- 4-Way Valve Tool
- Core removal Internal/external thread cleaning Valve re-threading
#
Aa
- Adhesive Weight Tool
- Removes old adhesive weights cleanly
- Adhesive Wheel Weights
- Stick-on weights used for alloy wheels. Applied to the inside of the wheel for a clean finish.
- Air Cylinder
- Provides pneumatic force to operate parts like clamps and bead breaker.
- Air Line / Hose
- Flexible tubing delivering compressed air.
- Air Regulator
- Controls compressed air pressure entering the machine. Prevents damage from excessive pressure.
- Air Valve Caps
- Small caps fitted over valve stems. Protect against dirt and minor air loss.
- Assist Arm / Helper Arm
- Mechanical arm providing extra pressure on the tyre. Used for: Low-profile tyres Run-flat tyres Reduces operator effort and improves safety.
Bb
- Balancing Shaft (Spindle)
- Central shaft where wheel is mounted. Rotates the wheel for imbalance measurement.
- Bead Breaker Arm
- The arm that presses against the tyre sidewall to break the bead seal. Usually operated via pedal or hydraulic system.
- Bead Breaker Blade
- The contact point on the bead breaker arm. Pushes between tyre bead and rim flange.
- Bead Depressing Tool (“3rd Hand Tool”)
- Pushes the tyre bead down into the drop centre of the wheel (the recessed middle section).
- Bead Press Tool / Roller
- Attached to assist arm. Applies continuous pressure to keep bead in drop centre.
- Bead Sealer
- A thick rubber-based sealant applied to the tyre bead before mounting. Ensures an airtight seal between tyre and rim, especially on corroded or imperfect wheels. Commonly used in: Slow air leak fixes Older alloy wheels
- Buffing Solution / Pre-Buff Cleaner
- Solvent-based cleaner applied before repair. Removes dirt, grease, and contaminants to ensure strong adhesion.
- Buffing Tool
- Roughens tyre surface before repair
Cc
- Calibration Weights
- Used to calibrate balancer for accuracy.
- Caliper Arm
- Measures wheel width and position for accurate balancing.
- Carbide Cutter
- Drill-type tool used to prepare damaged tyre areas for repair.
- Clamping Jaws
- Adjustable metal grips on the turntable. Hold the wheel securely (inside or outside clamping). Essential for preventing movement during the mounting process.
- Clip-on Connector / Tyre Inflator Connector
- Attaches airline directly to valve for inflation.
- Column / Tower
- Vertical structure supporting the mount head and arm.
- Cones (Centre Cones)
- Used to centre the wheel on the shaft. Available in different sizes for various wheel bores.
- Connectors / Couplers
- Fittings that connect hoses to tools or compressors.
- Consumables
- Regular-use items such as valves, adhesives, weights, and sealants.
- Control Panel / Display Screen
- Weight placement Imbalance readings Mode selection
Ee
- Encoder / Measuring Arm
- Wheel diameter Offset Distance from machine
Ff
- Foot Pedal Controls
- Pedals used to operate functions such as: Turntable rotation Bead breaker Clamp movement
Hh
- Hand Rasp / Reamer
- Tool used to clean and size puncture holes before repair.
- Heavy Duty Blue Cement
- A thicker, stronger version of vulcanising cement.
Ii
- Inner Liner Sealer
- A liquid sealant applied inside the tyre.
Kk
- Knock-on Wheel Weights
- Metal weights clipped to rim edges. Used mainly on steel wheels.
Ll
- Leak Detection Fluid
- Liquid sprayed onto tyre or valve to identify air leaks. Produces visible bubbles where air is escaping.
- Locking Mechanism (Column Lock)
- Secures mount head in position during operation.
Mm
- Marking Crayon
- Marks: Damage location Repair points
- Mount / Demount Head (Duckhead)
- The tool head that guides the tyre bead over the rim. Designed to reduce friction and protect the wheel surface.
- Mounting Paste / Tyre Soap
- Lubricant used during tyre fitting. Prevents bead damage and helps tyre seat correctly on the rim.
Pp
- Patch (Repair Patch)
- Flat rubber piece applied inside the tyre to repair punctures. Used for internal-only repairs.
- Patch Stitch Roller
- Rolls patch onto tyre lining.
- Patch-Plug Combination
- Combines a patch (inside) + plug (through puncture). Considered a professional standard repair solution.
- Plastic Jaw Covers
- Protective covers fitted over steel clamps. Prevent alloy wheel damage.
- Protective Hood
- Covers rotating wheel during operation. Provides safety and triggers auto-spin function.
Qq
- Quick Release Nut / Wing Nut
- Secures the wheel tightly onto the balancer shaft.
Rr
- Rasp Tool (Reamer)
- Cleans and enlarges puncture hole.
- Rim / Alloy Wheel Protector
- Barrier placed between tool and rim surface
- Rim Seal / Rim Sealer
- Similar to bead sealer but often used more broadly on rims.
Tt
- TPMS Diagnostic Tool
- A handheld or tablet device used to: Diagnose tyre pressure systems Read sensor data Reset TPMS warning lights Essential for modern tyre fitting and servicing.
- TPMS Programming Tool
- Tool used to write or copy data onto programmable TPMS sensors. Required when fitting aftermarket or replacement sensors.
- Tread Depth Gauge
- Measures remaining tyre tread depth.
- Turntable
- The rotating platform that holds and spins the wheel during tyre removal and fitting. Uses clamps to secure the rim in place.
- Tyre Changer
- Machine used to remove and fit tyres onto wheels
- Tyre Lever (Tyre Iron)
- Physically pries the tyre bead over the rim edge.
- Tyre Lever Protector Sleeve
- Slides over the tyre lever tip.
- Tyre Lube (Liquid Lubricant)
- Liquid version of mounting paste.
- Tyre Repair Tools
- Tools such as rasps, cutters, and patch kits used to repair punctures.
- Tyre Spreader
- Opens tyre for internal inspection and repair. Often used in: Workshop environments Ensures technician can work safely inside tyre.
- Tyre Valves
- Components that allow inflation/deflation of tyres and maintain air pressure.
Vv
- Valve Core
- Small internal component inside the valve stem. Controls airflow when inflating/deflating tyres. Easily replaceable and a common cause of slow leaks.
- Valve Extension
- Lengthens access to tyre valve (common on commercial vehicles).
- Valve Key / Core Tool
- Removes and installs the tiny internal valve core
- Valve Mounter
- Pulls rubber snap-in valve through the rim hole
- Valve Stem / Snap-in Valve
- Complete valve unit fitted to the wheel. Rubber or metal body that holds air pressure.
- Vehicle Lift
- Hydraulic or mechanical platform used to raise vehicles for servicing.
- Vulcanising Cement (Tyre Repair Cement)
- Chemical adhesive used during puncture repairs. Bonds repair patches or plugs to the tyre via a vulcanisation process (heat or chemical curing). Essential for permanent repairs.
Ww
- Weight Strips / Rolls
- Bulk strips of small weights (e.g. 5g segments). Can be cut to required size.
- Wheel Balancer
- Equipment that ensures even weight distribution across a wheel and tyre assembly.
- Wheel Weight Pliers
- Remove and install knock-on weights
- Wheel Weights (Balancing Weights)
- Small weights attached to wheels to correct imbalance.
- Wire Brush
- Cleans rust, dirt, and debris from rim seating area