack 35mm Tube Patch (Black Gum) in Black Jack Tube Repair Patches Section

Black Jack 1 3/8" (35mm) Round Bias Patch Individual

Black Jack 35mm Tube Patch (Black Gum) pack of 100 in Black Jack Tube Repair Patches Section

Black Jack 35mm Tube Patch (Black Gum) pack of 100

Black Jack 35mm Tube Patch (Black Gum) pack of 30 in Black Jack Tube Repair Patches Section

Black Jack 35mm Tube Patch (Black Gum) pack of 30

Black Jack 45mm Round All Purpose Patch in Black Jack Refillables Section

1 3/4" (45mm) Square All Purpose Patch - Individual

Black Jack 45mm Round All Purpose Patch in Black Jack Universal Tyre Repair Patches Section

1 3/4" (45mm) Square All Purpose Patch - Individual

Black Jack 45mm Round All Purpose Patch (100) in Black Jack Universal Tyre Repair Patches Section

Black Jack 45mm Round All Purpose Patch (100)

Black Jack 45mm Round All Purpose Patch (20) in Black Jack Universal Tyre Repair Patches Section

Black Jack 45mm Round All Purpose Patch (20)

Black Jack 45mm Round Radial Patch in Black Jack Refillables Section

Black Jack 1 3/4" (45mm) Round Radial Patch - Individual

Black Jack 45mm Round Radial Patch in Black Jack Radial Repair Patches Section

Black Jack 1 3/4" (45mm) Round Radial Patch - Individual

Black Jack 45mm Round Radial Patch (100) in Black Jack Radial Repair Patches Section

Black Jack 45mm Round Radial Patch (100)

Black Jack 45mm Round Radial Patch (20) in Homepage Section

Black Jack 45mm Round Radial Patch (20)

Black Jack 45mm Round Radial Patch (20) in Black Jack Radial Repair Patches Section

Black Jack 45mm Round Radial Patch (20)

Black Jack 45mm Tube Patch (Black Gum) in Black Jack Refillables Section

Black Jack 1 5/8" (45mm) Round Bias Patch Individual

Black Jack 45mm Tube Patch (Black Gum) in Black Jack Tube Repair Patches Section

Black Jack 1 5/8" (45mm) Round Bias Patch Individual

Black Jack 45mm Tube Patch (Black Gum) pack of 100 in Black Jack Tube Repair Patches Section

Black Jack 45mm Tube Patch (Black Gum) pack of 100

Black Jack 45mm Tube Patch (Black Gum) pack of 30 in Black Jack Tube Repair Patches Section

Black Jack 45mm Tube Patch (Black Gum) pack of 30

Black Jack 55mm Tube Patch (Black Gum) in Black Jack Refillables Section

Black Jack 2 1/4" (55mm) Round Bias Patch Individual

Black Jack 55mm Tube Patch (Black Gum) in Black Jack Tube Repair Patches Section

Black Jack 2 1/4" (55mm) Round Bias Patch Individual

Black Jack 55mm Tube Patch (Black Gum) pack of 100 in Black Jack Tube Repair Patches Section

Black Jack 55mm Tube Patch (Black Gum) pack of 100

Black Jack 55mm Tube Patch (Black Gum) pack of 30 in Black Jack Tube Repair Patches Section

Black Jack 55mm Tube Patch (Black Gum) pack of 30

Black Jack 60mm Round All Purpose Patch in Black Jack Refillables Section

2 3/8" (60mm) all purpose Round Patch - Individual

Black Jack 60mm Round All Purpose Patch in Black Jack Universal Tyre Repair Patches Section

2 3/8" (60mm) all purpose Round Patch - Individual

Black Jack 60mm Round All Purpose Patch (100) in Black Jack Universal Tyre Repair Patches Section

Black Jack 60mm Round All Purpose Patch (100)

Black Jack 60mm Round All Purpose Patch (20) in Black Jack Universal Tyre Repair Patches Section

Black Jack 60mm Round All Purpose Patch (20)

Black Jack 80mm Round Radial Patch in Black Jack Refillables Section

Black Jack 3 1/8" (80mm) Round Radial Patch Individual

Black Jack 80mm Round Radial Patch in Black Jack Radial Repair Patches Section

Black Jack 3 1/8" (80mm) Round Radial Patch Individual

Black Jack 80mm Round Radial Patch (100) in Black Jack Radial Repair Patches Section

Black Jack 80mm Round Radial Patch (100)

Black Jack 80mm Round Radial Patch (20) in Black Jack Radial Repair Patches Section

Black Jack 80mm Round Radial Patch (20)

Black Jack 80mm Tube Patch (Black Gum) in Black Jack Refillables Section

Black Jack 3 1/8" (80mm) Round Bias Patch Individual

Black Jack 80mm Tube Patch (Black Gum) in Black Jack Tube Repair Patches Section

Black Jack 3 1/8" (80mm) Round Bias Patch Individual

Black Jack 80mm Tube Patch (Black Gum) pack of 100 in Black Jack Tube Repair Patches Section

Black Jack 80mm Tube Patch (Black Gum) pack of 100

Black Jack 80mm Tube Patch (Black Gum) pack of 30 in Black Jack Tube Repair Patches Section

Black Jack 80mm Tube Patch (Black Gum) pack of 30

Black Scuffs - Set of 4 in Scuffs - Alloy Wheel Protection Section

Scuffs are universal fitting alloy wheel rim protectors manufactured from a length of tough, flexible and shock absorbent material and have undergone full digital stress and performance testing. The unique registered design (patent pending) absorbs slow speed kerb impact protecting the outside edge of your rims, the bit that really matters and look unsightly when damaged. Rimblades can be used to prevent damage from occurring to new wheels or to cover up existing damage making older damaged wheels look new again. With a RRP to your customer of �39.99 these products offer you a great return. Fitting Guide 1. Clean and Prepare the rim as if you were applying adhesive weights. Preparation of the wheels surface is very important and should not be overlooked. 2. Using an IPA Soloution (available seperatley), thoroughly clean wheel rims, then go over area where the Scuffs will fit using the primer (Sold Seperatley). 3. Removing the tape backing as you go, fit the Scuffs to the wheels ensuring carefully they are applied evenly around the wheels edge. 4. Carefully mark and cut the Scuffs squarely where the ends meet and join using the glue provided. 5. Push down firmly all the way round the wheels with firm equal pressure as the tape is pressure activated.

Black Self Adhesive Weight Strips (Box 50) - Black in Self Adhesive Weights Section

High quality self adhesive weight strips with a black finish. Each strip weighs 60g and is divided into 5g sections - perfect to conceal the weights on black wheels. Application of Adhesive weights 1 � Preparation work Rotate the tyre and determine the wheel imbalance in both planes. Ideally the weight, rim and ambient temperature should be around 15 degrees centigrade as this enables the adhesive backing to perform at its best. Clean the rims with an appropriate cleaning agent to avoid grease and silicone residues on the rim. 2 � Removing the protective backing Having identified the weight position to the rim, peel off the protective backing without touching the adhesive. 3 � Assembling the weight Now press the weight to the rim from the middle towards the outer edges. The pressure should be applied for at least 20 seconds. After assembly 80%-90% of the final adhesive force is achieved after approx 24hrs. Full adhesive force is achieved after 72 hrs.

Black Tyre Mounting Paste 5Kg in Tyre Fitting Chemicals Section

Black Tyre Mounting Paste 5Kg This product helps to eliminate Rim slippage, reduces bead damage and does not freeze or harden.

Black-Seal Black 8" Repair String (Pack of 50) in Repair String Section

Black-Seal Black 8" Repair String (Pack of 50)

Blue (Qty 100) in Plastic/Chrome dust caps Section

Blue Plastic Cap

Blue Nitrile Gloves (Box 100) - Extra Large in Blue Nitrile Gloves Section

Unlike latex gloves, the Nitrile material that these gloves are made from is 3 times less likely to catch and tear but still offers the same sensitivity making them ideal for all situations. As well as this, the Nitrile material is resistant to chemicals providing a greater level of protection. There's no problem in getting a full day's wear from these gloves and, the blue material is just that bit more stylish than the old white latex! (Supplied in boxes of 100)

Blue Nitrile Gloves (Box 100) - Extra Large in Workshop Tools Section

Blue Nitrile Gloves (Box 100) - Extra Large in NEW! Blue Nitrile Gloves Section

Blue Nitrile Gloves (Box 100) - Large in NEW! Blue Nitrile Gloves Section

Blue Nitrile Gloves (Box 100) - Large in Blue Nitrile Gloves Section

Blue Nitrile Gloves (Box 100) - Large in Workshop Tools Section

Blue Nitrile Gloves (Box 100) - Medium in NEW! Blue Nitrile Gloves Section

Blue Nitrile Gloves (Box 100) - Medium in Blue Nitrile Gloves Section

Blue Nitrile Gloves (Box 100) - Medium in Workshop Tools Section

BlueScuffs - Set of 4 in Scuffs - Alloy Wheel Protection Section

Boost Air - For Seating Tyres - Bead Blasting in Tyre Fitting Tools Section

The Bead Booster / Blaster, sometimes referred to as a Cheetah has turned one of the most frustrating and time consuming jobs in the tyre shop into one of the quickest and easiest. It seats the beads of difficult tubeless tyres instantly by directing a rush of air into the gap between the tyre and rim, lifting the bead to give a contact seal which allows the tyre to inflate. Easy to use on car, truck, bus, agricultural and ATV tyres. Perfect for service vehicle and workshop use. It will save you time and money. The Unite Bead Blaster is made in the UK and is supplied with full CE certification.

Boost Air - For Seating Tyres - Bead Blasting in Homepage Section

Bottle Jack 6 ton in Range of Jacks Section

Heavy duty, powder coated bottle jack

Brown thick 8" Repair String (Qty 30) in Repair String Section

Eight inch thick repair string to repair punctured commecial vehicle tyres.

Brush in Tyre Fitting Tools Section

Plastic Handled Mounting Brush. Used with Tyre mounting paste to eliminate rim slippage and to reduce bead damage.

Budget 24 Pack of Tyres in Section

This pack includes 24 tyres in the most popular sizes from across a range of budget brands which can include marques such as Enduro, Fullrun, Kenda and GT.

Buffing Solution in Black Jack Repair Chemicals and Compounds Section

Buffing solution to clean and buff before carrying out repair work.

Buffing Solution in Tyre Repair Chemicals Section

Buffing solution to clean and buff before carrying out repair work.

Buffing Solution 800ml can in Section

Camber rite Digital Gauge in Wheel Alignment Section

The Camber rite digital gauge is easy to use with large, clear read out. Accurate to 0.1 degrees (6 minutes) at 90 degrees the gauge can be used either measuring directly off the tyre side wall or, when using the contact fingers, on the wheel rims up to 20". The gauge is easily calibrated and has an �alternate zero� facility for when not working on a level surface.

Charts Double Value Pack in Special Offers Section

This pack contains: Front wheel tracking chart 1996-2012 which lists checking and setting data in mm and degrees. AND Tyre pressures/wheel nut torques chart 1997-2012

Charts Double Value Pack in Homepage Section

This pack contains: Front wheel tracking chart 1996-2012 which lists checking and setting data in mm and degrees. AND Tyre pressures/wheel nut torques chart 1997-2012

Charts Double Value Pack in Charts Section

This pack contains: Front wheel tracking chart 1996-2012 which lists checking and setting data in mm and degrees. AND Tyre pressures/wheel nut torques chart 1997-2012

Chrome Valve Caps (Qty 100) in Plastic/Chrome dust caps Section

Chrome valve caps

Chrome Valve Caps (Qty 100) in Chrome Valves Section

Chrome valve caps

Coarse Grit Buffing Stone 2 1/2'' in Tyre Repair Tools & Accesories Section

Commercial Wheel Balancer for Truck and Bus in Unite Wheel Balancers Section

Commercial Wheel Balancer for Truck and Bus featuring various balancing modes and a pnematic tyre lifting device. With manual input of offset and wheel diameter the wheel balancer is ideal for Truck and Bus applications.

Commercial Wheel Balancer for Truck and Bus in Commercial Tyre Machinery Section

Commercial Wheel Balancer for Truck and Bus in Unite Tyre Changers Section

Concentrated Leak Detector in Black Jack Repair Chemicals and Compounds Section

Concentrated Leak Detector

Concentrated Leak Detector in Tyre Repair Chemicals Section

Concentrated Leak Detector

Coned tailpiece 4.75mm in Air Hose and Connectors Section

Coned tailpiece 4.75mm(3/16") bore hose for Rp 1/4 union nut

Creader Diagnostic tool in Workshop Tools Section

Handy pocket size universal diagnostic tool. It will read and clear engine management trouble codes on the majority of UK, European and Japanese vehicles. It comes complete with a code reader manual. This is a must have product for fast and thorough engine diagnostics.

Custom TPMS in Section

Cut Off Tool in Drills, Ratchets, hammers and cut off tools Section

Cut Off Tool complete with 3" blade Speed 20,000 rpm Ave Air Con: 4.6cfm / 130 l/min Weight 1kgs / 2.2lbs Vibration Level 2.2 m/s� Sound Pressure 98dBA Size: 75mm Cutting Disc Length: 7.5" / 190mm

Cut Off Tool in PCL - Pneumatic Components Ltd Section

Cut Off Tool complete with 3" blade Speed 20,000 rpm Ave Air Con: 4.6cfm / 130 l/min Weight 1kgs / 2.2lbs Vibration Level 2.2 m/s� Sound Pressure 98dBA Size: 75mm Cutting Disc Length: 7.5" / 190mm

Deep Impact Socket 1/2" Drive - 10mm in Sockets - Singular Deep Impact - 8mm to 27mm Section

Deep Impact Socket 1/2" Drive - 11mm in Sockets - Singular Deep Impact - 8mm to 27mm Section

Deep Impact Socket 1/2" Drive - 12mm in Sockets - Singular Deep Impact - 8mm to 27mm Section

Deep Impact Socket 1/2" Drive - 13mm in Sockets - Singular Deep Impact - 8mm to 27mm Section

Deep Impact Socket 1/2" Drive - 14mm in Sockets - Singular Deep Impact - 8mm to 27mm Section

Deep Impact Socket 1/2" Drive - 15mm in Sockets - Singular Deep Impact - 8mm to 27mm Section

Deep Impact Socket 1/2" Drive - 16mm in Sockets - Singular Deep Impact - 8mm to 27mm Section

Deep Impact Socket 1/2" Drive - 17mm in Sockets - Singular Deep Impact - 8mm to 27mm Section

Deep Impact Socket 1/2" Drive - 18mm in Sockets - Singular Deep Impact - 8mm to 27mm Section

Deep Impact Socket 1/2" Drive - 19mm in Sockets - Singular Deep Impact - 8mm to 27mm Section

Deep Impact Socket 1/2" Drive - 20mm in Sockets - Singular Deep Impact - 8mm to 27mm Section

Deep Impact Socket 1/2" Drive - 21mm in Sockets - Singular Deep Impact - 8mm to 27mm Section

Deep Impact Socket 1/2" Drive - 22mm in Sockets - Singular Deep Impact - 8mm to 27mm Section

Deep Impact Socket 1/2" Drive - 23mm in Sockets - Singular Deep Impact - 8mm to 27mm Section

Deep Impact Socket 1/2" Drive - 24mm in Sockets - Singular Deep Impact - 8mm to 27mm Section

Deep Impact Socket 1/2" Drive - 25mm in Sockets - Singular Deep Impact - 8mm to 27mm Section

Deep Impact Socket 1/2" Drive - 26mm in Sockets - Singular Deep Impact - 8mm to 27mm Section

Deep Impact Socket 1/2" Drive - 27mm in Sockets - Singular Deep Impact - 8mm to 27mm Section

Deep Impact Socket 1/2" Drive - 28mm in Sockets - Singular Deep Impact - 28mm to 46mm Section

Deep Impact Socket 1/2" Drive - 29mm in Sockets - Singular Deep Impact - 28mm to 46mm Section

Deep Impact Socket 1/2" Drive - 30mm in Sockets - Singular Deep Impact - 28mm to 46mm Section

Deep Impact Socket 1/2" Drive - 32mm in Sockets - Singular Deep Impact - 28mm to 46mm Section

Deep Impact Socket 1/2" Drive - 33mm in Sockets - Singular Deep Impact - 28mm to 46mm Section

Deep Impact Socket 1/2" Drive - 35mm in Sockets - Singular Deep Impact - 28mm to 46mm Section

Deep Impact Socket 1/2" Drive - 36mm in Sockets - Singular Deep Impact - 28mm to 46mm Section

Deep Impact Socket 1/2" Drive - 37mm in Sockets - Singular Deep Impact - 28mm to 46mm Section

Deep Impact Socket 1/2" Drive - 38mm in Sockets - Singular Deep Impact - 28mm to 46mm Section

Deep Impact Socket 1/2" Drive - 41mm in Sockets - Singular Deep Impact - 28mm to 46mm Section

Deep Impact Socket 1/2" Drive - 46mm in Sockets - Singular Deep Impact - 28mm to 46mm Section

Deep Impact Socket 1/2" Drive - 8mm in Sockets - Singular Deep Impact - 8mm to 27mm Section

Deep Impact Socket 1/2" Drive - 9mm in Sockets - Singular Deep Impact - 8mm to 27mm Section

Dispenser for Adhesive 2.6kg Weights in Self Adhesive Weights Section

When purchasing our adhesive weight reels why not purchase this easily mounted dispenser. Designed for easy storage and ensures less wastage.

Disposable car seat covers (Quantity 100 per roll) in Car Protection Section

Large opaque and durable protective car seat covers with 100 covers per dispensing roll. Suitable for all cars and light commercials.

Disposable White Paper Floor Mats (Quantity 200) in Car Protection Section

200 plain white, durable and convenient paper floor mats per pack.

Double ended hose connector 12.7mm in Air Hose and Connectors Section

Double ended hose connector R3/8 for 12.7mm (1/2") bore hose

Double ended hose connector 6.35mm (1/4") bore hose in Air Hose and Connectors Section

Double ended hose connector 6.35mm (1/4") bore hose

Double ended hose connector 7.9mm in Air Hose and Connectors Section

Double ended hose connector 7.9mm (5/16") bore hose

Double ended hose connector 9.5mm in Air Hose and Connectors Section

Double ended hose connector 9.5mm (3/8") bore hose

Double Handled Bead Knocker in Bead Breakers Section

Bead breaker with heavy duty, strengthened construction for a longer life. Overall length Closed: 37� Open: 61�

Draper 1.5 Tonne Low Profile Aluminium Trolley Jack with Quick Lift Facility in Jacks Section

Low profile trolley jack with 'quick lift' giving extra lift per stroke of the jack handle thereby requiring less effort to achieve the required height. 50mm high front roller particularly suitable for low chassis or reduced clearance vehicles. Fitted with 45mm diameter rear swivelling castor wheels and large cushioned saddle to aid positioning under the vehicle. Handle twists for rapid lowering. Manufactured from 10mm thick anodized aluminium ensuring maximum body strength. Supplied complete with two piece handle. Display carton.
Specification: Capacity ... 1.5 tonnes (1500kg) Lifting range ... 85 - 445mm Overall size ... 620 x 270 x 230mm Weight ... 23kg

Draper 1.5 Tonne Low Profile Aluminium Trolley Jack with Quick Lift Facility in Draper Section

Draper 3 Tonne Heavy Duty Garage Trolley Jack in Jacks Section

Heavy duty design with integral American-style release mechanism and two-piece handle. Fitted with heavy duty rear swivelling castor wheels and large saddle to aid positioning under the vehicle. The jack incorporates a safety overload and bypass valves to prevent the handle locking at the maximum ram extension. Display carton.
Specification: Capacity ... 3 tonnes (3000kg) Lifting range ... 145 - 520mm Overall size ... 660 x 350 x 160mm

Draper 3 Tonne Heavy Duty Garage Trolley Jack in Draper Section

Draper 3 Tonne Heavy Duty Garage Trolley Jack with Quick Lift facility in Jacks Section

Heavy duty design with integral American-style release mechanism and two-piece handle. Incorporates 'Quick Lift' pedal which when depressed brings the saddle into contact with the jacking point without the need to pump the handle. Fitted with heavy duty rear swivelling castor wheels and large saddle to aid positioning under the vehicle. The jack incorporates a safety overload and bypass valves to prevent the handle locking at the maximum ram extension. Display carton.
Specification: Capacity ... 3 tonnes (3000kg) Lifting range ... 145 - 490mm Overall size ... 640 x 350 x 180mm Weight ... 39.5kg

Draper 3 Tonne Heavy Duty Garage Trolley Jack with Quick Lift facility in Draper Section

DRAPER EXPERT 160MM VDE LONG NOSE PLIERS in Workshop Tools Section

Expert Quality, drop forged from chrome vanadium steel correctly hardened and tempered with additionally induction hardened cutting edges. Each plier has been tested to 10,000V for safe 1000V AC or 1500V DC live line working. Lacquered finish for corrosion protection with heavy duty, fully insulated, soft grip handles with slip guards. Display packed.

DRAPER EXPERT 160MM VDE LONG NOSE PLIERS in Draper Section

DRAPER EXPERT 4 PIECE LOCKING WHEEL NUT SET in Draper Section

Expert Quality, for the installation and removal of locking wheel nuts on most vehicles (except those fitted with rotating protector shrouds). Manufactured from molybdenum steel, hardened, tempered and chemically blacked for corrosion protection. Reduce tapered internal left hand coarse thread. For use with air and electric tools. Packed in metal display case.

Contents: 38mm long x 17.0, 18.5, 21.5 and 26.0mm (open end)

DRAPER EXPERT 4 PIECE LOCKING WHEEL NUT SET in General Accessories Section

DRAPER EXPERT 4 PIECE LOCKING WHEEL NUT SET in Tyre Fitting Tools Section

DRAPER EXPERT 90L GRAVITY FEED OIL DRAINER in Draper Section

Expert Quality, gravity feed waste oil drainers with 2M x 25.4mm discharge hose. Discharge is by air pressure. Fitted with safety valve, 18L steel telescopic collection pan, oil reservoir level indicator and small working tray. Heavy duty castors for easy manoeuvrability around the workshop with chrome plated pull-along handle. Carton packed.

DRAPER EXPERT 90L GRAVITY FEED OIL DRAINER in Tyre Repair Tools & Accesories Section

DRAPER EXPERT 90L GRAVITY FEED OIL DRAINER in General Accessories Section

DRAPER EXPERT 90L GRAVITY FEED OIL DRAINER in Tyre Fitting Tools Section

DRAPER EXPERT 90L GRAVITY FEED OIL DRAINER in Workshop Tools Section

DRAPER EXPERT HI-TORQ WHEEL NUT SOCKETS FOR ALUMINIUM WHEELS in Draper Section

Expert Quality, set of three 6 point Draper Expert HI-TORQ sockets sizes 17, 19 and 21mm. Manufactured from chrome molybdenum steel hardened and tempered. Sleeved with nylon internally and externally to prevent damage to wheels and nuts. Supplied in handy blow mould case with display sleeve.

DRAPER EXPERT HI-TORQ WHEEL NUT SOCKETS FOR ALUMINIUM WHEELS in Socket Sets Section

Dusting Chalk in Tyre Repair Chemicals Section

E600R High Pressure Snap In Valve 11.5mm in Specialist Valves Section

These High pressure Snap-in-valves are suited for applications such as transit wheels.

Emergency Tow Strap in Draper Section

Tow Strap with 2 hooks 7500LB/3400KG 2" x 16"

Essentials Pack in Balance Weights Section

Basics pack TR414 38mm length, 11.5mm rim hole - Qty 200 TR418 49mm length, 11.5mm rim hole - Qty 100 TBDA04 60 grams per strip in 5g sections - Qty 100 TBD019 Plastic Handled Valve Key - Qty 1 TBD085 Self adhesive weight remover - Qty 1

Essentials Pack in Special Offers Section

Essentials Pack in Self Adhesive Weights Section

Essentials Starter Pack in Special Offers Section

This pack of balance weights, valves, repair materials, chemicals, hand tools and pastes comes from our quality consumable range. TR414 38mm Tubeless Tyre Valves x 100 TR418 45mm Tubeless Tyre Valves x 100 TBDW10 Zinc Weight For Steel Wheels - 10g x100 TBDW15 Zinc Weight For Steel Wheels - 15g x100 TBDW20 Zinc Weight For Steel Wheels - 20g x100 TBDW25 Zinc Weight For Steel Wheels - 25g x100 TBDC10 Zinc Coated Weight For Alloy Wheels - 10g x100 TBDC15 Zinc Coated Weight For Alloy Wheels - 15g x100 TBDC20 Zinc Coated Weight For Alloy Wheels - 20g x100 TBDC25 Zinc Coated Weight For Alloy Wheels - 25g x100 TBDA04 Self Adhesive Weight Strip, 5g Sections Box of 50 TBDTR01-1 40 mm Repair Patches TBDTRB34 Fast Dry Cement Solution (250 ml) TBDTRB38 Bead Sealer 1 Litre Can TBDTR09 Buffing Solution 1 Litre Can TBDTR06A Valve Knife Tapered Blade TBD001 Paste Brush TBD002A Paste 5kg TBD005 Valve Mounter (PVC) TBD006A Tyre Marking Crayon White TBD019 Plastic Handled Valve Core Key TBDTR11 Stitch Roller TBDTR17A Spiral Cement Tool TBDTR18 Insert Tool TBDTR35 Rubber Scraper TBD08DM-B Medium Thick Nitrile Industrial Grade Gloves TBDTRB31 Patch Plug Combo 6mm Stem

Essentials Starter Pack with Tools in Special Offers Section

This pack of balance weights, valves, repair materials, chemicals, hand tools and pastes comes from our quality consumable range. Also included are a 3 ton trolley jack, a bench top tyre spreader and a 1/2" Air Impact Wrench Kit - all the tools you need to get going with your new tyre machines! TR414 38mm Tubeless Tyre Valves x 100 TR418 45mm Tubeless Tyre Valves x 100 TBDW10 Zinc Weight For Steel Wheels - 10g x100 TBDW15 Zinc Weight For Steel Wheels - 15g x100 TBDW20 Zinc Weight For Steel Wheels - 20g x100 TBDW25 Zinc Weight For Steel Wheels - 25g x100 TBDC10 Zinc Coated Weight For Alloy Wheels - 10g x100 TBDC15 Zinc Coated Weight For Alloy Wheels - 15g x100 TBDC20 Zinc Coated Weight For Alloy Wheels - 20g x100 TBDC25 Zinc Coated Weight For Alloy Wheels - 25g x100 TBDA04 Self Adhesive Weight Strip, 5g Sections Box of 50 TBDTR01-1 40 mm Repair Patches TBDTRB34 Fast Dry Cement Solution (250 ml) TBDTRB38 Bead Sealer 1 Litre Can TBDTR09 Buffing Solution 1 Litre Can TBDTR06A Valve Knife Tapered Blade TBD001 Paste Brush TBD002A Paste 5kg TBD005 Valve Mounter (PVC) TBD006A Tyre Marking Crayon White TBD019 Plastic Handled Valve Core Key TBDTR11 Stitch Roller TBDTR17A Spiral Cement Tool TBDTR18 Insert Tool TBDTR35 Rubber Scraper TBD08DM-B Medium Thick Nitrile Industrial Grade Gloves TBDTRB31 Patch Plug Combo 6mm Stem TBD4201AK - Air Impact Wrench Kit TBDSD3000CXD - 3 Ton Trolley Jack TBD077-3 - Bench Top Tyre Spreader

Extra Value Pack of Hand tools in Hand Tools and Accessories Section

Special web offer: Save over �21 by choosing this pack rather than buying the tools seperately! 1 x Hand Rasp 1 x Spiral Cement Tool 1 x Stitch Roller 1 x Valve Knife Tapered Blade 1 x Valve Knife - Hooked Blade 1 x Universal Weight Pliers 1 x Self Adhesive Weight Remover 1 x Tyre Valve Tool Silver 1 x Tyre Prodder 1 x Rubber Scraper 1 x Insert Tool 1 x Shoe Handled Wire Brush

Extra Value Pack of Hand tools in Special Offers Section

Extra Value Weight Pack in Balance Weights Section

1 box each 5g - 30g For Steel Wheels 1 box each 5g - 30g For Alloy Wheels 2 boxes of 60g Self Adhesive Weights Normal price for separate purchases: �171.95 saving nearly 25%

Extra Value Weight Pack in Special Offers Section

1 box each 5g - 30g For Steel Wheels 1 box each 5g - 30g For Alloy Wheels 2 boxes of 60g Self Adhesive Weights Normal price for separate purchases: �171.95 saving nearly 25%

Extra Value Weight Pack in Lead Free Weights for Alloy Wheels Section

1 box each 5g - 30g For Steel Wheels 1 box each 5g - 30g For Alloy Wheels 2 boxes of 60g Self Adhesive Weights Normal price for separate purchases: �171.95 saving nearly 25%

Extra Value Weight Pack in Lead Free weights for Steel Wheels Section

1 box each 5g - 30g For Steel Wheels 1 box each 5g - 30g For Alloy Wheels 2 boxes of 60g Self Adhesive Weights Normal price for separate purchases: �171.95 saving nearly 25%

Extra Value Weight Pack in Self Adhesive Weights Section

1 box each 5g - 30g For Steel Wheels 1 box each 5g - 30g For Alloy Wheels 2 boxes of 60g Self Adhesive Weights Normal price for separate purchases: �171.95 saving nearly 25%

Fast Dry Cement 250ml Can in Black Jack Repair Chemicals and Compounds Section

Fast dry cement with brush included. Suitable for fixing patches, plugs and string.

Fast Dry Cement 250ml Can in Tyre Repair Chemicals Section

Fast dry cement with brush included. Suitable for fixing patches, plugs and string.

Flap Wheel (60 Grit) in Tyre Repair Tools & Accesories Section

FLOOR STANDING PARTS & COMPONENTS WASHER in Draper Section

For the degreasing of component parts prior to assembly. Sturdy steel construction, enamelled finish with lid. Fitted with BS approved non-rewireable 3 pin moulded plug and cable. Carton packed.
Features:
•   Built-in replaceable filter
•   Self-latching fusible linked fire cover
•   Chromed flexible metal fluid delivery pipes
•   Fully enclosed electric pump and fully screened pump       housing
•   Removable shelf keeps parts out of solvent during       inspection and drying
•   Immersion soaking when parts shelf removed
•   Non welded one-piece tank
•   Comprehensive instruction manual
•   Not suitable for use with solvent based cleaning fluids

Specification:
Pump output (per hour)   ...   227L
Motor   ...   25W - 230V AC
Working tank capacity   ...   54.5L
Dimensions:
Overall   ...   Length: 800mm
      ...   Width: 550mm
      ...   Height: 890mm
Tank-internal   ...   Length: 725mm
      ...   Width: 490mm
      ...   Height: 270mm
Weight   ...   32kg

FLOOR STANDING PARTS & COMPONENTS WASHER in General Accessories Section

FLOOR STANDING PARTS & COMPONENTS WASHER in Tyre Fitting Tools Section

FLOOR STANDING PARTS & COMPONENTS WASHER in Tyre Repair Tools & Accesories Section

FLOOR STANDING PARTS & COMPONENTS WASHER in Workshop Tools Section

Fluorescent safety jacket in Personal Safety Equipment Section

Full length blue chrome valve sleeve and cap for 418 in Coloured Metallic Sleeves & Caps Section

Full length blue chrome valve sleeve and cap for 418. Valves not included.

Full length gold chrome valve sleeve and cap for 412 in Coloured Metallic Sleeves & Caps Section

Full length gold chrome valve sleeve and cap for 412. Valves not included.

Full length gold chrome valve sleeve and cap for 414 in Coloured Metallic Sleeves & Caps Section

Full length gold chrome valve sleeve and cap for 414. Valves not included.

Full length gold chrome valve sleeve and cap for 418 in Coloured Metallic Sleeves & Caps Section

Full length gold chrome valve sleeve and cap for 418. Valves not included.

Full length green chrome valve sleeve and cap for 414 in Coloured Metallic Sleeves & Caps Section

Full length green chrome valve sleeve and cap for 414. Valves not included.

Full length green chrome valve sleeve and cap for 418 in Coloured Metallic Sleeves & Caps Section

Full length green chrome valve sleeve and cap for 418. Valves not included.

Full length purple chrome valve sleeve and cap for 414 in Coloured Metallic Sleeves & Caps Section

Full length purple chrome valve sleeve and cap for 414. Valves not included.

Full length purple chrome valve sleeve and cap for 418 in Coloured Metallic Sleeves & Caps Section

Full length purple chrome valve sleeve and cap for 418. Valves not included.

Full length red chrome valve sleeve and cap for 413 in Coloured Metallic Sleeves & Caps Section

Full length red chrome valve sleeve and cap for 413. Valves not included.

Full length red chrome valve sleeve and cap for 414 in Coloured Metallic Sleeves & Caps Section

Full length red chrome valve sleeve and cap for 414. Valves not included.

Full length red chrome valve sleeve and cap for 418 in Coloured Metallic Sleeves & Caps Section

Full length red chrome valve sleeve and cap for 418. Valves not included.

GENERAL TOOL KIT in Tool Storage Section

Comprises combined roller cabinet chest (size 616 x 330 x 1080mm) with Hammer Drill and a selection of popular hand tools, listed below.

•   Chisel and punch set
•   Circlip plier set
•   Combination pliers
•   Combined MM/AF Silverdrive socket set
•   Crimping tool
•   Curved jaw self grip pliers
•   Diagonal side cutter
•   Digital automotive analyser
•   Drill and accessory kit
•   Flat file & handle
•   Flexible magnetic pick up tool
•   Flexible shaft inspection mirror
•   Hacksaw frame and blades
•   Half round file & handle
•   Halogen hand lamp
•   Hand riveter kit
•   Feeler gauge set
•   Junior hacksaw and blades
•   Latex gloves (large - pack of 10)
•   Long nose pliers
•   Long reach plier set
•   Magnetic parts bowl
•   Measuring tape
•   Mechanics screwdriver set
•   Metric combination spanner set
•   Multi tool
•   Pry bar set
•   Ratchet torque wrench
•   Round file & handle
•   Rubber mallet
•   Tinmans shear
•   Trimming knife & 5 spare blades
•   Two adjustable wrenches
•   Mechanics bit set
•   Draper TX-STAR tamperproof screwdriver set
•   Waterpump pliers
•   Wire scratch brush

GENERAL TOOL KIT in Draper Section

GENERAL TOOL KIT in Tyre Repair Tools & Accesories Section

GENERAL TOOL KIT in Tyre Fitting Tools Section

GENERAL TOOL KIT in Specialist Tool Chests Section

GENERAL TOOL KIT in Workshop Tools Section

Green (Qty 100) in Plastic/Chrome dust caps Section

Green Plastic Cap

Half length blue chrome valve sleeve and cap for 414 in Coloured Metallic Sleeves & Caps Section

Half length blue chrome valve sleeve and cap for 414. Valves not included. This picture for illustration purpose only, this product is a half length sleeve.

Half length blue chrome valve sleeve and cap for 418 in Coloured Metallic Sleeves & Caps Section

Half length blue chrome valve sleeve and cap for 418. Valves not included. This picture for illustration purpose only, this product is a half length sleeve.

Half length gold chrome valve sleeve and cap for 414 in Coloured Metallic Sleeves & Caps Section

Half length gold chrome valve sleeve and cap for 414. Valves not included. This picture fo rillustration purpose only, this product is a half length sleeve.

Half length gold chrome valve sleeve and cap for 418 in Coloured Metallic Sleeves & Caps Section

Half length gold chrome valve sleeve and cap for 418. Valves not included. This picture for illustration purpose only, this product is a half length sleeve.

Half length green chrome valve sleeve and cap for 414 in Coloured Metallic Sleeves & Caps Section

Half length green chrome valve sleeve and cap for 414. Valves not included. This picture fo rillustration purpose only, this product is a half length sleeve.

Half length green chrome valve sleeve and cap for 418 in Coloured Metallic Sleeves & Caps Section

Half length green chrome valve sleeve and cap for 418. Valves not included. This picture for illustration purpose only, this product is a half length sleeve.

Half length purple chrome valve sleeve and cap for 414 in Coloured Metallic Sleeves & Caps Section

Half length purple chrome valve sleeve and cap for 414. Valves not included. This picture for illustration purpose only, this product is a half length sleeve.

Half length purple chrome valve sleeve and cap for 418 in Coloured Metallic Sleeves & Caps Section

Half length purple chrome valve sleeve and cap for 418. Valves not included. This picture for illustration purpose only, this product is a half length sleeve.

Half length red chrome valve sleeve and cap for 414 in Coloured Metallic Sleeves & Caps Section

Half length red chrome valve sleeve and cap for 414. Valves not included. This picture for illustration purpose only, this product is a half length sleeve.

Half length red chrome valve sleeve and cap for 418 in Coloured Metallic Sleeves & Caps Section

Half length red chrome valve sleeve and cap for 418. Valves not included. This picture for illustration purpose only, this product is a half length sleeve.

Hand Rasp in Tyre Repair Tools & Accesories Section

To roughen the interior of a tyre wound before plugging. With pistol-grip handle.

Heat Re-Groover (Cutter / Regroover) in Tyre Repair Tools & Accesories Section

The Re-Groover is designed for comfortable operating and maximum grooving maneuverability.

Heat Re-Groover (Cutter / Regroover) in Tyre Repair Accessories Section

The Re-Groover is designed for comfortable operating and maximum grooving maneuverability.

Heavy Duty Cement 1 litre Can in Black Jack Repair Chemicals and Compounds Section

Heavy Duty Cement 1 litre Can

Heavy Duty Cement 1 litre Can in Tyre Repair Chemicals Section

Heavy Duty Cement 1 litre Can

Heavy Duty Cement 237ml can in Black Jack Repair Chemicals and Compounds Section

Heavy Duty Cement in 237ml can with brush in lid for easy application. This glue is blue to help with precision application.

Heavy Duty Cement 237ml can in Tyre Repair Chemicals Section

Heavy Duty Cement in 237ml can with brush in lid for easy application. This glue is blue to help with precision application.

Heavy Duty Cement 237ml can in Homepage Section

Heavy Duty Cement in 237ml can with brush in lid for easy application. This glue is blue to help with precision application.

Heavy duty hand wipes (bucket of 150) in Personal Safety Equipment Section

Heavy duty hand wipes to remove all traces of oil and grease. Supplied in a plastic bucket of 150.

Heavy duty hand wipes (bucket of 150) in Heavy Duty Hand Wipes Section

Heavy duty hand wipes to remove all traces of oil and grease. Supplied in a plastic bucket of 150.

Heavy duty hand wipes (pk 100) in Personal Safety Equipment Section

Heavy duty hand wipes to remove all traces of oil and grease. Supplied in a plastic packet of 100.

Heavy duty hand wipes (pk 100) in Heavy Duty Hand Wipes Section

Heavy duty hand wipes to remove all traces of oil and grease. Supplied in a plastic packet of 100.

Heavy Duty Hose reel (18m) in Air hoses and reels Section

This hose reel has top and bottom wide space integral mounting bosses. These are built into the case therefore giving this hose extra mounting stability. It comes complete with a service pin locking port for total safety during all service work. The new ratchet tensioning systems allow tension adjustment in the field and the full flow swivels allow product delivery with no flow restrictions. This advanced heavy-duty hose reel also has an all-positional locking system, which is 360� x 360� allowing the reel to be mounted in any position whether it be the wall, floor, ceiling or pit.

Hi Flow Truck 180 System in Depot Nitrogen Inflation Section

Hi Flow Truck system suitable for retail outlets serving passenger cars, LGV's and trucks. This system has a 13bar pressure rating for high-pressure speedy inflation for the largest truck tyre. Tyre Bay Direct works closely with Uniflate to provide the latest technologically advanced nitrogen tyre inflation system along with a professional continuing service providing an engineer advice line.

Download our latest Uniflate Flyer (Includes Technical Specifications)

Nitrogen Inflation vs Compressed air (independent tests) 54 truck tyres were used � 33 inflated with Nitrogen, 21 with Compressed air

Tyres inflated with Nitrogen ran 26% more miles before having to be replaced.
Tyres Inflated with Nitrogen gave 48% more miles before failing.
Tyres Inflated with Nitrogen had a smaller failure percentage than compressed air, 30 % compared to 57%.

How it Works

The rubber in tubeless tyres is not 100% impermeable � that is to say that air or gas will escape over time.
Different gases escape at different rates. Uniflate Nitrogen does not contain the components of Compressed air that are prone to escape therefore remains in the tyre cavity for a longer period of time giving stable and consistent tyre pressures.

Who uses Nitrogen?

Nitrogen is used in all Aircraft tyres for safety due to the explosion risk caused by oxygen
Nitrogen is used in earth moving vehicles due to the risk of latent heat explosion.
Uniflate Nitrogen has been the sole inflation medium for all Formula 1 tyres for over a decade.

Why choose the Uniflate system? Equipment �

The Uniflate system can be installed by professional Uniflate engineers with up to 4 outlet points around your workshop meaning you can inflate tyres wherever you need.
Optional extras include Digital inflation panel, Oxygen content analyser and a range of POS material.
Once installed, Uniflate systems provide a constant supply of Nitrogen without the need to order or stock any bulky bottles. Uniflate systems generate Nitrogen on site.

Service and support �

All Uniflate systems come with a starter pack including posters, quick guide booklets and exclusive valvesleeves.
All customers have access to a dedicated technical help line for any sales or engineering advice.
All customers are automatically placed on our website under distributors, allowing potential customers to find them easily. The website experiences around 1000 unique hits a month.

Under inflated tyres cost money.

Under inflation and over loading causes heat build up leading to heat related damage and failure.
Under inflation reduce tyre life and increase fuel consumption due to increased drag.
Incorrect tyre pressures cause vehicle handling and road holding to be affected.

Hi Flow Truck 180 System in Nitrogen Section

Download our latest Uniflate Flyer (Includes Technical Specifications)

Nitrogen Inflation vs Compressed air (independent tests) 54 truck tyres were used � 33 inflated with Nitrogen, 21 with Compressed air

Tyres inflated with Nitrogen ran 26% more miles before having to be replaced.
Tyres Inflated with Nitrogen gave 48% more miles before failing.
Tyres Inflated with Nitrogen had a smaller failure percentage than compressed air, 30 % compared to 57%.

How it Works

The rubber in tubeless tyres is not 100% impermeable � that is to say that air or gas will escape over time.
Different gases escape at different rates. Uniflate Nitrogen does not contain the components of Compressed air that are prone to escape therefore remains in the tyre cavity for a longer period of time giving stable and consistent tyre pressures.

Who uses Nitrogen?

Nitrogen is used in all Aircraft tyres for safety due to the explosion risk caused by oxygen
Nitrogen is used in earth moving vehicles due to the risk of latent heat explosion.
Uniflate Nitrogen has been the sole inflation medium for all Formula 1 tyres for over a decade.

Why choose the Uniflate system? Equipment �

The Uniflate system can be installed by professional Uniflate engineers with up to 4 outlet points around your workshop meaning you can inflate tyres wherever you need.
Optional extras include Digital inflation panel, Oxygen content analyser and a range of POS material.
Once installed, Uniflate systems provide a constant supply of Nitrogen without the need to order or stock any bulky bottles. Uniflate systems generate Nitrogen on site.

Service and support �

All Uniflate systems come with a starter pack including posters, quick guide booklets and exclusive valvesleeves.
All customers have access to a dedicated technical help line for any sales or engineering advice.
All customers are automatically placed on our website under distributors, allowing potential customers to find them easily. The website experiences around 1000 unique hits a month.

Under inflated tyres cost money.

Under inflation and over loading causes heat build up leading to heat related damage and failure.
Under inflation reduce tyre life and increase fuel consumption due to increased drag.
Incorrect tyre pressures cause vehicle handling and road holding to be affected.

Hi Flow Truck 180 System in Uniflate Nitrogen Section

Download our latest Uniflate Flyer (Includes Technical Specifications)

Nitrogen Inflation vs Compressed air (independent tests) 54 truck tyres were used � 33 inflated with Nitrogen, 21 with Compressed air

Tyres inflated with Nitrogen ran 26% more miles before having to be replaced.
Tyres Inflated with Nitrogen gave 48% more miles before failing.
Tyres Inflated with Nitrogen had a smaller failure percentage than compressed air, 30 % compared to 57%.

How it Works

The rubber in tubeless tyres is not 100% impermeable � that is to say that air or gas will escape over time.
Different gases escape at different rates. Uniflate Nitrogen does not contain the components of Compressed air that are prone to escape therefore remains in the tyre cavity for a longer period of time giving stable and consistent tyre pressures.

Who uses Nitrogen?

Nitrogen is used in all Aircraft tyres for safety due to the explosion risk caused by oxygen
Nitrogen is used in earth moving vehicles due to the risk of latent heat explosion.
Uniflate Nitrogen has been the sole inflation medium for all Formula 1 tyres for over a decade.

Why choose the Uniflate system? Equipment �

The Uniflate system can be installed by professional Uniflate engineers with up to 4 outlet points around your workshop meaning you can inflate tyres wherever you need.
Optional extras include Digital inflation panel, Oxygen content analyser and a range of POS material.
Once installed, Uniflate systems provide a constant supply of Nitrogen without the need to order or stock any bulky bottles. Uniflate systems generate Nitrogen on site.

Service and support �

All Uniflate systems come with a starter pack including posters, quick guide booklets and exclusive valvesleeves.
All customers have access to a dedicated technical help line for any sales or engineering advice.
All customers are automatically placed on our website under distributors, allowing potential customers to find them easily. The website experiences around 1000 unique hits a month.

Under inflated tyres cost money.

Under inflation and over loading causes heat build up leading to heat related damage and failure.
Under inflation reduce tyre life and increase fuel consumption due to increased drag.
Incorrect tyre pressures cause vehicle handling and road holding to be affected.

Hi Flow Truck 180 System in Homepage Section

Download our latest Uniflate Flyer (Includes Technical Specifications)

Nitrogen Inflation vs Compressed air (independent tests) 54 truck tyres were used � 33 inflated with Nitrogen, 21 with Compressed air

Tyres inflated with Nitrogen ran 26% more miles before having to be replaced.
Tyres Inflated with Nitrogen gave 48% more miles before failing.
Tyres Inflated with Nitrogen had a smaller failure percentage than compressed air, 30 % compared to 57%.

How it Works

The rubber in tubeless tyres is not 100% impermeable � that is to say that air or gas will escape over time.
Different gases escape at different rates. Uniflate Nitrogen does not contain the components of Compressed air that are prone to escape therefore remains in the tyre cavity for a longer period of time giving stable and consistent tyre pressures.

Who uses Nitrogen?

Nitrogen is used in all Aircraft tyres for safety due to the explosion risk caused by oxygen
Nitrogen is used in earth moving vehicles due to the risk of latent heat explosion.
Uniflate Nitrogen has been the sole inflation medium for all Formula 1 tyres for over a decade.

Why choose the Uniflate system? Equipment �

The Uniflate system can be installed by professional Uniflate engineers with up to 4 outlet points around your workshop meaning you can inflate tyres wherever you need.
Optional extras include Digital inflation panel, Oxygen content analyser and a range of POS material.
Once installed, Uniflate systems provide a constant supply of Nitrogen without the need to order or stock any bulky bottles. Uniflate systems generate Nitrogen on site.

Service and support �

All Uniflate systems come with a starter pack including posters, quick guide booklets and exclusive valvesleeves.
All customers have access to a dedicated technical help line for any sales or engineering advice.
All customers are automatically placed on our website under distributors, allowing potential customers to find them easily. The website experiences around 1000 unique hits a month.

Under inflated tyres cost money.

Under inflation and over loading causes heat build up leading to heat related damage and failure.
Under inflation reduce tyre life and increase fuel consumption due to increased drag.
Incorrect tyre pressures cause vehicle handling and road holding to be affected.

High Quality Zinc Coated Adhesive Weight Strips 2.5g sections - Matt in Self Adhesive Weights Section

High quality self-adhesive weight strips - 30 grams per strip divided into 12 x 2.5g sections. Supplied in boxes of 100. These weights have a matt finish. Application of Adhesive weights 1 � Preparation work Rotate the tyre and determine the wheel imbalance in both planes. Ideally the weight, rim and ambient temperature should be around 15 degrees centigrade as this enables the adhesive backing to perform at its best. Clean the rims with an appropriate cleaning agent to avoid grease and silicone residues on the rim. 2 � Removing the protective backing Having identified the weight position to the rim, peel off the protective backing without touching the adhesive. 3 � Assembling the weight Now press the weight to the rim from the middle towards the outer edges. The pressure should be applied for at least 20 seconds. After assembly 80%-90% of the final adhesive force is achieved after approx 24hrs. Full adhesive force is achieved after 72 hrs.

High Quality Zinc Coated Adhesive Weight Strips 5g & 10g sections - Polished in Self Adhesive Weights Section

High quality self-adhesive wheel weight strips, 60g strips divided into 5g and 10g sections with a polished finish. Application of Adhesive Weights 1 � Preparation work Rotate the tyre and determine the wheel imbalance in both planes. Ideally the weight, rim and ambient temperature should be around 15 degrees centigrade as this enables the adhesive backing to perform at its best. Clean the rims with an appropriate cleaning agent to avoid grease and silicone residues on the rim. 2 � Removing the protective backing Having identified the weight position to the rim, peel off the protective backing without touching the adhesive. 3 � Assembling the weight Now press the weight to the rim from the middle towards the outer edges. The pressure should be applied for at least 20 seconds. After assembly 80%-90% of the final adhesive force is achieved after approx 24hrs. Full adhesive force is achieved after 72 hrs.

High Quality Zinc Coated Self-adhesive Weights 2.6kg Roll in Self Adhesive Weights Section

These weights are a fantastic way to save money in the tyre bay. With each 2.6kg roll equivalent to 43 strips and a huge reduction in wastage due to the handy roll format, why not try them today? Dispenser not included. Application of Adhesive Weights 1 � Preparation work Rotate the tyre and determine the wheel imbalance in both planes. Ideally the weight, rim and ambient temperature should be around 15 degrees centigrade as this enables the adhesive backing to perform at its best. Clean the rims with an appropriate cleaning agent to avoid grease and silicone residues on the rim. 2 � Removing the protective backing Having identified the weight position to the rim, peel off the protective backing without touching the adhesive. 3 � Assembling the weight Now press the weight to the rim from the middle towards the outer edges. The pressure should be applied for at least 20 seconds. After assembly 80%-90% of the final adhesive force is achieved after approx 24hrs. Full adhesive force is achieved after 72 hrs.

High Quality Zinc Coated Self-adhesive Weights 5kg Roll in Self Adhesive Weights Section

These weights are a fantastic way to save money in the tyre bay. With each 5kg roll equivalent to 83 strips and a huge reduction in wastage due to the handy roll format, why not try them today? Application of Adhesive Weights 1 � Preparation work Rotate the tyre and determine the wheel imbalance in both planes. Ideally the weight, rim and ambient temperature should be around 15 degrees centigrade as this enables the adhesive backing to perform at its best. Clean the rims with an appropriate cleaning agent to avoid grease and silicone residues on the rim. 2 � Removing the protective backing Having identified the weight position to the rim, peel off the protective backing without touching the adhesive. 3 � Assembling the weight Now press the weight to the rim from the middle towards the outer edges. The pressure should be applied for at least 20 seconds. After assembly 80%-90% of the final adhesive force is achieved after approx 24hrs. Full adhesive force is achieved after 72 hrs.

Hydraulic Jack Oil in Range of Jacks Section

Superior lubrication to maintain peak performance from your airtools and compressors.

Hydraulic Jack Oil in Prema Section

Superior lubrication to maintain peak performance from your airtools and compressors.

Industrial Beaded Hand Cleaning Gel in Tyre Fitting Chemicals Section

Industrial Beaded Hand Cleaning Gel 5Kg

Inner liner Sealant in Tyre Repair Chemicals Section

Inner liner sealant for use Over Buff Sealant on the buffed inner liner around the repair after installation Special offer!

Inner liner Sealant in Special Offers Section

Inner liner sealant for use Over Buff Sealant on the buffed inner liner around the repair after installation Special offer!

Insert Tool in Tyre Repair Tools & Accesories Section

Insert tool with pistol-grip handle for insertion of repair string.

Jump Leads in Personal Safety Equipment Section

Jump Leads - 16" Heavy Duty (400amp) complete with pouch

Latex Gloves - Large (Box 100) in Workshop Tools Section

Durable one use gloves for the dirtiest of jobs

Latex Gloves - Large (Box 100) in Tyre Fitting Tools Section

Durable one use gloves for the dirtiest of jobs

Latex Gloves - Large (Box 100) in Latex Gloves (Box 100) Section

Durable one use gloves for the dirtiest of jobs

Latex Gloves - Medium (Box 100) in Workshop Tools Section

Durable one use gloves for the dirtiest of jobs

Latex Gloves - Medium (Box 100) in Latex Gloves (Box 100) Section

Durable one use gloves for the dirtiest of jobs

Latex Gloves - Medium (Box 100) in Tyre Fitting Tools Section

Durable one use gloves for the dirtiest of jobs

Latex Gloves - X Large (Box 100) in Latex Gloves (Box 100) Section

Durable one use gloves for the dirtiest of jobs

Latex Gloves - X Large (Box 100) in Tyre Fitting Tools Section

Durable one use gloves for the dirtiest of jobs

Latex Gloves - X Large (Box 100) in Workshop Tools Section

Durable one use gloves for the dirtiest of jobs

Lead free Self Adhesive Weight Strips (Box 100) - Polished in Self Adhesive Weights Section

High quality self-adhesive wheel weight strips, 60g strips divided into 5g sections with a polished finish. Application of Adhesive Weights 1 � Preparation work Rotate the tyre and determine the wheel imbalance in both planes. Ideally the weight, rim and ambient temperature should be around 15 degrees centigrade as this enables the adhesive backing to perform at its best. Clean the rims with an appropriate cleaning agent to avoid grease and silicone residues on the rim. 2 � Removing the protective backing Having identified the weight position to the rim, peel off the protective backing without touching the adhesive. 3 � Assembling the weight Now press the weight to the rim from the middle towards the outer edges. The pressure should be applied for at least 20 seconds. After assembly 80%-90% of the final adhesive force is achieved after approx 24hrs. Full adhesive force is achieved after 72 hrs.

Lead free Self Adhesive Weight Strips (Box 100) - Polished in Balance Weights Section

Lead free Self Adhesive Weight Strips (Box 50) - Matt in Self Adhesive Weights Section

High quality self-adhesive wheel weight strips, 60g strips divided into 5g sections with a Matt finish. Application of Adhesive Weights

Leak Detection Fluid in Tyre Repair Chemicals Section

1 litre Bottle of leak detection fluid for use on tyres, tubes, valves, and rims.

Lever Pack in Special Offers Section

Set of 4 levers: 12", 16", 24" and 32".

Lever Pack in Homepage Section

Set of 4 levers: 12", 16", 24" and 32".

Lever Pack in Tyre Fitting Tools Section

Set of 4 levers: 12", 16", 24" and 32".

Light comercial Kit in Wheel Balancing Accessories Section

Transit cone and spacer for balancing LGV's, Taxis and other wheels with large centre holes

Linseal Tyre Sealant 1 litre in New Products Section

Linseal is a revolutionary liquid puncture preventative. It remains liquid inside a tyre or inner tube and will instantly seal a hole in the tread area if applied before a puncture occurs. As the wheel rotates, the product is spread evenly across the inner surface of the tyre. When a puncture occurs and air escapes, the air pressure forces Linseal into the wound producing a strong, airtight seal which will last the life of the tyre or tube. Unlike other aerosol products on the market containing latex, Linseal will not harm the tyre, and can seal a puncture up to 10mm in diameter. Suitable for all these types of tyres: *Lawnmowers *Garden machinery *Tractors *Agricultural trailers *Trucks *Industrial plant quipment *Quads/ATV *Earthmovers *Forklifts *Caravans *Trailers *Bicycles *Wheelchairs *Electric scooters *Golf carts Please note we do not recommend this product for use on passenger vehicles.

Linseal Tyre Sealant 1 litre in Tyre Repair Chemicals Section

Long Nose Pliers - 11" in Workshop Tools Section

Machine assembled prior to delivery / Collection in Machine Options Section

Chosen machine will be unpacked and assemled by one of our engineers. It will be fully commisioned and delivered ready to be connected to air and / or electric

Measuring Calipers in Tyre Fitting Tools Section

Measuring Calipers - Measuring the width of the wheel prior to balancing.

Motorcycle adaptor for Wheel Balancer in Wheel Balancing Accessories Section

Universal Motorcycle adaptor for Unite Wheel Balancer only.

Motorcycle adaptors for Tyre Changer in Garage Equipment Section

Set of 4 adataptors for use on all Unite Machinery for the mounting and de-mounting of Motorcycle Wheel / Tyre combinations

Motorcycle adaptors for Tyre Changer in Unite Tyre Changers Section

Set of 4 adataptors for use on all Unite Machinery for the mounting and de-mounting of Motorcycle Wheel / Tyre combinations

Nitrogen Tyre Inflation in Section

Tyre Bay Direct works closely with Uniflate to provide the latest technologically advanced nitrogen tyre inflation system along with a professional continuing service. Nitrogen Inflation vs Compressed air (independent tests) 54 truck tyres were used � 33 inflated with Nitrogen, 21 with Compressed air

Tyres inflated with Nitrogen ran 26% more miles before having to be replaced.
Tyres Inflated with Nitrogen gave 48% more miles before failing.
Tyres Inflated with Nitrogen had a smaller failure percentage than compressed air, 30 % compared to 57%.

How it Works

The rubber in tubeless tyres is not 100% impermeable � that is to say that air or gas will escape over time.
Different gases escape at different rates. Uniflate Nitrogen does not contain the components of Compressed air that are prone to escape therefore remains in the tyre cavity for a longer period of time giving stable and consistent tyre pressures.

Who uses Nitrogen?

Nitrogen is used in all Aircraft tyres for safety due to the explosion risk caused by oxygen
Nitrogen is used in earth moving vehicles due to the risk of latent heat explosion.
Uniflate Nitrogen has been the sole inflation medium for all Formula 1 tyres for over a decade.

Why choose the Uniflate system? Equipment �

1. The Uniflate system can be installed by professional Uniflate engineers with up to 4 outlet points around your workshop meaning you can inflate tyres wherever you need.
Optional extras include Digital inflation panel, Oxygen content analyser and a range of POS material.
Once installed, Uniflate systems provide a constant supply of Nitrogen without the need to order or stock any bulky bottles. Uniflate systems generate Nitrogen on site.

Service and support �

All Uniflate systems come with a starter pack including posters, quick guide booklets and exclusive valvesleeves.
Under the rental option all costs are covered even breakdown call outs and replacement parts.
All customers have access to a dedicated technical help line for any sales or engineering advice.
All customers are automatically placed on our website under distributors, allowing potential customers to find them easily. The website experiences around 1000 unique hits a month.

Under inflated tyres cost money.

Under inflation and over loading causes heat build up leading to heat related damage and failure.
Under inflation reduce tyre life and increase fuel consumption due to increased drag.
Incorrect tyre pressures cause vehicle handling and road holding to be affected.

Nitrogen Tyre Inflation Installation in Depot Nitrogen Inflation Section

If you would like your Inflation System installed by one of our engineers, add this product to your cart

Nitrogen Tyre Inflation Installation in Uniflate Nitrogen Section

If you would like your Inflation System installed by one of our engineers, add this product to your cart

Nitrogen Tyre Inflation Installation - Additional Outlet in Depot Nitrogen Inflation Section

Uniflate engineers will install pipework for additional outlets within the workshop. Tyre inflation can then be done away from the main nitrogen machine and can be placed near workstations / ramps.

Nitrogen Tyre Inflation Installation - Additional Outlet in Uniflate Nitrogen Section

Uniflate engineers will install pipework for additional outlets within the workshop. Tyre inflation can then be done away from the main nitrogen machine and can be placed near workstations / ramps.

Orange Plastic Cap (QTY 100) in Plastic/Chrome dust caps Section

Orange Plastic Cap

Parts Washer - 75 litre in Workshop Tools Section

A 75 Litre sink for washing engine parts. The cabinet is made from durable steel with a pillar-box red powder coat finish.

Patch Plug Combo 1/4" (6mm) Stem box 40 in Black Jack Repair Plugs Section

Box of 40 plugs to repair a 6mm injury to a tyre. Repairs the hole and surface with one product, protecting against leaks and seals against humidity.

Patch Plug Combo 1/8" (3mm) Stem box 40 in Special Offers Section

Box of 40 plugs to repair a 3mm injury to a tyre. Repairs the hole and surface with one product, protecting against leaks and seals against humidity.

Patch Plug Combo 1/8" (3mm) Stem box 40 in Black Jack Repair Plugs Section

Box of 40 plugs to repair a 3mm injury to a tyre. Repairs the hole and surface with one product, protecting against leaks and seals against humidity.

Patch Plug Combo 10mm Stem (8) in Black Jack Repair Plugs Section

Patch Plug Combo 10mm Stem (8)

Patch Plug Combo 10mm Stem (8) in Homepage Section

Patch Plug Combo 10mm Stem (8)

Patch Plug Combo 8mm Stem (20) in Black Jack Repair Plugs Section

Patch Plug Combo 8mm Stem (20)

Patch Plug Combo 8mm Stem (40) in Black Jack Repair Plugs Section

Patch Plug Combo 8mm Stem (40)

PCL 1/2" Impact Wrench in Air Wrenches Section

This 1/2" impact wrench is a general purpose impact wrench with a maximum torque of 540Nm. It has forward and reverse mode with 4 forward operation impact settings. Complete with a non slip comfortable grip and single handed direction change, provides excellent balance and has a pin clutch hammer mechanism. 1/2" Square Drive 550 max torque 2.6 kg 0.68 m/s vibration

PCL 1/2" Impact Wrench in PCL - Pneumatic Components Ltd Section

PCL 1/2" Impact Wrench (700Nm composite body) in Air Wrenches Section

This 1/2" impact wrench comes with a maximum torque of 700Nm complete with a fully insulated handle and housing with a non-slip, warm comfortable grip. With forward and reverse mode and 4 forward operation impact settings. It has a positive action trigger allowing variable speed and a rear exhaust through the handle. It has a twin hammer mechanism and a progressive throttle. 1/2" Square Drive 700 max torque 2.65 kg 1.55m/s vibration

PCL 1/2" Impact Wrench (700Nm composite body) in PCL - Pneumatic Components Ltd Section

PCL 10m hose complete with standard adaptors (10mm bore) in Air hoses and reels Section

This is a PCL 10m x 10mm hose that comes with a standard adaptor and vertex coupling already fitted and has a 3/8" Inside Diametre.

PCL 10m hose complete with standard adaptors (10mm bore) in Air Hose and Connectors Section

This is a PCL 10m x 10mm hose that comes with a standard adaptor and vertex coupling already fitted and has a 3/8" Inside Diametre.

PCL 10m hose complete with standard adaptors (10mm bore) in PCL - Pneumatic Components Ltd Section

This is a PCL 10m x 10mm hose that comes with a standard adaptor and vertex coupling already fitted and has a 3/8" Inside Diametre.

PCL 10m hose complete with standard adaptors (8mm bore) in Air hoses and reels Section

This is a PCL 10m x 10mm hose that comes with a standard adaptor and vertex coupling already fitted and has a 5/16" Inside Diameter

PCL 10m hose complete with standard adaptors (8mm bore) in Air Hose and Connectors Section

This is a PCL 10m x 10mm hose that comes with a standard adaptor and vertex coupling already fitted and has a 5/16" Inside Diameter

PCL 10m hose complete with standard adaptors (8mm bore) in PCL - Pneumatic Components Ltd Section

This is a PCL 10m x 10mm hose that comes with a standard adaptor and vertex coupling already fitted and has a 5/16" Inside Diameter

PCL 5m hose complete with standard adaptors (10mm bore) in Air hoses and reels Section

This is a PCL 5m x 10mm hose that comes with a standard adaptor and vertex coupling already fitted and has a 3/8" Inside Diameter.

PCL 5m hose complete with standard adaptors (10mm bore) in Air Hose and Connectors Section

This is a PCL 5m x 10mm hose that comes with a standard adaptor and vertex coupling already fitted and has a 3/8" Inside Diameter.

PCL 5m hose complete with standard adaptors (10mm bore) in PCL - Pneumatic Components Ltd Section

This is a PCL 5m x 10mm hose that comes with a standard adaptor and vertex coupling already fitted and has a 3/8" Inside Diameter.

PCL Accura Gauge - Brand New Model in Gauges Section

PCL Accura Type 1 Gauge complete with 6ft hose and single clip on connector. Sophisticated handheld electronic tyre inflator with leading electronics and sensor technology as well as patented software algorithms. this gauge is accurate and trouble-free for all of your tyre inflation and deflation requirements. * Robust electronic design * Ceramic sensor * Clear and easy to read digital display * Modern, lightweight and shock resistant construction * Proprietary software increasing accuracy, fine metering and eliminating the chance of false readings * Direct valve design increasing inflation and deflation rates * Individually tested and certified * Built in swivel and hanging device * Over pressure warning if pressure exceeds 12 bar / 174 lbf/in� / 1200 kPa * Long battery life

PCL Accura Gauge - Brand New Model in PCL - Pneumatic Components Ltd Section

PCL Dial Type Gauge with Single Clip on Connector in Gauges Section

PCL Dial Type Gauge with single clip on connector This dial tyre airline gauge has guaranteed accuracy as it complies with EC Directive (86/217/EEC) � Bar scale only. With it�s cast aluminium body complete with an impact absorbing rubber bumper it is robust and durable. It has a slime line design making it attractive and easy to hold. It�s large clear dial provides an accurate and easy to read scale. Made with a state of the art ergonomically designed trigger, this gauge is comfortable and easy to use with its �2 click� action. The dial tyre airline gauge has a wide range choice of tyre valve connectors and hose lengths. It has been tested and has a unique serial number and is supplied with a certificate of calibration.

PCL MK 3 Gauge with Twin Clip on and 2.7m hose in Gauges Section

MK 3 Gauge with Twin Clip on and 2.7m hose Reduced operating costs with fast inflation and deflation rates make this gauge economically friendly. It has a long life due to excellent shock resistance with robust durable design and construction. It is suitable for indoor and outdoor environments, commercial and retail applications. This Mk3 gauge provides guaranteed accuracy as it complies with BS EN 12645:1999 and EC Directive 86/217/EEC. It is easy to install with full instructions supplied and it has been tested and has a unique serial number and is supplied with a Certificate of Calibration The new valve design increases inflation speed (500 l/min @ 13 bar supply). It measures bar, lbf/in� and kPa calibrations and a large range of options and accessories. It has a very attractive cast aluminium body and a magnified clear linear gauge display.

PCL MK 3 Gauge with Twin Clip on and 2.7m hose in PCL - Pneumatic Components Ltd Section

PCL MK3 Gauge w/single clip-on connector and 21" hose in Gauges Section

Reduced operating costs with fast inflation and deflation rates make this gauge economically friendly. It has a long life due to excellent shock resistance with robust durable design and construction. It is suitable for indoor and outdoor environments, commercial and retail applications. This MK3 gauge provides guaranteed accuracy as it complies with BS EN 12645:1999 and EC Directive 86/217/EEC. It is easy to install with full instructions supplied and it has been tested and has a unique serial number and is supplied with a Certificate of Calibration The new valve design increases inflation speed (500 l/min @ 13 bar supply). It measures bar, lbf/in� and kPa calibrations and a large range of options and accessories. It has a very attractive cast aluminium body and a magnified clear linear gauge display.

PCL MK3 Gauge w/single clip-on connector and 21" hose in PCL - Pneumatic Components Ltd Section

PCL MK3 twin clip-on connector with 1.8m hose in Gauges Section

MK3 Twin clip-on connector with 1.8m hose Reduced operating costs with fast inflation and deflation rates make this gauge economically friendly. It has a long life due to excellent shock resistance with robust durable design and construction. It is suitable for indoor and outdoor environments, commercial and retail applications. This Mk3 gauge provides guaranteed accuracy as it complies with BS EN 12645:1999 and EC Directive 86/217/EEC. It is easy to install with full instructions supplied and it has been tested and has a unique serial number and is supplied with a Certificate of Calibration The new valve design increases inflation speed (500 l/min @ 13 bar supply). It measures bar, lbf/in� and kPa calibrations and a large range of options and accessories. It has a very attractive cast aluminium body and a magnified clear linear gauge display.

PCL MK3 twin clip-on connector with 1.8m hose in PCL - Pneumatic Components Ltd Section

PCL MK3 Twin Hold On Connector with 21" hose in Gauges Section

PCL MK3 gauge w/21" Hose w/twin hold-on connector. Reduced operating costs with fast inflation and deflation rates make this gauge economically friendly. It has a long life due to excellent shock resistance with robust durable design and construction. It is suitable for indoor and outdoor environments, commercial and retail applications. This Mk3 gauge provides guaranteed accuracy as it complies with BS EN 12645:1999 and EC Directive 86/217/EEC. It is easy to install with full instructions supplied and it has been tested and has a unique serial number and is supplied with a Certificate of Calibration The new valve design increases inflation speed (500 l/min @ 13 bar supply). It measures bar, lbf/in� and kPa calibrations and a large range of options and accessories. It has a very attractive cast aluminium body and a magnified clear linear gauge display.

PCL MK3 Twin Hold On Connector with 21" hose in PCL - Pneumatic Components Ltd Section

PCL Twin Clip On Connector (Closed End) in End Fittings Section

PCL Twin Clip-on closed end

PCL Twin Clip On Connector (Closed End) in PCL - Pneumatic Components Ltd Section

PCL Twin Clip-on closed end

PCL Twin Clip On Connector (Open End) in End Fittings Section

PCL Twin Clip-on open end

PCL Twin Clip On Connector (Open End) in PCL - Pneumatic Components Ltd Section

PCL Twin Clip-on open end

PCL Twin Hold On Connector (Closed End) in End Fittings Section

PCL Twin hold-on Connector-closed end

PCL Twin Hold On Connector (Closed End) in PCL - Pneumatic Components Ltd Section

PCL Twin hold-on Connector-closed end

PCL Twin Hold-On Connector (Open End) in End Fittings Section

PCL Twin hold-on connector-pen end

PCL Twin Hold-On Connector (Open End) in PCL - Pneumatic Components Ltd Section

PCL Twin hold-on connector-pen end

Pink Scuffs - Set of 4 in Scuffs - Alloy Wheel Protection Section

Plastic Handled Valve Key in Tyre Fitting Tools Section

Ergonomically designed, small and simple to use plastic handled valve key

Plastic Handled Valve Key (100mm extended shank) in Tyre Fitting Tools Section

Ergonomically designed, small and simple to use plastic handled valve key with 100mm extended shank

Plastic Handled Valve Key (Double Ended) in Tyre Fitting Tools Section

Ergonomically designed, small and simple to use double ended plastic handled valve key

Plastic handled Wire Brush in Tyre Repair Tools & Accesories Section

Strong plastic handled wire brush making rim cleaning and rust removing an easy job

Plastic handled Wire Brush in Tyre Repair Accessories Section

Strong plastic handled wire brush making rim cleaning and rust removing an easy job

Pneumatic tyre spreader in Workshop Tools Section

Powerful Pneumatic tyre spreader to make repair of inner tyre a simple operation. Trigger operated the pneumatic ram and claws will open up the bead of the tyre with a simple push, giving full and easy access to the repair area. Requires 8-10 bar compressed air supply.

Pneumatic tyre spreader in Special Offers Section

Pneumatic tyre spreader in Pneumatic Tyre Spreader Section

Portable safety cage in Safety cages Section

This portable safety cage is fabricated from an RHS steel structure. The Portable Safety Cage provides protection for the operator should the tyre over inflated and burst.

Pro-Bike Standard Kit in Wheel Balancing Accessories Section

This motorcycle kit is available to enable standard car balancers to handle motorcycle rims, interchanging simply and quickly with the car mounting kit. The Pro-Bike standard system can be used for all conventional motorcycle rims but not suitable for monolever type rims. It is available along with manufacturer specific units such as Ducati, Honda etc. When ordering please specify model of balancer and shaft size if known.

PTFE (Teflon Tape) 0.03" x 0.5" x 260" in Workshop Tools Section

Quality Universal Weight Pliers in Tyre Fitting Tools Section

For fitting, removing and cutting vehicle wheel weights. Made from drop forged carbon steel hardened, tempered, heat treated and plated finish for corrosion protection with PVC dipped handles. Manufactured by Draper, leaders in tool since 1919.

Quality Universal Weight Pliers in Workshop Tools Section

Quick Release Locking Wing Nut for Unite Balancer in Wheel Balancing Accessories Section

Quick Release Locking Wing Nut for Unite Balancer, suitable only for Unite brand machinery.

Radial Repair Patches (100mm x 200mm) Pk 10 in Limited Availability Section

Repair Patches for Radial Tyres

Radial Repair Patches (80mm x 125mm) Pk 10 in Section

Repair Patches for Radial Tyres

RAM-ROD MAX 22.5 - Truck Tyre Bead Breaker in Bead Breakers Section

Gently breaks the bead on the most stubborn of tyres in seconds! Especially suitable for EVA wheel rims. Gently breaks the bead on the most stubborn of tyres. Simple, safe and reliable. Takes only seconds to fit and operate. Does not use a �screw down drive�. Does not require an air supply. Angled geometry ensures the tyre bead is pushed down parallel to wheel rim wall. Sculptured & polished foot plate is kind to tyre walls. 3 pin fixing gives a stable operating platform. Fully portable - only weighs 23Kg. Comes with painted & plated finish. Comes with FREE 6 tonne Bottle Jack. Optional Adaptor Bar for satisfying all wheel configurations Optional Protector Plate with Vulcanised rubber surface to protect alloy wheels.

RATCHET TIE DOWN STRAP in Draper Section

Quality webbing with two hooks. Proof load Stock Nos. 64216-750kg; 64217-1000kg; 64218-100kg. Display carton.

RATCHET TIE DOWN STRAP in General Accessories Section

Quality webbing with two hooks. Proof load Stock Nos. 64216-750kg; 64217-1000kg; 64218-100kg. Display carton.

Red (Qty 100) in Plastic/Chrome dust caps Section

Red Scuffs - Set of 4 in Scuffs - Alloy Wheel Protection Section

Refillable Repair Material Pack in Homepage Section

1 x Pic Pac Rack 1 x 35mm all purpose patch box 1 x 60mm all purpose patch box 1 x 35mm Tube patch box 1 x 45mm All purpose patch box 1 x 45mm Radial patch box 1 x Liquid Buffing Cleaner 1 x Fast Dry Cement

Refillable Repair Material Pack in Black Jack Refillables Section

Refillable Repair Material Pack in Black Jack Repair Chemicals and Compounds Section

Refillable Repair Material Pack in Special Offers Section

Refillable Repair Material Pack in Tyre Repair Chemicals Section

Retail Centre System in Nitrogen Section

Suitable for retail outlets serving passenger cars and LGV's. Tyre Bay Direct works closely with Uniflate to provide the latest technologically advanced nitrogen tyre inflation system along with a professional continuing service providing an engineer advice line.

Download our latest Uniflate Flyer (Includes Technical Specifications)

Nitrogen Inflation vs Compressed air (independent tests) 54 truck tyres were used � 33 inflated with Nitrogen, 21 with Compressed air

Tyres inflated with Nitrogen ran 26% more miles before having to be replaced.
Tyres Inflated with Nitrogen gave 48% more miles before failing.
Tyres Inflated with Nitrogen had a smaller failure percentage than compressed air, 30 % compared to 57%.

How it Works

The rubber in tubeless tyres is not 100% impermeable � that is to say that air or gas will escape over time.
Different gases escape at different rates. Uniflate Nitrogen does not contain the components of Compressed air that are prone to escape therefore remains in the tyre cavity for a longer period of time giving stable and consistent tyre pressures.

Who uses Nitrogen?

Nitrogen is used in all Aircraft tyres for safety due to the explosion risk caused by oxygen
Nitrogen is used in earth moving vehicles due to the risk of latent heat explosion.
Uniflate Nitrogen has been the sole inflation medium for all Formula 1 tyres for over a decade.

Why choose the Uniflate system? Equipment �

The Uniflate system can be installed by professional Uniflate engineers with up to 4 outlet points around your workshop meaning you can inflate tyres wherever you need.
Optional extras include Digital inflation panel, Oxygen content analyser and a range of POS material.
Once installed, Uniflate systems provide a constant supply of Nitrogen without the need to order or stock any bulky bottles. Uniflate systems generate Nitrogen on site.

Service and support �

All Uniflate systems come with a starter pack including posters, quick guide booklets and exclusive valvesleeves.
All customers have access to a dedicated technical help line for any sales or engineering advice.
All customers are automatically placed on our website under distributors, allowing potential customers to find them easily. The website experiences around 1000 unique hits a month.

Under inflated tyres cost money.

Under inflation and over loading causes heat build up leading to heat related damage and failure.
Under inflation reduce tyre life and increase fuel consumption due to increased drag.
Incorrect tyre pressures cause vehicle handling and road holding to be affected.

Retail Centre System in Uniflate Nitrogen Section

Download our latest Uniflate Flyer (Includes Technical Specifications)

Nitrogen Inflation vs Compressed air (independent tests) 54 truck tyres were used � 33 inflated with Nitrogen, 21 with Compressed air

Tyres inflated with Nitrogen ran 26% more miles before having to be replaced.
Tyres Inflated with Nitrogen gave 48% more miles before failing.
Tyres Inflated with Nitrogen had a smaller failure percentage than compressed air, 30 % compared to 57%.

How it Works

The rubber in tubeless tyres is not 100% impermeable � that is to say that air or gas will escape over time.
Different gases escape at different rates. Uniflate Nitrogen does not contain the components of Compressed air that are prone to escape therefore remains in the tyre cavity for a longer period of time giving stable and consistent tyre pressures.

Who uses Nitrogen?

Nitrogen is used in all Aircraft tyres for safety due to the explosion risk caused by oxygen
Nitrogen is used in earth moving vehicles due to the risk of latent heat explosion.
Uniflate Nitrogen has been the sole inflation medium for all Formula 1 tyres for over a decade.

Why choose the Uniflate system? Equipment �

The Uniflate system can be installed by professional Uniflate engineers with up to 4 outlet points around your workshop meaning you can inflate tyres wherever you need.
Optional extras include Digital inflation panel, Oxygen content analyser and a range of POS material.
Once installed, Uniflate systems provide a constant supply of Nitrogen without the need to order or stock any bulky bottles. Uniflate systems generate Nitrogen on site.

Service and support �

All Uniflate systems come with a starter pack including posters, quick guide booklets and exclusive valvesleeves.
All customers have access to a dedicated technical help line for any sales or engineering advice.
All customers are automatically placed on our website under distributors, allowing potential customers to find them easily. The website experiences around 1000 unique hits a month.

Under inflated tyres cost money.

Under inflation and over loading causes heat build up leading to heat related damage and failure.
Under inflation reduce tyre life and increase fuel consumption due to increased drag.
Incorrect tyre pressures cause vehicle handling and road holding to be affected.

Retail Centre System in Homepage Section

Download our latest Uniflate Flyer (Includes Technical Specifications)

Nitrogen Inflation vs Compressed air (independent tests) 54 truck tyres were used � 33 inflated with Nitrogen, 21 with Compressed air

Tyres inflated with Nitrogen ran 26% more miles before having to be replaced.
Tyres Inflated with Nitrogen gave 48% more miles before failing.
Tyres Inflated with Nitrogen had a smaller failure percentage than compressed air, 30 % compared to 57%.

How it Works

The rubber in tubeless tyres is not 100% impermeable � that is to say that air or gas will escape over time.
Different gases escape at different rates. Uniflate Nitrogen does not contain the components of Compressed air that are prone to escape therefore remains in the tyre cavity for a longer period of time giving stable and consistent tyre pressures.

Who uses Nitrogen?

Nitrogen is used in all Aircraft tyres for safety due to the explosion risk caused by oxygen
Nitrogen is used in earth moving vehicles due to the risk of latent heat explosion.
Uniflate Nitrogen has been the sole inflation medium for all Formula 1 tyres for over a decade.

Why choose the Uniflate system? Equipment �

The Uniflate system can be installed by professional Uniflate engineers with up to 4 outlet points around your workshop meaning you can inflate tyres wherever you need.
Optional extras include Digital inflation panel, Oxygen content analyser and a range of POS material.
Once installed, Uniflate systems provide a constant supply of Nitrogen without the need to order or stock any bulky bottles. Uniflate systems generate Nitrogen on site.

Service and support �

All Uniflate systems come with a starter pack including posters, quick guide booklets and exclusive valvesleeves.
All customers have access to a dedicated technical help line for any sales or engineering advice.
All customers are automatically placed on our website under distributors, allowing potential customers to find them easily. The website experiences around 1000 unique hits a month.

Under inflated tyres cost money.

Under inflation and over loading causes heat build up leading to heat related damage and failure.
Under inflation reduce tyre life and increase fuel consumption due to increased drag.
Incorrect tyre pressures cause vehicle handling and road holding to be affected.

Retail Centre System with Reel in Nitrogen Section

Download our latest Uniflate Flyer (Includes Technical Specifications)

Nitrogen Inflation vs Compressed air (independent tests) 54 truck tyres were used � 33 inflated with Nitrogen, 21 with Compressed air

Tyres inflated with Nitrogen ran 26% more miles before having to be replaced.
Tyres Inflated with Nitrogen gave 48% more miles before failing.
Tyres Inflated with Nitrogen had a smaller failure percentage than compressed air, 30 % compared to 57%.

How it Works

The rubber in tubeless tyres is not 100% impermeable � that is to say that air or gas will escape over time.
Different gases escape at different rates. Uniflate Nitrogen does not contain the components of Compressed air that are prone to escape therefore remains in the tyre cavity for a longer period of time giving stable and consistent tyre pressures.

Who uses Nitrogen?

Nitrogen is used in all Aircraft tyres for safety due to the explosion risk caused by oxygen
Nitrogen is used in earth moving vehicles due to the risk of latent heat explosion.
Uniflate Nitrogen has been the sole inflation medium for all Formula 1 tyres for over a decade.

Why choose the Uniflate system? Equipment �

The Uniflate system can be installed by professional Uniflate engineers with up to 4 outlet points around your workshop meaning you can inflate tyres wherever you need.
Optional extras include Digital inflation panel, Oxygen content analyser and a range of POS material.
Once installed, Uniflate systems provide a constant supply of Nitrogen without the need to order or stock any bulky bottles. Uniflate systems generate Nitrogen on site.

Service and support �

All Uniflate systems come with a starter pack including posters, quick guide booklets and exclusive valvesleeves.
All customers have access to a dedicated technical help line for any sales or engineering advice.
All customers are automatically placed on our website under distributors, allowing potential customers to find them easily. The website experiences around 1000 unique hits a month.

Under inflated tyres cost money.

Under inflation and over loading causes heat build up leading to heat related damage and failure.
Under inflation reduce tyre life and increase fuel consumption due to increased drag.
Incorrect tyre pressures cause vehicle handling and road holding to be affected.

Retail Centre System with Reel in Homepage Section

Download our latest Uniflate Flyer (Includes Technical Specifications)

Nitrogen Inflation vs Compressed air (independent tests) 54 truck tyres were used � 33 inflated with Nitrogen, 21 with Compressed air

Tyres inflated with Nitrogen ran 26% more miles before having to be replaced.
Tyres Inflated with Nitrogen gave 48% more miles before failing.
Tyres Inflated with Nitrogen had a smaller failure percentage than compressed air, 30 % compared to 57%.

How it Works

The rubber in tubeless tyres is not 100% impermeable � that is to say that air or gas will escape over time.
Different gases escape at different rates. Uniflate Nitrogen does not contain the components of Compressed air that are prone to escape therefore remains in the tyre cavity for a longer period of time giving stable and consistent tyre pressures.

Who uses Nitrogen?

Nitrogen is used in all Aircraft tyres for safety due to the explosion risk caused by oxygen
Nitrogen is used in earth moving vehicles due to the risk of latent heat explosion.
Uniflate Nitrogen has been the sole inflation medium for all Formula 1 tyres for over a decade.

Why choose the Uniflate system? Equipment �

The Uniflate system can be installed by professional Uniflate engineers with up to 4 outlet points around your workshop meaning you can inflate tyres wherever you need.
Optional extras include Digital inflation panel, Oxygen content analyser and a range of POS material.
Once installed, Uniflate systems provide a constant supply of Nitrogen without the need to order or stock any bulky bottles. Uniflate systems generate Nitrogen on site.

Service and support �

All Uniflate systems come with a starter pack including posters, quick guide booklets and exclusive valvesleeves.
All customers have access to a dedicated technical help line for any sales or engineering advice.
All customers are automatically placed on our website under distributors, allowing potential customers to find them easily. The website experiences around 1000 unique hits a month.

Under inflated tyres cost money.

Under inflation and over loading causes heat build up leading to heat related damage and failure.
Under inflation reduce tyre life and increase fuel consumption due to increased drag.
Incorrect tyre pressures cause vehicle handling and road holding to be affected.

REVERSIBLE AIR DRILL WITH 10MM KEYLESS CHUCK in Drills, Ratchets, hammers and cut off tools Section

For general drilling work in the workshop and automotive trade. Lightweight and powerful with a reversing facility and Jacobs keyless chuck. Display carton. Specification:
Spindle thread   ...   3/8" x 24 tpi
Free speed   ...   1800rpm
Operating air pressure   ...   90psi (6.2bar)
Average air consumption   ...   4.0cfm (114L/min)
Minimum hose size   ...   3/8" I.D
Air inlet   ...   1/4" BSP
Weight   ...   1.06kg

REVERSIBLE AIR DRILL WITH 10MM KEYLESS CHUCK in Draper Section

Rillfit 4 Heat Re-Groover (Cutter / Regroover) in Tyre Repair Accessories Section

The Rillfit Re-Groover is designed for comfortable operating and maximum grooving maneuverability. Only a slight amount of pressure is needed in order for the Micro-Switch controlled cutting heads to activate the heating element. It has an adjustable 4-step transformer that supplies current and heat by corresponding to blade resistance value. Blades are fed the exact amount of energy required for smooth effortless cutting. The Rillfit heat re-groover is an easy to use, comfortable, pocket-sized tool for re-grooving tyres.

Rillfit 4 Heat Re-Groover (Cutter / Regroover) in Tyre Repair Tools & Accesories Section

Rimtite / Rim-Seal in Tyre Repair Chemicals Section

Rim Seal mounting paste for creating a professional seal on corroded rims

Rimtite / Rim-Seal in Tyre Fitting Chemicals Section

Rim Seal mounting paste for creating a professional seal on corroded rims

Rubber Scraper in Tyre Repair Tools & Accesories Section

Sturdily built with a steel blade.

Sack Truck in Workshop Tools Section

Heavy duty red powder coated sack truck with 10" air tyres.

Safety Glasses (clear) in Personal Safety Equipment Section

Safety glasses to fit around the ears

Safety goggles with head strap in Personal Safety Equipment Section

Clear plastic safety goggles, complete with head strap

SAGE PAY in Section

Screw on Tyre Valve Mounter (Metal) in Tyre Fitting Tools Section

Tyre Valves Mounter

Screw on Tyre Valve Mounter (PVC) in Tyre Fitting Tools Section

Screw on PVC tyre valve mounter to protect alloy wheels.

Scuffs Starter Kit in Scuffs - Alloy Wheel Protection Section

Scuffs are universal fitting alloy wheel rim protectors manufactured from a length of tough, flexible and shock absorbent material and have undergone full digital stress and performance testing. The unique registered design (patent pending) absorbs slow speed kerb impact protecting the outside edge of your rims, the bit that really matters and look unsightly when damaged. Rimblades can be used to prevent damage from occurring to new wheels or to cover up existing damage making older damaged wheels look new again. This Kit Gives you everything you need to offer your customers the latest in Alloy wheel protection including; 8 Silver Scuff Protectors 4 Black Scuff Protectors 4 Red Scuff Protectors 1 litre IPA cleaning soloution 250ml Primer soloution 2 x Promotional posters 1 x 50 cm Sample strip for Demonstration With a RRP to your customer of �39.99 these products offer you a great return. Fitting Guide 1. Clean and Prepare the rim as if you were applying adhesive weights. Preparation of the wheels surface is very important and should not be overlooked. 2. Using an IPA Soloution (available seperatley), thoroughly clean wheel rims, then go over area where the Scuffs will fit using the primer (Sold Seperatley). 3. Removing the tape backing as you go, fit the Scuffs to the wheels ensuring carefully they are applied evenly around the wheels edge. 4. Carefully mark and cut the Scuffs squarely where the ends meet and join using the glue provided. 5. Push down firmly all the way round the wheels with firm equal pressure as the tape is pressure activated.

Self Adhesive Weight Remover in Workshop Tools Section

Specialised tool made from durable plastic to avoid causing any damage to alloy wheels when removing self adhesive weights.

Self Adhesive Weight Remover in Tyre Fitting Tools Section

Specialised tool made from durable plastic to avoid causing any damage to alloy wheels when removing self adhesive weights.

Self Adhesive Weight Strips (5 Boxes) in Special Offers Section

Special offer - These high quality weights are in 5g sections only and contain 60g per strip with 50 strips per box. These weights have a polished finish and are on offer at �50 for 5 boxes for a limited time only Application of Adhesive weights 1 � Preparation work Rotate the tyre and determine the wheel imbalance in both planes. Ideally the weight, rim and ambient temperature should be around 15 degrees centigrade as this enables the adhesive backing to perform at its best. Clean the rims with an appropriate cleaning agent to avoid grease and silicone residues on the rim. 2 � Removing the protective backing Having identified the weight position to the rim, peel off the protective backing without touching the adhesive. 3 � Assembling the weight Now press the weight to the rim from the middle towards the outer edges. The pressure should be applied for at least 20 seconds. After assembly 80%-90% of the final adhesive force is achieved after approx 24hrs. Full adhesive force is achieved after 72 hrs.

Self-adhesive Weights 5kg Roll x 5 in Special Offers Section

Self-adhesive Weights 5kg Roll x 5 in Balance Weights Section

Self-adhesive Weights 5kg Roll x 5 in Self Adhesive Weights Section

Semi Automatic Tyre Changer 20" -Unite U200 in Garage Equipment Section

Semi Automatic, swing arm version tyre changer, with clamping capacity up to 20�. Suitable for most passenger and light commercial tyre changing and also suitable for Motorcycle tyre changing with additional adaptors. This 20� Semi Automatic Tyre Changer is the perfect machine for a new start business, for anyone thinking of bringing the tyre fitting business back into their workshop or if you are looking for a reliable replacement machine for standard tyre fitting work. This tyre machine offers outstanding value but isn�t short on features. With a motorised turntable, pneumatically operated clamping jaws and powerful Pneumatic bead breaker this is the kind of Tyre Fitting Equipment that can get you started with confidence. Unite U200

Semi Automatic Tyre Changer 20" -Unite U200 in Unite Tyre Changers Section

Semi Automatic Tyre Changer 20" -Unite U200 in Tyre Changers & Balancers Section

Semi Automatic Tyre Changer 24" - Unite U201 in Garage Equipment Section

This 24� Semi Automatic Tyre Changer has the same robust design and build quality as the 20� Unite Tyre Changer but has the increased table capacity to handle 24� rims with internal clamping and 21� External Clamping. This tyre machine offers great value whilst being able to cope easily with larger tyre and rim combinations. With a fully motorised turntable, pneumatically operated clamping jaws and powerful Pneumatic bead breaker with over 2.7 tonnes of force, this is the kind of Tyre Fitting Equipment that is going to stand you in good stead for years to come. Unite U201

Semi Automatic Tyre Changer 24" - Unite U201 in Unite Tyre Changers Section

Semi Automatic Tyre Changer 24" - Unite U201 in Tyre Changers & Balancers Section

Set of Flush Fit Valves 11.5mm Pack of 4 in Specialist Valves Section

Used by motorsport teams worldwide, these flush fit valves are a universal fit. Pack includes 4 valves, dustcaps and 1 airline adaptor.

Silver Scuffs - Set of 4 in Scuffs - Alloy Wheel Protection Section

Single Clip-on (closed end) for 6.35mm in End Fittings Section

Single Clip-on (closed end) for 6.35mm (1/4) bore hose

Single Clip-on (open end) for 4.75mm in End Fittings Section

Single Clip-on (open end) for 4.75mm (3/16") bore hose

Single clip-on (open end) for 6.35mm in End Fittings Section

Single clip-on (open end) for 6.35mm (1/4) bore hose

Single Lift Standard Bottle Jack, 15 tonne in Weber Range of Jacks Section

Cap (Kg) 1500 Single Lift YES Saddle Type ROUND Bev. Base YES Min. Height(mm) 230 Hyd. Lift (mm) 155 Ext. Screw (mm) 110 Max. Height (mm) 495 Net. Weight (Kg) 8.8

Single Lift Standard Bottle Jack, 15 tonne in Weber Section

Cap (Kg) 1500 Single Lift YES Saddle Type ROUND Bev. Base YES Min. Height(mm) 230 Hyd. Lift (mm) 155 Ext. Screw (mm) 110 Max. Height (mm) 495 Net. Weight (Kg) 8.8

Special Offer Repair Pack in Limited Availability Section

Save over 24%! Universal Patches 35mm Repair Patches qty 100 55x75mm Repair Patches qty 20

Tube Patches 35mm Round Tube Patch re-usable box qty 30 55mm Round Tube Patch re-usable box qty 30

Repair String 8� Thin Black Repair String qty 50 Insert tool x 1

Special Offer Repair Pack in Special Offers Section

Spider Wrench - 16" in General Accessories Section

Spider Wrench - 16" in Tyre Fitting Tools Section

Spiral Cement Tool in Tyre Repair Tools & Accesories Section

Spiral tool to apply cement to the interior of a tyre injury before positioning the plug or string.

Standard Adaptor 1/4 Female in Standard fitting range Section

The PCL Standard Adaptor is suitable for most workshop compressed air applications. Designed and manufactured alongside PCL Standard Couplings, this range of standard adaptors has become the benchmark in the UK for quality and reliability. Used in most workshop/garage environments Wide choice of thread and bore sizes Used with AIRFLOW, VERTEX, twin, non-corrodible and standard safety couplings all highlighted in this directory. Case hardened for longer life

Standard Adaptor 1/4 male in Standard fitting range Section

Standard Impact Socket 1/2" Drive - 8mm in Section

Standard Ultra Low, Weber Trolley Jack - 2 Ton Floor Jack in Weber Range of Jacks Section

2 Ton Floor Jack from Weber Cap. Kg 2000 �A� Min HT (mm) 80 �B� Max Ht (mm) 500 �C� Frame LT (mm) 660 �D� Frame HT (mm) 160 �E� Frame Width (mm) 410 Q-LIFT N NT WT 30

Standard Ultra Low, Weber Trolley Jack - 2 Ton Floor Jack in Weber Section

2 Ton Floor Jack from Weber Cap. Kg 2000 �A� Min HT (mm) 80 �B� Max Ht (mm) 500 �C� Frame LT (mm) 660 �D� Frame HT (mm) 160 �E� Frame Width (mm) 410 Q-LIFT N NT WT 30

Static Safety Cage in Safety cages Section

This static safety cage is fabricated from RHS steel structure. The Static Safety Cage provides protection for the operator whilst inflating larger tyres in the event of the tyre exploding due to over inflation. The Static Safety Cage is a necessity in the workshop to comply with Health & Safety Executive legislation.

Stich Roller in Tyre Repair Tools & Accesories Section

Use to ensure an even seal between patch and tyre.

STL Alloy Wheel Refurbishment Spraybooth in Spraybooths Section

Installation of a Wheel Sprayout cabin will enable you to take advantage of the growing demand for wheel refurbishment and avoid the need to outsource this valuable element of service. Wheel re-finishing can be programmed along with the body work in hand and the facility will enable you to provide a more flexible and cost effective service which you will be in control of. � Available in one or four wheel formats � Single wheel option can be incorporated into a paint mixing room � Four wheel option available as a stand alone unit � Can be incorporated into a Smart Repair facility for spraying in a clean air filtered environment � Doubles up as a test panel or small component Sprayout facility Construction The Wheel SprayOut Cabin is an open fronttype spraybooth, consisting a double-skinned steel panel enclosure with dimensions 2.9m deep x 2.5m wide x 2.4m high, and a 1.2m wide access. Filtration The rear wall of the Cabin consists a 2m x 2.4m extraction unit, fitted with EPA standard duplex filters, complete with racking system. Extraction A single, high efficiency 1.7kW direct-drive fan provides a maximum air throughput of 6,000m3/hr, made up by workshop air, ensuring that air speed at the booth entrance is in excess of 0.7m/s required by HSE regulations, and that all paint overspray is safely filtered to EPA requirements and ducted to atmosphere. Lighting The cabin is fitted with an STL pod light unit, consisting triple fluorescent tube system with electronic switchgear, mounted within an acrylic pod, providing instant, flicker-free and uniform illumination rated at over 1200lux. Service and support Quality nationwide coverage, with regionally based Corgi-registered engineers providing service back-up and customer support. Warranty Standard 12-month warranty Optional 3 year warranty with service package All prices are subject to a site survey by STL

STL Alloy Wheel Refurbishment Spraybooth in Special Offers, New Products & Misc. Items Section

STL Alloy Wheel Refurbishment Spraybooth in STL Section

Straight extensions Long collar 180mm in Standard Snap in Valves Section

Straight extensions Short collar in Standard Snap in Valves Section

For extension of valves for extra length

Tail adaptor R 1/4 for 4.75mm (3/16") bore hose in Air Hose and Connectors Section

Tail adaptor R 1/4 for 4.75mm (3/16") bore hose

Telescopic, Low Profile, 10 Tonne Bottle Jack in Weber Range of Jacks Section

Capacity (Kg) 10000 Telescopic YES Saddle Tyre Round Bev. Base YES Min. Height(mm) 120 Hyd. Life (mm) 100 Ext. Screw 0 Full Ext' Height 220 Net Weight(Kg) 7.5

Telescopic, Low Profile, 10 Tonne Bottle Jack in Weber Section

Capacity (Kg) 10000 Telescopic YES Saddle Tyre Round Bev. Base YES Min. Height(mm) 120 Hyd. Life (mm) 100 Ext. Screw 0 Full Ext' Height 220 Net Weight(Kg) 7.5

test in Section

test

Three cone set in Wheel Balancing Accessories Section

A standard set of three centring cones covered 42-99.5 mm centre holes. Available to suit any brand of wheel balancer. On ordering this product please email us your balancer's make, model and shaft size to ensure the correct product is delivered.

TOOL CHEST KIT in Tool Storage Section

Handy tool kit with tool chest, for use in the engineering workshop or garage. Tool chest overall size: 600 x 260 x 340mm with six drawers.

Contents;
•   5M/16ft measuring tape
•   Adjustable wrench
•   Feeler gauge set
•   Combination pliers
•   Crimping tool kit
•   Curved jaw self grip pliers
•   Diagonal side cutter
•   Hacksaw frame and blades
•   Junior hacksaw and blades
•   Large latex gloves (pack of 10)
•   Long nose pliers
•   6 screwdrivers (2 x plain slot; 2 x cross slot; 2 x PZ TYPE)
•   Metric combination spanner set
•   Metric hexagon key set
•   MM/AF combined socket set
•   Pry bar set
•   Tinmans shears
•   Trimming knife and blades
•   Waterpump pliers
•   Mechanics bit set
•   Wire brush
•   Rubber mallet

TOOL CHEST KIT in Draper Section

TOOL CHEST KIT in Tyre Repair Tools & Accesories Section

TOOL CHEST KIT in Tyre Fitting Tools Section

TOOL CHEST KIT in Specialist Tool Chests Section

TOOL CHEST KIT in Workshop Tools Section

TPMS Kit 1 in TPMS Kits, Trigger tools and Workshop tools Section

TPMS Kit 1 is ideal for a basic starter kit for people with diagnostic equipment. It gives you a small package of service kits, service valves together with the ATEQ VT15 trigger tool, the grommet removal tool and the core and valve torque tools for a basic service. The ATEQ VT15 is a universal trigger tool that is connected to an existing diagnostic machine to trigger the TPMS valve. Please note this Kit is ONLY suitable if you have compatable TPMS diagnostic equipment and software. Included in the kit: Diagnostic & Workshop Tools 1x ATEQ VT15 Trigger Tool 1x ATEQ Low Torque Screwdriver 1x ATEQ Valve Core Torque Tool Service Parts 10 Pack of 5 Service Kits 3 Service Valves 20 Screws for Snap in Valves 5 Snap in Valves 50 Nickel Plated Valve Caps 1 Grommet Removal Tool Plastic Storage Container More sensors can be added to this kit to make a bespoke kit to suit your customer base.

TPMS Sensor Removal Tool in Tyre Fitting Tools Section

This simple to use tool is double ended and will remove most TPMS sensors.

TR218A Air Water Valve 110mm Dia in Specialist Valves Section

Rubber based repair valve for agricultural inner tubes. 110mm diameter base prepared for self vulcanizing application.

TR412 22mm length x 100 in Standard Snap in Valves Section

Tubeless Valves are generally made from rubber with a central core of metal containing the components required for inflating/deflating the tyre and providing air seal. The valve core provides the primary air seal in a tubeless valve, a secondary seal is provided by the valve cap that also acts as a seal to prevent the ingress of dust and moisture into the valve itself. 412 Snap-in Valve 22mm length, 11.5 rim hole Supplied in Bags of 100. This particular size valve is usually used on motorcycles, the short length is ideal.

TR413 (QTY 100) in Chrome Valves Section

TR413c Valve with sleeve & Cap. Supplied in Bags of 100. Special value bulk buy price of �18.05 per bag when 10 bags or more are purchased.

TR413 30mm length x 100 in Standard Snap in Valves Section

Tubeless Valves are generally made from rubber with a central core of metal containing the components required for inflating/deflating the tyre and providing air seal. The valve core provides the primary air seal in a tubeless valve, a secondary seal is provided by the valve cap that also acts as a seal to prevent the ingress of dust and moisture into the valve itself. 413 Snap-in Valve. 30mm length, 11.5 rim hole Supplied in Bags of 100.

TR413AC Chrome Valve with Sleeve and Cap (QTY 100) in Chrome Valves Section

Valve with chrome sleeve and cap. (Full Length) Supplied in bags of 100. Special value bulk buy price of 17.49 per bag when 10 bags or more are purchased

TR413AC Chrome Valve with Sleeve and Cap (QTY 100) x 5 in Chrome Valves Section

Valve with chrome sleeve and cap. (Full Length) Bulk Buy Supplied in bags of 100. Special value bulk buy price of 17.49 per bag when 5 bags or more are purchased

TR414 38mm length x 100 in Standard Snap in Valves Section

Tubeless Valves are generally made from rubber with a central core of metal containing the components required for inflating/deflating the tyre and providing air seal. The valve core provides the primary air seal in a tubeless valve, a secondary seal is provided by the valve cap that also acts as a seal to prevent the ingress of dust and moisture into the valve itself. 414 Snap-in Valves. 38mm length, 11.5 rim hole. Supplied in Bags of 100.

TR414 Customised Valve x 100 in Customised Valves Section

This Exclusive, patented product is available only at Tyre Bay Direct! By customising your valves you ensure that customers will never forget where to come for a great deal on there tyres! PLEASE NOTE VALVES MAY CONTAIN NO MORE THAN 3 LINES AND NO MORE THAN 13 CHARACTERS PER LINE INCLUDING PUNCTUATION AND GRAMMAR. Please note that customised valves may take 7-10 working days to manufacture

TR414AC Chrome Valve with Sleeve and Cap (QTY 100) in Chrome Valves Section

TR414 Valve Chrome Sleeve & Cap. (Full Length) Supplied in bags of 100. Special value bulk buy price of 19.49 per bag when 10 bags or more are purchased

TR414AC Chrome Valve with Sleeve and Cap (QTY 100) x 5 in Chrome Valves Section

TR414 Valve Chrome Sleeve & Cap. (Full Length) Bulk Buy Supplied in bags of 100. Special value bulk buy price of 19.49 per bag when 5 bags or more are purchased

TR414AC-CUST Customised Valve x 100 in Customised Valves Section

TR414AC-CUST Customised Valve x 100 in Chrome Valves Section

TR414C Chrome Valve with Sleeve and Cap (QTY 100) in Chrome Valves Section

TR414 Valve & Chrome sleeve and cap Supplied in bags of 100, Special value bulk buy price of 18.99 per bag when purchasing 10 bags or more

TR414L 45mm length x 100 in Standard Snap in Valves Section

Tubeless Valves are generally made from rubber with a central core of metal containing the components required for inflating/deflating the tyre and providing air seal. The valve core provides the primary air seal in a tubeless valve, a secondary seal is provided by the valve cap that also acts as a seal to prevent the ingress of dust and moisture into the valve itself. 414L Snap-in Valves. 45mm length, 11.5 rim hole. Supplied in Bags of 100.

TR415 Tubeless Valves 32mm length x 25 in Standard Snap in Valves Section

Tubeless Valves are generally made from rubber with a central core of metal containing the components required for inflating/deflating the tyre and providing air seal. The valve core provides the primary air seal in a tubeless valve, a secondary seal is provided by the valve cap that also acts as a seal to prevent the ingress of dust and moisture into the valve itself. This chubby valve with a 15.7mm diameter is suitable for larger rim holes. 415 Snap-in Valves. 32mm length, 15.7 rim hole. Supplied in Bags of 25.

TR418 49mm length x 100 in Standard Snap in Valves Section

Tubeless Valves are generally made from rubber with a central core of metal containing the components required for inflating/deflating the tyre and providing air seal. The valve core provides the primary air seal in a tubeless valve, a secondary seal is provided by the valve cap that also acts as a seal to prevent the ingress of dust and moisture into the valve itself. 418 snap in valve. 49mm length, 11.5 rim hole. Supplied in Bags of 100. A special value price of �7.80 per bag for bulk orders of 10+ bags or more

TR418 Customised Valve x 100 in Customised Valves Section

TR418AC Chrome Valve with Sleeve and Cap (QTY 100) in Chrome Valves Section

418 Valve with chrome sleeve and cap.(Full Length) Supplied in bags of 100. Special value bulk buy price of 24.49 per bag when 10 or more bags are purchased.

TR418AC Chrome Valve with Sleeve and Cap (QTY 100) x 5 in Chrome Valves Section

418 Valve with chrome sleeve and cap.(Full Length) Bulk Buy Supplied in bags of 100. Special value bulk buy price of 24.49 per bag when 5 or more bags are purchased.

TR418C Bulk Buy Valve with sleeve and cap (QTY 100) x 5 in Chrome Valves Section

TR418 Chrome valve with sleeve and cap (3/4 Length) Supplied in bags of 100. Special value bulk buy price of 23.48 per bag on purchases of 5 bags or more.

TR418C Bulk Buy Valve with sleeve and cap (QTY 100) x10 in Chrome Valves Section

TR418 Chrome valve with sleeve and cap (3/4 Length) Supplied in bags of 100. Special value bulk buy price of 23.49 per bag on purchases of 10 bags or more.

TR418C Chrome Valve with Sleeve and cap (QTY 100) in Chrome Valves Section

TR418 Chrome valve with sleeve and cap Supplied in bags of 100. Special value bulk buy price of 23.49 per bag on purchases of 10 bags or more.

Track Rite PPL Laser tracking Gauges in New Products Section

These British manufactured laser wheel alignment gauges offer fast and accurate alignment readings for almost any vehicle. Precision engineered it has been designed for use on both vehicle lifts and on a flat ground surface to provide fast and accurate readings of toe in and toe out adjustments.
Operated by 2 type AA 1.5 v batteries and with ultra low clearance height the Trak Rite PPL 40 offers a smart return on investment. The kit includes a full training manual, conversion disc and 1 year warranty support.

Specification: Wheel Rim Capacities: 8� � 24� Measuring range: +- 2 degrees Measuring accuracy: 10 minutes Beam height: less than 40 mm Laser: Class 2 Eyesafe 650nm, 1.0 milliwatt

Track Rite PPL Laser tracking Gauges in Wheel Alignment Section

Trak-rite XY Laser alignment gauge in Wheel Alignment Section

The Trak-rite XY is a complete wheel calibration system supplied with full instructions, steering wheel lock and brake pedal depressor. With completely wireless operation, sprung aluminium contact pins and easy levelling precision bubble operation it offers simple and effective readings of caster, set back and thrust. Our range of additional accessories can also adapt the gauge for camber readings and the handy wall mount (pictured) is available as an optional extra for just �220. Both front and rear scales are precision marked for accurate readings from high or low angles and from varying distances. The Trak-rite XY Laser alignment gauge comes complete with a full year's warranty support.

Specification: Wheel Rim Capacities: 8� � 20� (24� version available) Measuring range: +- 1 degrees Measuring accuracy: 10 minutes Laser: Class 2 Eyesafe 650nm, 1.0 milliwatt

Trolley Jack - 2 Ton Compact trolley jack with PVC box in Range of Jacks Section

This 2 Ton trolley jack has all ball bearing rear swivel wheels for easy positioning. Comes complete with easy storage PVC box. The trolley jack has a precision release valve for exact height adjustment and has an automatic safety by-pass valve to prevent overloading. It meets all A.N.S.I/A.S.M.E standards. Capacity: 4,000 lbs (2 TON) Maximum clearence height: 5-5 1/6 (135mm) Maximum lift height: 12 - 5/8" (320mm)

Twin Hold On Connector (Closed End) in End Fittings Section

Twin hold-on Connector-closed end

Tyre Aid in Tyre Fitting Tools Section

The revolutionary new Tyre Aid system can be retro fitted to ANY tyre machine to help with rim refurbishment, valve replacement and fitting of run flat tyres. Once the cross bar is fitted it can remain on the machine and causes no interference with normal tyre work.


Step 1 – Fit the cross bar support to your turntable	Step 2 – Insert the position rods as required
Step 3 – Using the tyre aid system, set the clamp position as required for fitting	Step 4 – Using multiple clamps, rims can be refurbished without removing the tyre.

Kit Contains: 1 Cross Bar Support 4 position rods 4 clamps 1 handles and a Selection of extensions and accessories

Tyre Bath in Tyre Repair Accessories Section

A large tyre bath, made of tough black plastic. Large enough to immerse a wheel and tyre assembly in order to check for air leaks.

Tyre Bath in Tyre Repair Tools & Accesories Section

A large tyre bath, made of tough black plastic. Large enough to immerse a wheel and tyre assembly in order to check for air leaks.

Tyre Caddy in Tyre Caddy Section

This purpose built Tyre caddy makes moving multiple tyres around simple. With opening bottom "jaws" to reach under the tyre stack, lifting, moving and dropping up to 8 tyres at a time is a one man operation. This is not a standard "sack truck". The design and operation is directed towards the sole purpose of Tyre movement and this specialist equipment is normally over �200. Get this now at our special introductory price.

Tyre Caddy in Workshop Tools Section

Tyre Caddy in Special Offers Section

Tyre lever Protector Sleeve for Alloy Wheels in Tyre Fitting Tools Section

Tyre Lube (3.78 Litre) in Tyre Repair Chemicals Section

Liquid lubricant with rust inhibitor. This tyre lube has a jelly-like liquid consistency to help in the mount/demount process.

Tyre Lube (5 Litre) in Tyre Repair Accessories Section

Liquid lubricant, with a jelly-like liquid consistency to help in the mount/demount process.

Tyre Lube (5 Litre) in Tyre Repair Chemicals Section

Liquid lubricant, with a jelly-like liquid consistency to help in the mount/demount process.

Tyre Lube (5 Litre) in Tyre Fitting Chemicals Section

Liquid lubricant, with a jelly-like liquid consistency to help in the mount/demount process.

Tyre Lube (5 Litre) in Tyre Repair Tools & Accesories Section

Liquid lubricant, with a jelly-like liquid consistency to help in the mount/demount process.

Tyre marking crayon - white (Qty 12) in Tyre Repair Accessories Section

Ideal for temporary marking of tyres.

Tyre marking crayon - white (Qty 12) in Tyre Repair Chemicals Section

Ideal for temporary marking of tyres.

Tyre marking crayon - white (Qty 12) in Tyre Repair Tools & Accesories Section

Ideal for temporary marking of tyres.

Tyre marking crayon - yellow (Qty 12) in Tyre Repair Chemicals Section

Ideal for temporary marking of tyres.

Tyre marking crayon - yellow (Qty 12) in Tyre Repair Accessories Section

Ideal for temporary marking of tyres.

Tyre marking crayon - yellow (Qty 12) in Tyre Repair Tools & Accesories Section

Ideal for temporary marking of tyres.

Tyre Mounting Paste 5Kg in Tyre Fitting Chemicals Section

Tyre Mounting Paste 5Kg This product helps to eliminate Rim slippage, reduces bead damage and does not freeze or harden.

Tyre Mounting Wax 5Kg in Tyre Fitting Chemicals Section

Tyre Wax 5Kg This product helps to eliminate rim slippage, reduces bead damage and does not freeze or harden.

Tyre Prodder in Tyre Repair Tools & Accesories Section

Tyre Testing tank in Tyre Repair Accessories Section

This tyre-testing tank provides maximum durability as the tank insert is manufactured from heavy-duty tough plastic. The stand is fabricated from RHS steel.

Tyre Testing tank in Tyre Repair Tools & Accesories Section

This tyre-testing tank provides maximum durability as the tank insert is manufactured from heavy-duty tough plastic. The stand is fabricated from RHS steel.

Tyre Tread Depth Gauge in General Accessories Section

This tyre tread depth gauge is approved in the UK by the Department of Transport for MOT testing and also complies with EC Directive 89/459/EEC pocket clip as standard. The tyre tread depth gauge will provide measurement of tyre tread 1-26mm incremented in 1.0mm inc (in 1.6mm mark).

Tyre Tread Depth Gauge in Tyre Fitting Tools Section

Tyre Valve Mounter (Quick Insert) in Tyre Fitting Tools Section

Tyre Valves Mounter Quick Insert

Tyre Valve Tool Black in Tyre Fitting Tools Section

Tyre Valve Tool Black

Uni - Lug (close centre adaptor) in Wheel Balancing Accessories Section

The Uni Lug is specifically designed for the "CLOSED CENTRE " tyres. The hole in the centre of the rim is not big enough to fit over the wheel balancer shaft. This adaptor allows these wheels to be balanced. The most notable feature of these rims is that they are hub located (that�s why the centring rings are required) and the wheel nuts have no taper (the UniLug nut as a rounded end for this). When ordering please specify model of balancer and shaft size if known.

Universal Balancing Kit in Wheel Balancing Accessories Section

Problems Balancing 4x4 wheels? Unable to mount closed centre Peugeot/Citroen wheels? Don't have an adaptor large enough for Light commercial vehicles? Don't send these vehicles to a competitor! If you no longer want to send YOUR customers to your COMPETITOR the Haweka Eco kit is the solution. This kit can convert your wheel balancing machine in being capable of mounting and centring everything coming in through the door thus increasing your tyre turnover and profit and increasing the useage on your balancing machine. When ordering please specify model of balancer and shaft size if known.

Universal barrier and conditioning cream in Personal Safety Equipment Section

Universal barrier and conditioning cream in 1 litre bottle.

Universal barrier and conditioning cream in Tyre Fitting Chemicals Section

Universal barrier and conditioning cream in 1 litre bottle.

Universal Weight Pliers in Tyre Fitting Tools Section

Universal Weight Pliers in Workshop Tools Section

Value Kit of Wheel Locking Nuts in Special Offers Section

One pack of each our sets of wheel locking nuts: - TBDB1 12 x 1.25 male for Peugeot including 4 nuts with reinforced heads and 2 keys. - TBDB2 12 x 1.5 male for Vauxhall and Volkswagon including 4 nuts with reinforced heads and 2 keys. - TBDD4 12 x 1.25 female for Volkswagon, Rover and Ford including 4 nuts with reinforced heads and 2 keys. - TBDD3 12 x 1.5 female for Subaru and Nissan including 4 nuts with reinforced heads and 2 keys.

Value Kit of Wheel Locking Nuts in General Accessories Section

Value Kit of Wheel Locking Nuts in Tyre Fitting Tools Section

Value Repair Kit in Tyre Repair Chemicals Section

45mm Radial Tyre Patch 6mm Repair Plugs Buffing Solution 1 Litre Fast Dry Cement 250ml Stitch Roller Rubber Scraper 2 in 1 Hand Rasp and cement tool

Value Repair Kit in Tyre Repair Accessories Section

45mm Radial Tyre Patch 6mm Repair Plugs Buffing Solution 1 Litre Fast Dry Cement 250ml Stitch Roller Rubber Scraper 2 in 1 Hand Rasp and cement tool

Value Repair Kit in Tyre Repair Tools & Accesories Section

45mm Radial Tyre Patch 6mm Repair Plugs Buffing Solution 1 Litre Fast Dry Cement 250ml Stitch Roller Rubber Scraper 2 in 1 Hand Rasp and cement tool

Value Repair Kit in Special Offers Section

45mm Radial Tyre Patch 6mm Repair Plugs Buffing Solution 1 Litre Fast Dry Cement 250ml Stitch Roller Rubber Scraper 2 in 1 Hand Rasp and cement tool

Value Repair Kit in Hand Tools and Accessories Section

45mm Radial Tyre Patch 6mm Repair Plugs Buffing Solution 1 Litre Fast Dry Cement 250ml Stitch Roller Rubber Scraper 2 in 1 Hand Rasp and cement tool

Valve Fishing Tool in Tyre Fitting Tools Section

Attach to threads through valve hole while mounting inner tubes for easy retrieval.

Valve Knife (Hooked Blade) in Tyre Repair Tools & Accesories Section

Valve Knife (Hooked Blade)

Valve Knife (Straight Blade Rounded) in Tyre Repair Tools & Accesories Section

Valve Knife (Straight Blade Rounded)

Valve Knife (Straight Blade Tapered) in Tyre Repair Tools & Accesories Section

Valve Knife (Straight Blade Tapered)

Wheel Alignment Swivel Plates in Wheel Alignment Section

Stainless Steel Wheel Alignment Plates x 2

Wheel Alignment Swivel Plates in Wheel Alignment Swivel Plates Section

Stainless Steel Wheel Alignment Plates x 2

Wheel Locking Nuts 12 x 1.25 female for Volkswagon, Rover and Ford in General Accessories Section

Set of Wheel Locking Nuts 12 x 1.25 female for Volkswagon, Rover and Ford including 4 nuts with reinforced heads and 2 keys.

Wheel Locking Nuts 12 x 1.25 female for Volkswagon, Rover and Ford in Tyre Fitting Tools Section

Set of Wheel Locking Nuts 12 x 1.25 female for Volkswagon, Rover and Ford including 4 nuts with reinforced heads and 2 keys.

Wheel Locking Nuts 12 x 1.25 female for Volkswagon, Rover and Ford in Wheel Locking Nuts Section

Set of Wheel Locking Nuts 12 x 1.25 female for Volkswagon, Rover and Ford including 4 nuts with reinforced heads and 2 keys.

Wheel Locking Nuts 12 x 1.25 male for Peugeot in Tyre Fitting Tools Section

Set of Wheel Locking Nuts 12 x 1.25 male for Peugeot including 4 nuts with reinforced heads and 2 keys.

Wheel Locking Nuts 12 x 1.25 male for Peugeot in General Accessories Section

Set of Wheel Locking Nuts 12 x 1.25 male for Peugeot including 4 nuts with reinforced heads and 2 keys.

Wheel Locking Nuts 12 x 1.25 male for Peugeot in Wheel Locking Nuts Section

Set of Wheel Locking Nuts 12 x 1.25 male for Peugeot including 4 nuts with reinforced heads and 2 keys.

Wheel Locking Nuts 12 x 1.5 female for Subaru and Nissan in General Accessories Section

Set of Wheel Locking Nuts 12 x 1.5 female for Subaru and Nissan including 4 nuts with reinforced heads and 2 keys.

Wheel Locking Nuts 12 x 1.5 female for Subaru and Nissan in Tyre Fitting Tools Section

Set of Wheel Locking Nuts 12 x 1.5 female for Subaru and Nissan including 4 nuts with reinforced heads and 2 keys.

Wheel Locking Nuts 12 x 1.5 female for Subaru and Nissan in Wheel Locking Nuts Section

Set of Wheel Locking Nuts 12 x 1.5 female for Subaru and Nissan including 4 nuts with reinforced heads and 2 keys.

Wheel Locking Nuts 12 x 1.5 male for Vauxhall and Volkswagon in Tyre Fitting Tools Section

Set of Wheel Locking Nuts 12 x 1.5 male for Vauxhall and Volkswagon including 4 nuts with reinforced heads and 2 keys.

Wheel Locking Nuts 12 x 1.5 male for Vauxhall and Volkswagon in General Accessories Section

Set of Wheel Locking Nuts 12 x 1.5 male for Vauxhall and Volkswagon including 4 nuts with reinforced heads and 2 keys.

Wheel Locking Nuts 12 x 1.5 male for Vauxhall and Volkswagon in Wheel Locking Nuts Section

Set of Wheel Locking Nuts 12 x 1.5 male for Vauxhall and Volkswagon including 4 nuts with reinforced heads and 2 keys.

Wheel nut indicators 19mm (Qty 100) in Safety Wheel Indicating Nuts Section

Supplied in a box of 100.

Wheel nut indicators 24mm (Qty 100) in Safety Wheel Indicating Nuts Section

Supplied in a box of 100.

Wheel nut indicators 27mm (Qty 100) in Safety Wheel Indicating Nuts Section

Supplied in a box of 100.

Wheel nut indicators 28mm (Qty 100) in Safety Wheel Indicating Nuts Section

Supplied in a box of 100.

Wheel nut indicators 30mm (Qty 100) in Safety Wheel Indicating Nuts Section

Supplied in a box of 100.

Wheel nut indicators 32mm (Qty 100) in Safety Wheel Indicating Nuts Section

Supplied in a box of 100.

Wheel nut indicators 33mm (Qty 100) in Safety Wheel Indicating Nuts Section

Supplied in a box of 100.

White (Qty 100) in Plastic/Chrome dust caps Section

Wire Brush in Tyre Repair Tools & Accesories Section

Strong wooden hand held wire brush making rim cleaning and rust removing an easy job

Wire Brush in Tyre Repair Accessories Section

Strong wooden hand held wire brush making rim cleaning and rust removing an easy job

World Cup Valve 414 x 100 in World Cup Valve Section

Offer your customers the chance to support England during the world cup. This World Cup valve is the must have accessory to partner the English Flag.

World Cup Valve 418 x 100 in World Cup Valve Section

Offer your customers the chance to support England during the world cup. This World Cup valve is the must have accessory to partner the English Flag.

XF Adaptor Female 1/4 in XF Fitting Range (High Flow) Section

Designed and manufactured in Sheffield by PCL. This range of XF couplings and adaptors offers excellent flow characteristics providing the workshop with increased airflow and enhanced tool efficiency. High flow rate - 130cfm at 100lbf/in2 Tested to over 1m cycles Offers enhanced tool efficiency Steel construction with corrosive resistant finish for longer life. Steel shoulder prevents accidental disconnection

XF Adaptor Male 1/4 in XF Fitting Range (High Flow) Section

XF Adaptor Tailpiece 8mm in XF Fitting Range (High Flow) Section

XF Coupling 1/4 Female in XF Fitting Range (High Flow) Section

XF Coupling Male in XF Fitting Range (High Flow) Section

XF Safety Coupling Female 1/2 in XF Fitting Range (High Flow) Section

Two stage disconnection - allows safe venting of air & preventing hose whip Suitable for higher flow applications For use with XF adaptors Interchangeable with Rectus 25/26, Cejn 320

XF Safety Coupling Male in Section

Two stage disconnection - allows safe venting of air & preventing hose whip Suitable for higher flow applications For use with XF adaptors Interchangeable with Rectus 25/26, Cejn 320

Yellow (Qty 100) in Plastic/Chrome dust caps Section

Yellow Plastic Cap

Zinc Alloy Coated Weight - 5g x 100 in Lead Free Weights for Alloy Wheels Section

Clip on Weights for Alloy Wheels-5gm x 100 Zinc coated Weights for Alloy Wheels.

Zinc Alloy Coated Weight - 25g x 100 in Lead Free Weights for Alloy Wheels Section

Clip on Weights for Alloy Wheels-25gm x 100 Zinc coated Weights for Alloy Wheels.

Zinc Alloy Coated Weight - 40g x 50 in Lead Free Weights for Alloy Wheels Section

Clip on Weights for Alloy Wheels-40gm x 50 Zinc coated Weights for Alloy Wheels.

Zinc Alloy Coated Weight - 45g x 50 in Lead Free Weights for Alloy Wheels Section

Clip on Weights for Alloy Wheels-45gm x 50 Zinc coated Weights for Alloy Wheels.

Zinc Alloy Coated Weight - 50g x 50 in Lead Free Weights for Alloy Wheels Section

Clip on Weights for Alloy Wheels-50gm x 50 Zinc coated Weights for Alloy Wheels.

Zinc Alloy Coated Weight - 60g x 50 in Lead Free Weights for Alloy Wheels Section

Clip on Weights for Alloy Wheels-60gm x 50 Zinc coated Weights for Alloy Wheels.

Zinc Alloy Coated Weight -10g x 100 in Lead Free Weights for Alloy Wheels Section

Clip on Weights for Alloy Wheels-10gm x 100 Zinc coated Weights for Alloy Wheels.

Zinc Alloy Coated Weight -15g x 100 in Lead Free Weights for Alloy Wheels Section

Clip on Weights for Alloy Wheels-15gm x 100 Zinc coated Weights for Alloy Wheels.

Zinc Alloy Coated Weight -20g x 100 in Lead Free Weights for Alloy Wheels Section

Clip on Weights for Alloy Wheels-20gm x 100 Zinc coated Weights for Alloy Wheels.

Zinc Alloy Coated Weight -30g x 100 in Lead Free Weights for Alloy Wheels Section

Clip on Weights for Alloy Wheels-30gm x 100 Zinc coated Weights for Alloy Wheels.

Zinc Alloy Coated Weight -35g x 50 in Lead Free Weights for Alloy Wheels Section

Clip on Weights for Alloy Wheels-35gm x 50 Zinc coated Weights for Alloy Wheels.

Zinc Alloy Coated Weight -55g x 50 in Lead Free Weights for Alloy Wheels Section

Clip on Weights for Alloy Wheels-55gm x 50 Zinc coated Weights for Alloy Wheels.

Zinc Steel Coated Weight - 20g x 100 in Lead Free weights for Steel Wheels Section

Clip on Weights for Steel Wheels-20gm x 100 Zinc Weights for Steel Wheels.

Zinc Steel Coated Weight - 25g x 100 in Lead Free weights for Steel Wheels Section

Clip on Weights for Steel Wheels-25gm x 100 Zinc Weights for Steel Wheels.

Zinc Steel Coated Weight - 30g x 100 in Lead Free weights for Steel Wheels Section

Clip on Weights for Steel Wheels-30gm x 100 Zinc Weights for Steel Wheels.

Zinc Steel Coated Weight - 35g x 50 in Lead Free weights for Steel Wheels Section

Clip on Weights for Steel Wheels-35gm x 50 Zinc Weights for Steel Wheels.

Zinc Steel Coated Weight - 40g x 50 in Lead Free weights for Steel Wheels Section

Clip on Weights for Steel Wheels-40gm x 50 Zinc Weights for Steel Wheels.

Zinc Steel Coated Weight - 45g x 50 in Lead Free weights for Steel Wheels Section

Clip on Weights for Steel Wheels-45gm x 50 Zinc Weights for Steel Wheels.

Zinc Steel Coated Weight - 50g x 50 in Lead Free weights for Steel Wheels Section

Clip on Weights for Steel Wheels-50gm x 50 Zinc Weights for Steel Wheels.

Zinc Steel Coated Weight - 55g x 50 in Lead Free weights for Steel Wheels Section

Clip on Weights for Steel Wheels-55gm x 50 Zinc Weights for Steel Wheels.

Zinc Steel Coated Weight - 5g x 100 in Lead Free weights for Steel Wheels Section

Clip on Weights for Steel Wheels-5gm x 100 Zinc Weights for Steel Wheels.

Zinc Steel Coated Weight - 60g x 50 in Lead Free weights for Steel Wheels Section

Clip on Weights for Steel Wheels-60gm x 50 Zinc Weights for Steel Wheels.

Zinc Steel Coated Weight -10g x 100 in Lead Free weights for Steel Wheels Section

Clip on Weights for Steel Wheels-10gm x 100 Zinc Weights for Steel Wheels.

Zinc Steel Coated Weight -15g x 100 in Lead Free weights for Steel Wheels Section

Clip on Weights for Steel Wheels-15gm x 100 Zinc Weights for Steel Wheels.