We have a wide range of tyre repair materials including patch and plug combos, universal patches, tube patches, radial patches and cross ply patches for use on motorcycle tyres, passenger car tyres, LGVs tyre and even truck and agricultural tyres.
The most common repair patches for passenger car tyres are the patch and plug combinations. With varying stem diameters from 4mm, 6mm, 9mm and 10mm, these patch and plug combinations are suitable for motorcycle tyres (4mm stem), passenger car tyres (6mm stem) and even LGV tyres (9mm+ stem).
It is illegal to repair a passenger car tyre puncture that is larger than 6mm.
See our guide to using Patch & Plug Combos below!
Not found the patch and plug repair kit combination you need?
Contact us now by calling 01527 883 580, emailing email@example.com or using our live chat. We'll be able to help source the materials you need to repair tyres, whatever solution it is you need.
How to repair a puncture using a patch and plug combination
- The first step to repairing a puncture is to find where it is, this should be fairly easy if the puncture is a large hole caused by something sharp, for example by a nail. Some instances like a slow puncture may require tyre baths or leak finders. These tools are designed to make finding the cause of a slow puncture a simple process.
- Mark a cross over the effected area using tyre marking chalk.
- Using a carbide cutter, or rema, make the puncture into a clean hole.
- Buff and clean the area using Liquid Rubber Buffer Cleaner (Buffing Soltution) and buffing accessories such as a Buffing Stone or Grit Flat Wheel. This creates a rough surface to enable the vulcanising solution, or glue, to bond with the rubber of the tyre.
- Once these steps have been taken the vulcanising solution, or glue, can be applied to the hole using a spiral cement tool.
- All patch and plug combos have a metal pin in the end which enables you to easily guide the plug through the hole and then pull through to create a perfect seal.
- Use a stitch roller and inner liner sealant over the patch
The repair is complete. All that is left to do now is cut the plug down to size and mount the tyre back onto the wheel.